The molar mass of anhydrous magnesium(II) sulfate, MgSO4, is 120.36 g/mol. Enter the number of magnesium, sulfur, and oxygen atoms in a formula unit to calculate its molar mass; the calculator returns the sum in grams per mole.
Formula
Molar mass is the sum of each element’s atomic weight multiplied by the number of its atoms in the chemical formula:
M = nMg(24.305) + nS(32.06) + nO(15.999)
- M is the formula molar mass in g/mol.
- nMg, nS, and nO are the counts of magnesium, sulfur, and oxygen atoms in one formula unit.
- 24.305, 32.06, and 15.999 g/mol are the abridged standard atomic weights used for magnesium, sulfur, and oxygen, respectively.
For MgSO4, there is one atom of each magnesium and sulfur and four oxygen atoms. The Roman numeral II identifies magnesium’s +2 oxidation state; it is not an extra atom and does not change the formula’s atom count.
Worked Example
Using the calculator’s default values, nMg = 1, nS = 1, and nO = 4:
M = 1 × 24.305 + 1 × 32.06 + 4 × 15.999
M = 24.305 + 32.06 + 63.996 = 120.361 g/mol
Rounded to the calculator’s three decimal places, the result is 120.361 g/mol. This is commonly reported as 120.36 g/mol at two decimal places.
Assumptions
- The formula entered represents anhydrous MgSO4, with no water of crystallization.
- The atomic weights are the specified abridged standard values; actual isotopic composition can cause slight variation.
- The calculation gives formula molar mass, not the mass of a particular sample or its solution.
Why Hydrated Magnesium Sulfate Has a Different Mass
Magnesium sulfate commonly occurs as a hydrate: water molecules are included in the crystal formula. Each water molecule adds two hydrogen atoms and one oxygen atom, for a contribution of about 18.015 g/mol. The hydrate’s molar mass is therefore higher than that of anhydrous MgSO4.
For example, magnesium sulfate heptahydrate is MgSO4·7H2O. Its molar mass is approximately:
120.361 + 7 × 18.015 = 246.466 g/mol
That value is about 246.47 g/mol. The dot in the formula means seven water molecules are associated with each MgSO4 unit in the hydrate; it does not mean that the salt has a different magnesium-to-sulfate ratio. If a container or reference specifies a hydrate, use that complete formula rather than the anhydrous value.
Using Molar Mass in Calculations
Molar mass connects a measured mass to an amount of substance. To convert sample mass to moles, divide the mass in grams by molar mass in g/mol:
n = m / M
Here, n is amount in moles and m is sample mass in grams. For instance, 12.0361 g of pure anhydrous MgSO4 corresponds to 12.0361 ÷ 120.361 = 0.10000 mol. Conversely, multiply moles by molar mass to calculate the corresponding mass.
This conversion is useful in general chemistry and laboratory arithmetic, but the result assumes the material is the stated compound and sufficiently pure for the calculation. A hydrate, mixture, or impure sample will not behave as though every gram were anhydrous MgSO4. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Common Mistakes and Limits
- Leaving out water: MgSO4 and MgSO4·7H2O have different molar masses. Check the full formula, including any hydrate dot and number.
- Confusing molar mass and sample mass: 120.36 g/mol is a property of the stated formula, not a claim that every sample weighs 120.36 g.
- Misreading the Roman numeral: “II” indicates the magnesium ion’s oxidation state. It is not a multiplier or a second magnesium atom.
- Mixing units: The calculator reports g/mol. A sample mass in milligrams must be converted to grams before using the simple mass-to-moles equation.
- Over-interpreting precision: Atomic weights and the stated material’s purity limit how many digits are meaningful. The calculator’s three decimal places are a consistent arithmetic display, not a guarantee of experimental accuracy.
The calculation also does not determine how much material is present in a mixture, how much dissolves, or what concentration a solution has. Those questions require additional information, such as sample purity, solution volume, or solubility under specified conditions.
Frequently Asked Questions
What is the molar mass of MgSO4?
Anhydrous magnesium sulfate has a calculated molar mass of 120.361 g/mol using the atomic weights shown here, commonly rounded to 120.36 g/mol.
What is the molar mass of MgSO4·7H2O?
Magnesium sulfate heptahydrate is approximately 246.466 g/mol, or 246.47 g/mol when rounded to two decimal places.
Does magnesium II sulfate mean a different compound from magnesium sulfate?
No. “Magnesium(II)” specifies the +2 oxidation state of magnesium. The formula MgSO4 already expresses the compound’s composition and charge balance.
How many moles are in 1 gram of anhydrous MgSO4?
Divide 1 g by 120.361 g/mol: approximately 0.008308 mol, or 8.308 mmol.
Why might a label give a different molar mass?
It may refer to a hydrate rather than anhydrous MgSO4, use a different rounding convention, or specify a different material form. Compare the complete chemical formula before comparing values.
Related
Formula used
in mg | Magnesium atoms per formula unit | - | 1 | 0 in s | Sulfur atoms per formula unit | - | 1 | 0 in o | Oxygen atoms per formula unit | - | 4 | 0 out mm | Molar mass | g/mol | mg * 24.305 + s * 32.06 + o * 15.999 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Serial Dilution Calculation Examples0.2000 mol/L
- Serial Dilution: How It Works & Why It Matters1.000 × 10−5 mol/L
- Serial Dilution A Level Biology: How To Do It30
- Serial vs Simple Dilution: Key Differences0.2000 mol/L
- Milton Tablet Dilution: Mixing Guide0.2000 mol/L
- qPCR Serial Dilution Standard Curve: How to Build One100,000 copies/µL