molecalculator

Moles & Molar Mass

Proton + Electron Neutron? Particle Math Explained

Calculator No. 01-6861 · Updated · Formula and assumptions shown below

Mass difference (mn - mp - me) 0.000840 u
Energy equivalent (MeV)
0.7825 MeV
= Mass difference (mn − mp − me) × 931.494
Proton mass
1.007276 u
Set in the form below
Electron mass
0.000549 u
Set in the form below
You enter
Proton mass (u), Electron mass (u), Neutron mass (u)
You get
Mass difference (mn - mp - me) (u), Energy equivalent (MeV) (MeV)
Rounding
6 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Protons and electrons do not combine to form neutrons under ordinary conditions; the neutron is a separate particle with its own quark composition. However, in extreme environments like the core of a collapsing star, a proton can capture an electron to become a neutron (electron capture), and a free neutron decays back into a proton, an electron, and an antineutrino. This page explains the particle physics, the math of combining charges and masses, and why the simple addition “proton + electron = neutron” is a useful mnemonic but not a literal reaction.

Formula

The key equation is the mass difference:

Δm = mn − (mp + me)

where mn is the neutron mass, mp the proton mass, and me the electron mass, all in atomic mass units (u). The energy equivalent is ΔE = Δm × 931.494 MeV/u, using Einstein’s E = mc² with 1 u = 931.494 MeV/c².

For the default values (proton 1.007276 u, electron 0.000549 u, neutron 1.008665 u), Δm = 1.008665 − (1.007276 + 0.000549) = 0.000840 u, and ΔE = 0.000840 × 931.494 ≈ 0.7825 MeV. This positive Δm means the neutron is heavier than the proton plus electron combined, so the combination is energetically unfavorable—the neutron cannot be a stable bound state of just those two particles.

Worked Example

Using the default inputs:

  1. Add proton and electron masses: 1.007276 + 0.000549 = 1.007825 u
  2. Subtract from neutron mass: 1.008665 − 1.007825 = 0.000840 u
  3. Convert to energy: 0.000840 × 931.494 = 0.7825 MeV

The calculator shows 0.000840 u and 0.7825 MeV, matching these steps.

Assumptions

  • Masses are for free particles at rest (not bound in atoms).
  • Atomic mass units use the carbon-12 standard.
  • Energy conversion assumes exact E=mc² with 1 u = 931.494 MeV/c².
  • No binding energy or nuclear effects are included—this is a bare particle comparison.

Why the Neutron Is Heavier Than Proton + Electron

If a neutron were just a proton plus an electron, its mass would be the sum of the two, but it is actually about 0.000840 u (0.7825 MeV) heavier. This extra mass comes from the strong force binding energy inside the neutron. The neutron consists of three quarks (one up, two down), and the gluon fields that hold them together carry energy, which contributes to the total mass via E=mc². In contrast, a proton has two up quarks and one down quark, and its quark configuration is slightly lighter. The mass difference is small—about 0.14% of the neutron’s mass—but it is crucial for nuclear physics: it makes the free neutron unstable, with a mean lifetime of about 880 seconds.

Electron Capture: The Real Reaction

In certain atomic nuclei, a proton can absorb an electron from the inner electron cloud (usually a K-shell electron) and transform into a neutron, emitting a neutrino. The reaction is written as:

p + e⁻ → n + νe

This process, called electron capture, occurs spontaneously only when the nucleus is neutron-poor and the energy released (the Q-value) is positive. For a free proton, electron capture is impossible because the proton is lighter than the neutron plus the electron’s rest mass (as the calculator shows, the neutron is heavier by 0.7825 MeV). Inside a nucleus, the binding energy of the resulting nucleus can compensate, making the process energetically favorable. For example, potassium-40 undergoes electron capture to become argon-40, and beryllium-7 captures an electron to become lithium-7. In extreme environments like supernovae, electron capture on protons produces neutrons, enabling the formation of neutron stars.

Neutron Decay: The Reverse Process

A free neutron decays via beta-minus decay:

n → p + e⁻ + ν̄e

Here, a down quark in the neutron turns into an up quark, emitting a W⁻ boson that then decays into an electron and an antineutrino. The mass difference (0.7825 MeV) is released as kinetic energy of the products. This decay is allowed because the neutron’s mass exceeds the proton’s plus the electron’s (and antineutrino’s) mass. The antineutrino has negligible mass, so the energy budget works. This asymmetry—neutron heavier than proton+electron—is why free neutrons are radioactive while protons are stable.

Charge and Lepton Number Conservation

In any particle reaction, electric charge and lepton number must be conserved. The proton has charge +1, the electron has charge −1, so their sum is 0, which matches the neutron’s charge of 0. However, the electron is a lepton, and the neutron is a baryon (made of quarks). Simply combining a proton (baryon) and an electron (lepton) would give a particle with baryon number 1 and lepton number 1, but the neutron has baryon number 1 and lepton number 0. To conserve lepton number, electron capture must emit a neutrino (lepton number −1 for antineutrino, or +1 for neutrino depending on convention). In the simple addition “proton + electron = neutron”, lepton number is violated, which is why the reaction requires an extra particle (a neutrino) to balance the books.

Common Misconceptions

  • “Neutrons are made of protons and electrons”—No, neutrons are made of quarks (udd), not of protons and electrons. The old proton-electron model was abandoned after the discovery of the neutron’s spin and magnetic moment.
  • “Electron capture is the same as proton + electron = neutron”—It is similar, but it only happens inside a nucleus, not in free space, and it always produces a neutrino.
  • “The mass difference is negligible”—0.7825 MeV is actually significant; it is the energy that drives beta decay and powers the weak interaction.
  • “Protons and electrons attract, so they should stick together”—They do form hydrogen atoms, but the electron is in a cloud, not a constituent of the proton. The neutron is a different particle entirely.

Practical Uses of This Calculation

This mass-difference calculation is used in nuclear physics to determine whether a decay or capture process is energetically possible. For example, to check if a nucleus can undergo electron capture, you compare the mass of the parent atom with the mass of the daughter atom plus the binding energy of the captured electron. The calculator above gives the bare-particle mass difference, which you can add to nuclear binding energies to get the Q-value. It is also used in particle physics to calculate the energy released in beta decay and to design detectors that measure neutrino energies.

Frequently Asked Questions

Can a proton and an electron ever form a neutron?

Only inside a nucleus via electron capture, and only when the nuclear binding energy makes the process energetically favorable. A free proton cannot capture a free electron to become a neutron because the neutron is heavier by 0.7825 MeV, and energy conservation would be violated.

Why is the neutron heavier than a proton plus an electron?

The extra mass comes from the strong force binding energy among the quarks inside the neutron. The gluon fields store energy, which contributes to the neutron’s rest mass via E=mc². This is a consequence of the strong interaction, not electromagnetism.

What is the difference between electron capture and beta decay?

Electron capture is a process where a nucleus absorbs an inner electron and emits a neutrino, converting a proton to a neutron. Beta decay (beta-minus) is when a neutron decays into a proton, emitting an electron and an antineutrino. They are inverse processes, but electron capture requires a nucleus, while beta decay can happen for a free neutron.

Does the mass difference affect nuclear stability?

Yes. The mass difference between parent and daughter nuclei determines whether a decay is possible. For example, if a nucleus is neutron-poor, electron capture may be allowed if the daughter nucleus has lower mass. The 0.7825 MeV is a typical energy scale for weak decays.

Is the neutron a composite of a proton and an electron in any model?

Historically, some physicists proposed that, but it was disproven by experiments measuring the neutron’s spin and magnetic moment. The neutron has spin 1/2, same as the proton, but a composite of proton (spin 1/2) and electron (spin 1/2) could have spin 0 or 1, not 1/2, unless additional orbital angular momentum is invoked, which would not match observations.

How do I use this calculator for nuclear reactions?

Enter the masses of the initial and final particles (in atomic mass units) to find the mass difference and energy release. For a nuclear reaction, replace the proton and electron masses with the masses of the parent and daughter atoms (including electrons) to get the Q-value. Remember to include the neutrino mass (negligible) and any binding energies if needed.

Safety and Scope

This calculator is for educational and theoretical physics use only. It does not involve any hazardous materials or procedures. For lab work involving radioactive isotopes, always follow your institution’s safety guidelines and the relevant regulations.

Related

Formula used
in mp | Proton mass | u | 1.007276 | 0
in me | Electron mass | u | 0.000549 | 0
in mn | Neutron mass | u | 1.008665 | 0
out diff | Mass difference (mn - mp - me) | u | mn - mp - me | 6
out energy | Energy equivalent (MeV) | MeV | diff * 931.494 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →