molecalculator

Moles & Molar Mass

Magnesium Sulfate Hydrate Formula Mass Calculator

Calculator No. 01-6634 · Updated · Formula and assumptions shown below

Formula mass 246.466 u
Molar mass
246.466 g/mol
= Formula mass
Water molecules per formula unit
7
Set in the form below
You enter
Water molecules per formula unit
You get
Formula mass (u), Molar mass (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator finds the formula mass of a magnesium sulfate hydrate from its chemical formula, including the number of water molecules shown after the dot. Enter the hydration number, and it returns the formula mass in atomic mass units (u) and the corresponding molar mass in grams per mole (g/mol).

Formula

For magnesium sulfate hydrate written MgSO4·nH2O, formula mass is the sum of the atomic masses of every atom in one formula unit:

M = 24.305 + 32.06 + 4(15.999) + n[2(1.008) + 15.999]

  • M is the formula mass in u, numerically equal to the molar mass in g/mol.
  • n is the number of water molecules per magnesium sulfate formula unit; it is a whole-number count.
  • 24.305 u is the atomic weight used for Mg, 32.06 u for S, 15.999 u for O, and 1.008 u for H.

The sulfate group contributes four oxygen atoms, while each water molecule contributes two hydrogen atoms and one oxygen atom. The calculator allows integer values from 0 to 20, covering anhydrous magnesium sulfate and common hydrates without treating the hydration number as a continuous quantity. The molar-mass output has the same numerical value as the formula-mass output, but its unit is g/mol rather than u.

Worked Example

For the default value n = 7, the compound is MgSO4·7H2O, commonly called magnesium sulfate heptahydrate.

First, the anhydrous magnesium sulfate portion is:

24.305 + 32.06 + 4 × 15.999 = 120.361 u

One water molecule contributes:

2 × 1.008 + 15.999 = 18.015 u

Seven water molecules contribute:

7 × 18.015 = 126.105 u

Adding the two portions gives:

120.361 + 126.105 = 246.466 u, which rounds to 246.466 u at the calculator’s three decimal places. Its molar mass is 246.466 g/mol.

Assumptions

  • The formula is MgSO4·nH2O, with an integer n and no other elements or attached species.
  • Atomic weights use the stated conventional values; natural isotopic variation and measurement uncertainty are not represented.
  • The result is a formula mass calculated from composition, not a measurement of a particular sample’s purity or water content.

What “Hydrate” Means

A hydrate is a compound whose crystal structure contains a definite number of water molecules associated with each formula unit. In a formula such as MgSO4·7H2O, the centered dot separates the salt composition from the waters of crystallization. It does not mean that seven water molecules are multiplied by the entire magnesium sulfate formula; their atoms are added to the atom count.

The water in a crystalline hydrate is part of the compound’s stated composition. That is different from liquid water merely wetting a powder or water used as a solvent in a solution. Formula mass describes the specified chemical formula, so a sample that has partly lost water may no longer match the hydrate formula printed on its label.

Common Magnesium Sulfate Hydrates

The hydration number changes the formula mass substantially because each water molecule adds 18.015 u. Commonly encountered forms include:

  • Anhydrous magnesium sulfate, MgSO4 (n = 0): 120.361 u, or 120.361 g/mol.
  • Magnesium sulfate monohydrate, MgSO4·H2O (n = 1): 138.376 u, or 138.376 g/mol.
  • Magnesium sulfate heptahydrate, MgSO4·7H2O (n = 7): 246.466 u, or 246.466 g/mol.

Heptahydrate is often known as Epsom salt. The familiar name identifies a particular hydrate, not every material called magnesium sulfate. For a calculation, use the hydration state actually specified for the substance rather than assuming that all magnesium sulfate is the heptahydrate.

Formula Mass, Molar Mass, and Molecular Mass

These terms are related but describe quantities with different units. Formula mass is the sum of the atomic masses in a formula unit and is commonly expressed in u. Molar mass is the mass of one mole of those formula units, expressed in g/mol. Their numerical values match when the same atomic-weight values are used: for example, 246.466 u per formula unit corresponds to 246.466 g/mol.

“Molecular mass” is often used informally for this kind of calculation, but magnesium sulfate is an ionic compound, so its solid structure is described by formula units rather than separate MgSO4 molecules. Calling the result a formula mass is therefore more precise. In practical calculations involving weighed quantities and moles, the needed unit is normally g/mol.

Using the Result Correctly

Choose the hydration number from the actual chemical formula. A missing or misread numeral after the dot is a common source of error: MgSO4·H2O and MgSO4·7H2O have very different molar masses. The calculator’s input is a count of water molecules, not a percentage of water, a sample mass, or a solution concentration.

For a pure substance with a known hydrate formula, the molar mass can convert between mass and amount of substance:

amount in mol = sample mass in g ÷ molar mass in g/mol

For example, using the heptahydrate value, 24.6466 g corresponds nominally to 0.10000 mol because 24.6466 ÷ 246.466 = 0.10000. Real sample calculations may need additional information about purity, absorbed moisture, or the material’s actual hydration state. Formula mass alone does not establish those properties. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Frequently Asked Questions

What is the formula mass of magnesium sulfate heptahydrate?
For MgSO4·7H2O, it is 246.466 u using the atomic weights stated here. The corresponding molar mass is 246.466 g/mol.

What is the molar mass of anhydrous magnesium sulfate?
For MgSO4 with no water of crystallization, the calculated molar mass is 120.361 g/mol.

Why does the hydrate have a higher formula mass?
Each water molecule adds two hydrogen atoms and one oxygen atom, totaling 18.015 u with the stated atomic weights. A hydrate with more waters therefore has a higher formula mass.

Is formula mass the same as molar mass?
They have the same numerical value for the same formula when these units are used, but the quantities and units differ: u for formula mass and g/mol for molar mass.

Does the dot in MgSO4·7H2O mean multiplication?
It separates the salt formula from its waters of crystallization. Count seven water molecules in addition to the atoms in MgSO4; do not multiply the entire salt formula by seven.

Related

Formula used
in n | Water molecules per formula unit | - | 7 | 0 | 20
out mm | Formula mass | u | 24.305 + 32.06 + 4 * 15.999 + n * (2 * 1.008 + 15.999) | 3
out mol | Molar mass | g/mol | mm | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →