This calculator converts revolutions per minute (RPM) to rotational velocity expressed in radians per second (rad/s), the standard SI unit. Enter the RPM value and the calculator returns the equivalent angular speed in rad/s, along with the frequency in hertz (Hz) for reference.
Formula
The relationship between RPM and rotational velocity (angular speed) is:
ω = (RPM × 2π) / 60
- ω = rotational velocity in radians per second (rad/s)
- RPM = revolutions per minute (rev/min)
- 2π = number of radians in one full revolution (≈ 6.283185307)
- 60 = number of seconds in one minute
Equivalently, frequency in hertz (Hz) is simply RPM divided by 60, because one revolution per second equals one hertz.
Worked Example
Using the default value of 1500 RPM (a common motor speed):
- Multiply RPM by 2π: 1500 × 6.283185307 = 9424.777961
- Divide by 60: 9424.777961 / 60 = 157.079633 rad/s
The calculator rounds to 4 decimal places, giving 157.0796 rad/s. The frequency is 1500 / 60 = 25.0000 Hz.
Assumptions
- RPM refers to full revolutions (360°) per minute.
- The conversion is purely mathematical; it does not depend on radius, mass, or torque.
- Radians are dimensionless, so rad/s is dimensionally equivalent to 1/s.
Why Convert RPM to Rotational Velocity?
Engineers and physicists use radians per second in most rotational equations because it simplifies the math. For example, linear speed at the edge of a rotating object is v = ω × r, where r is the radius. If you have ω in rad/s, you don’t need extra conversion factors. Similarly, rotational kinetic energy is KE = ½ I ω², and power transmitted by a shaft is P = τ × ω (torque times angular speed). Using rad/s makes these formulas work directly with SI units.
In everyday contexts, RPM is more intuitive—car engines, hard drives, and washing machine spin cycles are all rated in RPM. But when you open a physics textbook or a machine design manual, you’ll almost always see rad/s. This calculator bridges that gap.
How to Read the Result
The first output, rotational velocity in rad/s, is the number you plug into formulas. The second output, frequency in Hz, tells you how many complete rotations occur each second. For example, 1500 RPM means 25 revolutions per second, so the frequency is 25 Hz. If you need the period (time per revolution), take the reciprocal: 1/25 = 0.04 seconds per revolution.
One radian is about 57.3 degrees, so a full circle (360°) equals 2π ≈ 6.283 radians. Therefore, a rotational velocity of 157 rad/s means the object sweeps out 157 radians every second—about 25 full turns.
Common Mistakes and Misconceptions
- Forgetting the factor 2π: Some people simply divide RPM by 60 to get rev/s and think that’s the rotational velocity. That gives frequency in Hz, not rad/s.
- Mixing up RPM and rad/s in torque calculations: If you use RPM in P = τ × ω, the power will be wrong by a factor of 2π/60. Always convert to rad/s first.
- Assuming rotational velocity depends on radius: The angular speed is the same for every point on a rigid rotating body, but linear speed increases with distance from the center.
- Using degrees per second: Some calculators or software use deg/s. To convert rad/s to deg/s, multiply by 180/π ≈ 57.2958.
Practical Examples
Here are a few real-world situations where you might need this conversion:
- Electric motor: A 4-pole induction motor on 50 Hz supply runs at about 1500 RPM (synchronous speed). That’s 157 rad/s. If the motor drives a pulley of radius 0.1 m, the belt speed is 157 × 0.1 = 15.7 m/s.
- CD or DVD drive: A CD spins at up to 500 RPM during reading. That’s about 52.4 rad/s. The linear speed at the outer edge (radius 0.06 m) is 3.14 m/s.
- Centrifuge: A lab centrifuge at 10,000 RPM gives ω = 1047 rad/s. With a rotor radius of 0.1 m, the relative centrifugal force is ω² × r / g ≈ 11,200 × g.
Alternatives and Related Units
Besides rad/s, rotational speed can be expressed in:
- Revolutions per second (rev/s or rps): RPM / 60. This is the frequency in Hz.
- Degrees per second (°/s): Multiply rad/s by 57.2958.
- Revolutions per hour (rev/h): Multiply RPM by 60.
If you need linear velocity (m/s) at a given radius, multiply ω (in rad/s) by the radius in meters. This is straightforward once you have rad/s.
Frequently Asked Questions
How do I convert RPM to rad/s manually?
Multiply the RPM value by 2π (≈ 6.2832) and then divide by 60. For example, 3000 RPM × 6.2832 / 60 = 314.16 rad/s.
What is the difference between rotational velocity and linear velocity?
Rotational velocity (ω) measures how fast an object rotates, in radians per second. Linear velocity (v) measures how fast a point on the object moves in a straight line, in meters per second. They are related by v = ω × r, where r is the distance from the axis of rotation.
Is rad/s the same as Hz?
No. Hertz (Hz) counts complete cycles per second, while rad/s counts radians per second. Since one cycle = 2π radians, 1 Hz = 2π rad/s. For example, 10 Hz = 62.83 rad/s.
Why do engineers use rad/s instead of RPM?
Because rad/s is the SI unit and makes formulas like P = τω and v = ωr work without extra conversion constants. It also simplifies calculus involving rotational motion, since the derivative of angle (in radians) with respect to time is directly ω.
Can I convert RPM to linear speed directly?
Only if you know the radius. The formula is v (m/s) = (RPM × 2π / 60) × r (m). For example, a wheel of radius 0.3 m at 100 RPM gives v = (100 × 6.2832 / 60) × 0.3 = 3.14 m/s.
What is a typical RPM for a car engine at highway speed?
Most cars cruise at 1500–3000 RPM depending on gear and speed. That corresponds to 157–314 rad/s. The exact value depends on the gear ratio and tire size.
Related
Formula used
in rpm | RPM | rev/min | 1500 | 0 out w | Rotational velocity | rad/s | rpm * 2 * pi / 60 | 4 out f | Frequency | Hz | rpm / 60 | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol