molecalculator

Moles & Molar Mass

Molality Formula: Calculate Molal Concentration

Calculator No. 01-6801 · Updated · Formula and assumptions shown below

Molality 1.7112 mol/kg
Amount of solute
0.1711 mol
= Mass of solute ÷ Molar mass of solute
Mass of solute
10 g
Set in the form below
Molar mass of solute
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass of solute (g/mol), Mass of solvent (g)
You get
Molality (mol/kg), Amount of solute (mol)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This molality calculator finds the amount of solute per kilogram of solvent. Enter the solute mass, its molar mass, and the solvent mass; the result is molality in mol/kg, commonly written as molal (m).

Formula

Molality is the amount of solute, in moles, divided by the mass of solvent, in kilograms:

m = nsolute / kgsolvent = (msolute / Msolute) / (msolvent / 1000)

  • m is molality, in mol/kg.
  • nsolute is the amount of solute, in moles.
  • msolute is solute mass, in grams.
  • Msolute is solute molar mass, in g/mol.
  • msolvent is solvent mass, in grams. Dividing by 1000 converts grams to kilograms.

The calculator uses the solute’s molar mass as an input because that value depends on the compound. For example, the default 58.44 g/mol is the conventional molar mass of sodium chloride, calculated from the abridged standard atomic weights Na = 22.990 and Cl = 35.45 g/mol. The formula is also often written m = n / W, where W is the solvent mass in kilograms. The symbol m can mean other things in chemistry, so define it clearly when writing calculations.

Worked Example

Using the calculator’s default values—10 g solute, molar mass 58.44 g/mol, and 100 g solvent—first find moles of solute:

n = 10 g / (58.44 g/mol) = 0.1711157 mol

Convert the solvent mass to kilograms:

100 g / 1000 = 0.100 kg

Then divide the amount of solute by the solvent mass:

m = 0.1711157 mol / 0.100 kg = 1.7112 mol/kg

The calculator reports 1.7112 mol/kg (four decimal places). The amount-of-solute helper value is 0.1711 mol.

Assumptions

  • The entered solute mass and molar mass refer to the same chemical substance and formula unit.
  • The solvent mass is the mass of solvent alone, not the mass of the complete solution.
  • The entered masses and molar mass are accurate enough for the displayed rounding.
  • This is a composition calculation; it does not assume ideal behavior or complete dissociation.

What Molality Means and When to Use It

Molality describes how much solute is present relative to the mass of solvent. A solution with a molality of 1 mol/kg contains one mole of solute for every kilogram of solvent. The denominator is not the mass or volume of the finished solution.

Molality is useful when temperature changes matter. A liquid’s volume can expand or contract as temperature changes, whereas its mass does not change just because of thermal expansion. Consequently, molality is often used in physical chemistry and in calculations involving colligative properties, such as boiling-point elevation and freezing-point depression. Those applications may require additional assumptions about solution behavior and the number of dissolved particles; molality alone does not supply those corrections.

Molality is a concentration measure, but it is not interchangeable with molarity. Molarity is moles of solute per liter of solution, so it uses final solution volume. Molality uses kilograms of solvent. For example, adding a solute to 100 g of water does not mean the final solution volume is 100 mL: the solute contributes to the total solution and volumes need not add directly.

How to Use the Calculator

  1. Enter the mass of the solute in grams.
  2. Enter its molar mass in grams per mole. For a compound, use its chemical formula to determine the appropriate molar mass.
  3. Enter the mass of solvent in grams, excluding the solute.
  4. Read the molality in mol/kg. The second result is the calculated amount of solute in moles.

Keep units consistent with the formula. If your measurements are in kilograms, convert them to grams before entering them, or calculate directly using the equivalent form m = moles of solute / kilograms of solvent. Do not divide a mass in grams by a molar mass in g/mol and treat the result as molality; that first division gives moles only.

Common Mistakes and Limits

  • Using solution mass: The denominator is solvent mass. If you know only the total solution mass, subtract the solute mass when the solution contains just that solute and solvent.
  • Confusing grams and kilograms: A factor of 1000 separates the units. Forgetting the conversion makes the answer wrong by a factor of 1000.
  • Using the wrong molar mass: Check the chemical formula, including subscripts, and ensure the mass entered corresponds to the substance represented by the formula.
  • Rounding too early: Keep extra digits through the mole and mass conversions, then round the final result to match the precision of the measurements.
  • Assuming molality describes particle concentration directly: It counts formula units or molecules as represented in the formula. If a solute dissociates or associates, the number of particles in solution can differ, which matters for some property calculations.

Molality is undefined if the solvent mass is zero, and this calculator requires a positive solvent mass and a positive molar mass. It calculates the formal concentration from the values supplied; it does not verify sample purity, chemical identity, solubility, or whether all of the solute has dissolved. A reported value should not imply that a saturated mixture is a homogeneous solution.

Frequently Asked Questions

What is the formula for molality?
Molality is moles of solute divided by kilograms of solvent: m = nsolute / kgsolvent. If masses are in grams, calculate m = (solute grams / molar mass) / (solvent grams / 1000).

What unit is molality measured in?
The SI unit is mol/kg, or moles per kilogram. It is also commonly written with the symbol m for molal concentration. Do not confuse that lowercase m with the unit metre, which is written m in a different context.

Is molality the same as molarity?
No. Molality divides moles by kilograms of solvent; molarity divides moles by liters of final solution. They can have similar numerical values in some dilute water solutions, but they are different quantities and cannot be substituted without the needed density and composition information.

Does molality change with temperature?
For a fixed amount of solute and solvent, molality does not change merely because temperature changes: it is based on masses. The volume-based molarity can change as solution volume expands or contracts.

How do I find the solvent mass?
Use the mass of solvent alone. If a sample consists only of solvent and solute and you know the total solution mass, solvent mass equals total solution mass minus solute mass. If other components are present, account for them rather than assuming the difference is all solvent.

What does a molality of 1 m mean?
It means one mole of solute per kilogram of solvent. It does not mean one mole per liter of solution, and it does not specify the solution’s final volume.

Related

Formula used
in ms | Mass of solute | g | 10 | 0
in mm | Molar mass of solute | g/mol | 58.44 | 0.001
in sw | Mass of solvent | g | 100 | 0.001
out m | Molality | mol/kg | (ms / mm) / (sw / 1000) | 4
out n | Amount of solute | mol | ms / mm | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →