molecalculator

Moles & Molar Mass

K to cv Formula for Molarity Conversion

Calculator No. 01-6894 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts a mass of solute and its molar mass into molarity (c) given a final solution volume (v), using the standard formula c = m / (mm × v in liters). You enter the solute mass in grams, the molar mass in g/mol, and the final volume in mL, and you get the concentration in mol/L (M) plus the same value in millimolar (mM).

Formula

The core relationship is:

c = m / (mm × V)

where:

  • c = molarity (mol/L, often written M)
  • m = mass of solute (g)
  • mm = molar mass of solute (g/mol)
  • V = final solution volume (L)

Because the calculator takes volume in mL, the expression divides by 1000 to convert mL to L: c = m / (mm × (v/1000)).

Worked Example

Using the default values: m = 2.922 g of NaCl, mm = 58.44 g/mol, v = 250 mL.

Step 1: convert volume to liters: 250 mL ÷ 1000 = 0.250 L.

Step 2: calculate moles of solute: 2.922 g ÷ 58.44 g/mol = 0.05000 mol.

Step 3: divide moles by volume: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L.

Step 4: convert to millimolar: 0.2000 M × 1000 = 200.00 mM.

The calculator returns 0.2000 mol/L and 200.00 mM.

Assumptions

  • The solute is pure and completely dissolved.
  • The volume is the final solution volume after dissolution, not the solvent volume added.
  • Temperature effects on volume are ignored (density of water assumed near 1 g/mL).
  • The molar mass is the formula weight of the anhydrous compound unless stated otherwise.

When to Use This Formula

This is the fundamental conversion for preparing solutions in chemistry and biology labs. You use it whenever you need to make a known concentration from a weighed solid. For example, making 500 mL of 0.1 M KCl requires calculating the needed mass: m = c × mm × V = 0.1 × 74.55 × 0.5 = 3.7275 g. The same formula works backward: if you weigh a sample and dissolve it to a known volume, you can find its concentration, which is how you standardize a solution or check a stock concentration.

How to Choose the Correct Molar Mass

The molar mass must match the exact chemical form you weigh. Common mistakes include using the anhydrous mass when you have a hydrate, or forgetting to account for water of crystallization. For instance, CuSO4 has a molar mass of 159.61 g/mol, but CuSO4·5H2O is 249.69 g/mol. If you weigh the pentahydrate but use the anhydrous value, your concentration will be about 36% too high. Always check the label of the reagent bottle and verify the formula includes any water molecules.

Common Mistakes and Unit Mix-Ups

  • Volume in mL instead of L: forgetting to divide by 1000 gives a concentration 1000 times too large.
  • Mass in mg instead of g: using mg without converting gives a concentration 1000 times too small.
  • Molar mass confusion: using the mass of a single atom instead of the whole molecule, or mixing up g/mol and g/mmol.
  • Final volume vs. solvent volume: adding solute to 250 mL of water then reading the final volume as 250 mL is wrong if the solute adds significant volume; you must dissolve then adjust to the final mark.
  • Rounding too early: rounding the molar mass to 58 instead of 58.44 changes the result by about 0.8%, which matters in quantitative work.

Limits of the Formula

This formula assumes ideal behavior and complete dissolution. It does not account for solute-solute interactions, which become significant at high concentrations (typically above 1 M for many salts). It also assumes the solution volume equals the sum of solvent and solute volumes, which is not strictly true because partial molar volumes differ. For precise work, especially with concentrated solutions, you should prepare by mass and use density tables, or measure the final volume accurately after dissolution. The formula also assumes the solute is non-volatile and stable in solution; if it hydrolyzes or decomposes, the actual concentration changes over time.

Relation to Dilution Calculations

Once you have a stock solution of known molarity, you often dilute it. The dilution formula C1V1 = C2V2 follows directly from the definition of molarity. For example, to make 100 mL of 0.05 M NaCl from a 0.2 M stock, you need V1 = (0.05 × 100) / 0.2 = 25 mL of stock, then add water to 100 mL total. This page’s calculator gives you the stock concentration; the dilution arithmetic is a separate step.

Frequently Asked Questions

What is the difference between molarity and molality? Molarity is moles of solute per liter of solution (mol/L). Molality is moles of solute per kilogram of solvent (mol/kg). Molarity changes with temperature because volume changes; molality does not, since mass is temperature-independent. For dilute aqueous solutions at room temperature, the numerical values are close because 1 L of water weighs about 1 kg, but they are not identical.

How do I convert from molarity to mg/mL? Multiply molarity by molar mass: mg/mL = M × mm. For example, 0.2 M NaCl (mm = 58.44) gives 0.2 × 58.44 = 11.688 g/L, which is 11.688 mg/mL. This is useful for preparing solutions from a liquid stock where you know the concentration in mg/mL.

Can I use this formula for acids and bases? Yes, the formula works for any solute. However, for strong acids and bases, the pH is not simply derived from molarity alone because of activity coefficients and water autoionization. For polyprotic acids, the molarity tells you the total acid concentration, not the concentration of H+ ions, which depends on the dissociation constant.

What if my solute is a liquid? For liquids, you typically measure volume, not mass. You need the density to convert volume to mass: mass = volume × density. Then use the same formula. For example, to make 1 L of 1 M HCl from concentrated HCl (about 37% w/w, density 1.19 g/mL), you calculate the mass of HCl needed (36.46 g), then find the volume of concentrated acid that contains that mass, accounting for the 37% purity.

Why does the calculator show millimolar as a second output? Many biological and biochemical applications use millimolar (mM) or micromolar (µM) concentrations. Showing both saves a conversion step and reduces the chance of unit errors when preparing buffers or reagents for assays.

Does temperature affect molarity? Yes, because the volume of the solution expands with temperature. A 1 M solution at 20 °C becomes slightly less than 1 M at 30 °C because the same amount of solute occupies a larger volume. For most teaching and routine lab work, this effect is small enough to ignore, but for precise analytical work, solutions are prepared and used at a controlled temperature, often 25 °C.

Follow your lab method, the safety data sheet (SDS) and your supervisor when preparing solutions.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →