The universal gas constant is R = 0.008314462618 kJ/(mol·K), or about 0.00831446 kJ/(mol·K). It is a molar constant; it is not expressed in kJ/(kg·K) unless divided by a gas’s molar mass, which gives that gas’s specific gas constant.
Formula
For a particular gas, divide the universal gas constant by the gas’s molar mass:
Rs = R / M
- Rs is the specific gas constant, in kJ/(kg·K).
- R is the universal gas constant, 0.008314462618 kJ/(mol·K).
- M is the gas’s molar mass, in kg/mol. Enter a positive molar mass; the calculator’s default, 0.028965 kg/mol, is an approximate molar mass for dry air.
The unit cancellation is essential: [kJ/(mol·K)] / [kg/mol] = kJ/(kg·K). The calculator also displays the universal molar constant as a reference value. Its first result is the specific gas constant for the entered gas.
Worked Example
Using the default molar mass of dry air, M = 0.028965 kg/mol:
- Start with Rs = R / M.
- Substitute the universal constant and the default molar mass: Rs = 0.008314462618 kJ/(mol·K) / 0.028965 kg/mol.
- Divide: Rs ≈ 0.287002 kJ/(kg·K).
Rounded to the calculator’s six decimal places, the specific gas constant for this default is 0.287002 kJ/(kg·K). The universal constant remains 0.008314462618 kJ/(mol·K); changing the gas’s molar mass changes the specific value, not the universal one.
Assumptions
- The input is the molar mass of one gas, in kg/mol, not g/mol.
- The universal gas constant is the exact SI value converted from 8.31446261815324 J/(mol·K) to kJ/(mol·K), using 1 kJ = 1000 J.
- The dry-air molar mass used as the default is approximate; actual air composition varies with humidity and composition.
Universal and Specific Gas Constants
The universal gas constant, commonly written R, is the proportionality constant in the ideal-gas equation when the amount of gas is measured in moles: pV = nRT. Its SI value is 8.31446261815324 J/(mol·K). Since 1 kJ equals 1000 J, the same constant is 0.00831446261815324 kJ/(mol·K).
That molar unit matters. A value in kJ/(kg·K) is usually the specific gas constant, often written Rs or Rspecific. It is the universal constant expressed per unit mass rather than per mole. Different gases have different specific constants because their molar masses differ.
For example, dry air’s specific gas constant is about 0.287 kJ/(kg·K), while water vapor’s is about 0.462 kJ/(kg·K). These are not competing values for one universal constant: they correspond to different molar masses. Always check whether a problem uses moles or mass before selecting a value.
How to Use the Constant in Gas Calculations
Choose the version that matches the amount of gas in your equation. The molar form is convenient when the amount is given in moles:
pV = nRT
The mass-specific form is convenient when the amount is given as mass:
pV = mRsT
- p is absolute pressure, not gauge pressure.
- V is volume.
- n is amount in moles; m is mass in kilograms.
- T is absolute temperature in kelvins.
- R or Rs must have units compatible with the other quantities.
With pressure in kPa, volume in m³, mass in kg, and Rs in kJ/(kg·K), the units are consistent because 1 kPa·m³ equals 1 kJ. If using the molar constant in kJ/(mol·K), use amount in mol and the same pressure-volume energy equivalence.
Unit Conversions and Common Mistakes
A frequent error is reporting the universal gas constant as 0.008314 kJ/(kg·K). That value still has a per-mole unit: it is 0.008314 kJ/(mol·K). To get kJ/(kg·K), divide by molar mass in kg/mol. For air, dividing by about 0.028965 kg/mol gives about 0.287 kJ/(kg·K).
Another common mix-up is using a molar mass in g/mol as though it were kg/mol. Convert by dividing by 1000: air’s approximate 28.965 g/mol is 0.028965 kg/mol. Alternatively, if using the universal constant in J/(mol·K), the resulting specific constant for air is about 287 J/(kg·K); dividing by 1000 gives about 0.287 kJ/(kg·K).
Temperature must be in kelvins for the ideal-gas equation. Convert Celsius using T(K) = t(°C) + 273.15. Keep pressure units and volume units consistent as well. A formula can produce a numerically plausible answer with mismatched units, so track dimensions through the calculation rather than relying on the number alone.
When the Ideal-Gas Approximation Applies
The gas constant appears in the ideal-gas model, which treats gas particles as having negligible volume and negligible intermolecular attractions. Many gases behave approximately ideally at modest pressures and temperatures well above conditions where they condense. The approximation becomes less reliable at high pressure, low temperature, or near a phase change; real-gas equations or property data may then be needed.
The value of R itself does not change when conditions change. What can change is how accurately the ideal-gas equation describes the gas. Likewise, the specific gas constant for a fixed chemical composition is fixed by its molar mass, while a mixture’s effective molar mass—and therefore its effective specific constant—depends on its composition.
Frequently Asked Questions
What is the universal gas constant in kJ/kg·K?
The universal constant is not ordinarily given in kJ/(kg·K); its unit is kJ/(mol·K), and its value is 0.008314462618. Divide by a particular gas’s molar mass in kg/mol to obtain its specific gas constant in kJ/(kg·K).
What is R for air in kJ/kg·K?
For dry air, the specific gas constant is approximately 0.287 kJ/(kg·K), based on an approximate molar mass of 0.028965 kg/mol. The value can differ slightly with air composition and the chosen molar-mass convention.
Is 8.314 the same as 0.008314?
Yes, when the units are converted consistently: 8.314 J/(mol·K) equals 0.008314 kJ/(mol·K), because 1 kJ = 1000 J. Neither is a mass-specific value by itself.
Why does the gas constant have different values in tables?
Tables may use different energy units, such as joules or kilojoules, or list the specific gas constant for a named gas rather than the universal molar constant. Compare both the numerical value and the units.
Can I use Celsius in pV = nRT?
No. Use absolute temperature in kelvins. Convert a Celsius temperature by adding 273.15 before substituting it into the ideal-gas equation.
Related
Formula used
in mw | Molar mass | kg/mol | 0.028965 | 0 out rs | Specific gas constant | kJ/(kg·K) | 0.008314462618 / mw | 6 out rj | Universal gas constant | kJ/(mol·K) | 0.008314462618 | 9
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s