The specific gas constant, usually written as Rs, is the universal gas constant divided by a gas’s molar mass. Its value depends on the gas: for dry air, a common engineering value is 287.05 J/(kg·K), while water vapor is about 461.5 J/(kg·K). This calculator finds Rs from a gas’s molar mass and returns the result in J/(kg·K), equivalent to m²/(s²·K).
Formula
The specific gas constant is the universal gas constant divided by molar mass:
Rs = R / M
- Rs is the specific gas constant, in J/(kg·K).
- R is the universal gas constant, in J/(mol·K). The SI value is 8.31446261815324 J/(mol·K).
- M is molar mass, converted from g/mol to kg/mol by dividing by 1000.
Accordingly, the calculator evaluates Rs = R / (M / 1000). The universal gas constant is a fixed physical constant; the specific gas constant varies with the gas’s molar mass and, for mixtures, with its composition.
Worked Example
Using the calculator defaults, R = 8.31446261815324 J/(mol·K) and M = 28.965 g/mol:
- Convert molar mass to kg/mol: 28.965 / 1000 = 0.028965 kg/mol.
- Divide the universal gas constant by molar mass: 8.31446261815324 / 0.028965 ≈ 287.0025 J/(kg·K).
- Rounded to the calculator’s two decimal places, Rs = 287.00 J/(kg·K).
This is a representative value for dry air using the entered molar mass. The result can differ slightly from a published reference value if its source uses a different air composition or molar mass.
Assumptions
- The input molar mass represents the gas or mixture of interest and is expressed in g/mol.
- The calculation uses the universal gas constant in SI units and converts molar mass to kg/mol.
- The result is a mass-specific gas constant; no particular temperature, pressure, or phase is assumed.
What the Specific Gas Constant Means
The universal gas constant relates pressure, volume, amount of substance, and absolute temperature in the ideal gas law, pV = nRT. In many engineering applications, gas mass is more convenient than moles. Substituting n = m/M and dividing by the gas mass gives the mass-based form:
p = ρRsT
Here p is absolute pressure in pascals, ρ is mass density in kg/m³, and T is absolute temperature in kelvins. This rearrangement explains why Rs has units of J/(kg·K): it connects a gas’s temperature and density to its pressure. Because one joule equals one kg·m²/s², J/(kg·K) is dimensionally equal to m²/(s²·K).
The constant does not mean that every gas behaves ideally under all conditions. It is a property used in the ideal-gas relationship; real gases can depart from that model, especially at high pressure or near condensation.
Common Values and Comparisons
Values below are approximate. They use the relation Rs = R/M and representative molar masses; reference tables may show slightly different figures because composition and rounding conventions differ.
- Dry air: about 287.05 J/(kg·K), widely used for atmospheric and engineering calculations.
- Water vapor: about 461.5 J/(kg·K), reflecting its much lower molar mass than air.
- Nitrogen: about 296.8 J/(kg·K).
- Oxygen: about 259.8 J/(kg·K).
- Carbon dioxide: about 188.9 J/(kg·K).
- Helium: about 2077 J/(kg·K), much higher because helium has a very small molar mass.
A useful comparison is that lighter gases have larger specific gas constants, while heavier gases have smaller ones. The universal gas constant itself does not change from one gas to another; dividing by each gas’s molar mass creates the different mass-specific values.
Choosing the Right Value
For a pure gas, enter its molar mass in g/mol. For a mixture, use the mixture’s mean molar mass, not the molar mass of one component. For a mixture with mole fractions yi, its mean molar mass is Mmix = Σ yiMi, where the mole fractions sum to 1. Then calculate Rs = R/Mmix, with consistent units.
For dry air, engineering references often use 287.05 J/(kg·K) directly. That figure corresponds to a conventional average composition of dry air. Humid air has a different effective molar mass, so its specific gas constant is not exactly the dry-air value. If an application specifies a particular composition or reference constant, follow that convention rather than mixing values from different sources.
Keep the units aligned. Dividing R in J/(mol·K) directly by molar mass in g/mol produces a number a thousand times too small for J/(kg·K), unless the conversion from grams to kilograms is included. This calculator performs that conversion explicitly.
When It Is Used and Where It Can Mislead
Rs appears in ideal-gas calculations for density, pressure, and temperature, including atmospheric models, gas-flow estimates, and thermodynamic relationships. For instance, the ideal-gas density equation can be written as ρ = p/(RsT). Use absolute pressure and kelvins in that expression; gauge pressure and Celsius temperatures do not fit the equation as written.
The formula assumes the gas can be represented by a well-defined molar mass. It does not account for real-gas effects, chemical changes, or a changing mixture composition. If accuracy matters under conditions where ideal behavior is questionable, use a suitable real-gas model and the relevant substance data. A correct Rs value alone does not make an ideal-gas calculation reliable outside its assumptions.
Frequently Asked Questions
What is the specific gas constant for air?
For dry air, a common value is 287.05 J/(kg·K), also written as 287.05 m²/(s²·K). The exact calculated value depends slightly on the air molar mass used.
Is the specific gas constant the same as the universal gas constant?
No. The universal gas constant is 8.31446261815324 J/(mol·K) for every ideal gas. The specific gas constant is that value divided by the gas’s molar mass, giving units per kilogram.
Why does water vapor have a higher specific gas constant than air?
Water vapor has a lower molar mass than dry air. Dividing the same universal gas constant by a smaller molar mass gives a larger specific gas constant.
Does the specific gas constant change with temperature?
For a gas with fixed composition, its specific gas constant is determined by molar mass and does not change with temperature. Temperature affects the gas state and the accuracy of an ideal-gas model, not this composition-based constant.
What units should I use in the ideal-gas equation with Rs?
Use Rs in J/(kg·K), pressure in pascals, density in kg/m³, and temperature in kelvins for p = ρRsT. Convert gauge pressure to absolute pressure before using the equation.
Related
Formula used
in r | Universal gas constant | J/(mol·K) | 8.31446261815324 | 0 in m | Molar mass | g/mol | 28.965 | 0 out rs | Specific gas constant | J/(kg·K) | r / (m / 1000) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s