The water ion-product formula is Kw = [H3O+][OH−]; at 25 °C in dilute water, Kw is approximately 1.00 × 10−14. This calculator uses Kw and either hydronium or hydroxide concentration to find the other concentration, then reports the corresponding pH and pOH.
Formula
The water ion-product constant is defined by Kw = [H3O+][OH−]. Rearranging gives [OH−] = Kw / [H3O+], which is the calculator’s headline result. Concentrations are in mol/L, so Kw is in (mol/L)2. The calculator then uses pH = −log10[H3O+] and pOH = −log10[OH−].
- Kw is the water ion-product constant at the solution’s temperature and conditions.
- [H3O+] is hydronium concentration in mol/L.
- [OH−] is hydroxide concentration in mol/L.
- pH and pOH are logarithmic measures and have no units.
At 25 °C, Kw is conventionally approximated as 1.00 × 10−14 for dilute aqueous solutions. Its value changes with temperature, so the calculator’s Kw field is an input rather than a universal constant. The usual shorthand [H+] means hydronium concentration in water; hydronium, H3O+, is the more chemically explicit notation.
Worked Example
Using the calculator’s default values, Kw = 1 × 10−14 (mol/L)2 and [H3O+] = 1 × 10−7 mol/L:
- Find hydroxide concentration: [OH−] = Kw / [H3O+] = (1 × 10−14) / (1 × 10−7) = 1 × 10−7 mol/L.
- Find pH: pH = −log10(1 × 10−7) = 7.0000000.
- Find pOH: pOH = −log10(1 × 10−7) = 7.0000000.
The displayed headline result is 1.0000 × 10−7 mol/L hydroxide. The unrounded values satisfy Kw = [H3O+][OH−] and, at the stated temperature, pH + pOH = pKw = 14.000.
Assumptions
- The solution is aqueous and sufficiently dilute for concentrations to be a useful approximation to activities.
- The entered Kw applies at the sample’s temperature; 1.00 × 10−14 is the approximate conventional value at 25 °C.
- Hydronium concentration is positive. Zero concentration is not physically meaningful here and cannot be used in a logarithm.
- The calculation concerns acid–base study and lab-planning arithmetic, not preparation for use on a person or animal.
How Kw Connects Acids, Bases, pH, and pOH
Water molecules exchange protons with one another. In a simplified equation, 2H2O ⇌ H3O+ + OH−. The equilibrium produces both ions, even in water without an added acid or base. Kw expresses the equilibrium relationship between their concentrations under the stated convention.
In neutral water at 25 °C, hydronium and hydroxide concentrations are equal. Since their product is about 1.00 × 10−14, each is about 1.00 × 10−7 mol/L, giving pH 7. This does not mean “neutral always equals pH 7”: neutrality means the two ion activities are equal. Because Kw changes with temperature, the pH of neutral water can differ from 7 at temperatures other than 25 °C.
An acidic aqueous solution has greater hydronium activity than hydroxide activity; a basic solution has greater hydroxide activity. At 25 °C in dilute solutions, this is commonly described by pH below or above 7, respectively. The familiar relation pH + pOH = 14 is specifically tied to pKw ≈ 14 at 25 °C, not a temperature-independent rule.
Using the Calculator and Reading Its Result
Enter the Kw appropriate to the temperature, then enter hydronium concentration in mol/L. The first result is the hydroxide concentration implied by those inputs. The remaining results show pH from the entered hydronium concentration and pOH from the calculated hydroxide concentration.
- For a pH-to-concentration conversion, hydronium concentration is 10−pH mol/L. Enter that value and use the calculated hydroxide result.
- For a hydroxide-to-hydronium conversion, rearrange the equation: [H3O+] = Kw / [OH−]. This calculator takes hydronium as its input, so calculate that value first or use the equation directly.
- For concentration given in mmol/L, convert to mol/L by dividing by 1000 before entering it. For example, 0.20 mmol/L is 0.00020 mol/L.
Use concentrations in mol/L, not mol/mL, and do not enter pH itself into the concentration field. The pH input must first be converted with 10−pH. Keep adequate significant figures: a small concentration error can shift pH because pH is logarithmic. The displayed rounding is for readability; it may make the product appear slightly different from the entered Kw.
Limits, Activity, and Common Misconceptions
The basic concentration form is most appropriate for dilute aqueous solutions. More exactly, equilibrium constants are defined using dimensionless activities rather than raw concentrations. In solutions with substantial ionic strength, activity coefficients can make pH calculated from concentration differ from measured or thermodynamic pH. Non-aqueous solvents also require their own equilibrium definitions; the water-based Kw should not be applied automatically.
Kw is not the same as Ka or Kb. Ka describes an acid’s dissociation equilibrium, while Kb describes a base’s reaction with water. Kw describes water’s ion product and links hydronium and hydroxide. For a conjugate acid–base pair in the same solvent and conditions, Ka × Kb = Kw under the standard equilibrium conventions.
A calculation is not a substitute for measurement when a sample’s actual pH matters. Temperature, dissolved salts, calibration, and electrode condition can affect a pH reading. For lab work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Frequently Asked Questions
What is the Kw acid-base formula?
Kw = [H3O+][OH−]. Rearranged, [OH−] = Kw / [H3O+] or [H3O+] = Kw / [OH−].
What is Kw at 25 °C?
For dilute water, the conventional approximate value is 1.00 × 10−14 (mol/L)2. The value varies with temperature and should not be treated as universal.
Is Kw always 1 × 10−14?
No. That is the familiar approximate value at 25 °C. Use a value appropriate to the temperature and equilibrium convention for the problem.
How are Kw, pH, and pOH related?
Taking negative base-10 logarithms gives pH + pOH = pKw, where pKw = −log10(Kw). At 25 °C, pKw is approximately 14, so pH + pOH ≈ 14.
Does neutral water always have pH 7?
No. Neutrality means equal hydronium and hydroxide activities. At 25 °C in dilute water that corresponds approximately to pH 7, but temperature changes Kw and therefore the pH of neutral water.
What is the difference between Kw and Ka?
Kw is the ion-product constant for water. Ka is an acid dissociation constant for a particular acid. They describe related but different equilibria; for a conjugate acid–base pair, Ka × Kb = Kw under matching conditions.
Related
Formula used
in kw | Kw at the solution temperature | (mol/L)^2 | 1e-14 | 0 in h | Hydronium concentration [H3O+] | mol/L | 1e-7 | 0 in oh | Hydroxide concentration [OH-] | mol/L | 1e-7 | 0 out ohcalc | Hydroxide concentration from Kw and [H3O+] | mol/L | kw / h | 4 out ph | pH from [H3O+] | -log10(h) | 7 out poh | pOH from calculated [OH-] | -log10(ohcalc) | 7
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline