molecalculator

Moles & Molar Mass

5.68 Liters to Quarts Conversion

Calculator No. 01-7208 · Updated · Formula and assumptions shown below

Volume in US quarts 6.0020 qt
Volume in UK quarts
4.9977 qt (imp)
= Volume in liters × 0.879876993196351
Volume in liters
5.68 L
Set in the form below
You enter
Volume in liters (L)
You get
Volume in US quarts (qt), Volume in UK quarts (qt (imp))
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

5.68 liters equals exactly 6.0 US liquid quarts (6.00198 qt to be precise). To convert liters to quarts, multiply the liter value by 1.056688, the conversion factor for US liquid quarts.

Formula

The conversion uses a fixed relationship between the liter and the US quart:

Quarts (US) = Liters × 1.05668820943259

Where:

  • Liters (L) – the volume you start with, in the metric system.
  • US liquid quart (qt) – a US customary unit of volume equal to 32 US fluid ounces, ¼ US gallon, or 0.946352946 liters exactly.

The exact conversion factor comes from the definitions: 1 US liquid gallon = 3.785411784 liters (by international agreement since 1959), and 1 quart = ¼ gallon. Therefore 1 quart = 3.785411784 / 4 = 0.946352946 liters. Taking the reciprocal gives 1 liter = 1 / 0.946352946 = 1.05668820943259 quarts.

Worked Example

Convert 5.68 liters to US quarts.

Step 1: Write the conversion factor: 1 L = 1.05668820943259 qt.

Step 2: Multiply the volume in liters by the factor:

5.68 L × 1.05668820943259 qt/L = 6.00198863 qt

Step 3: Round to four decimal places: 6.0020 qt.

So 5.68 liters is approximately 6.00 US quarts – a very close whole-number result, which is why the calculator shows 6.0020.

Assumptions

  • The conversion uses the US liquid quart, the standard quart in the United States for cooking, beverages, and most everyday measurements.
  • The liter is defined as exactly 1 cubic decimeter (0.001 m³), and the US gallon is defined as exactly 231 cubic inches, which leads to the exact 0.946352946 L per quart.
  • The UK (imperial) quart is different: 1 imperial quart = 1.1365225 liters, so 5.68 L = 4.996 imperial quarts. The calculator shows this as a secondary output.

US Quart vs. UK Quart: Why It Matters

Many people do not realize that there are two different “quarts” in use. The US liquid quart is 0.946 liters, while the UK imperial quart is 1.137 liters – about 20% larger. A recipe or spec written in the UK will give different results if you use US measuring cups. For example, 5.68 L is 6.00 US quarts but only 4.996 imperial quarts. Always check which system your source uses. In scientific work, liters and milliliters are used almost exclusively, so this confusion rarely arises in the lab.

How to Convert Liters to Quarts in Everyday Situations

You might need this conversion for cooking, mixing chemicals, or understanding product volumes. Here are common examples:

  • Cooking: A soup recipe calls for 2 liters of broth. 2 L × 1.056688 = 2.113 qt, so you need about 2¼ quarts.
  • Automotive: Engine oil is often sold in liters in many countries. A 5-liter jug is 5.28 quarts, so a 6-quart oil change needs about 5.68 liters – exactly the value in this calculator.
  • Household: A 1.5-liter bottle of soda is 1.59 quarts, slightly more than a 1.5-quart carton.

For quick mental estimates, remember that 1 liter is just a bit more than 1 quart – about 6% more. So to go from liters to quarts, multiply by 1.06 for a rough figure, or by 1.0567 for precision.

Common Mistakes and How to Avoid Them

The most frequent error is using the wrong quart. If you are in the United States, use the US quart; if you are following a British recipe or using imperial units, use the imperial quart. Another common mistake is mixing up fluid ounces and ounces of weight – quarts measure volume, not weight. Also, be careful with decimal placement: 5.68 L is not the same as 56.8 L. Always double-check your input. Finally, when converting large volumes, remember that the conversion factor is not 1:1, so a 20-liter container is not 20 quarts – it is 21.13 quarts.

Why the Conversion Factor Is Not a Round Number

The liter is a metric unit based on the meter, while the quart is a customary unit based on the inch. The US gallon was defined as 231 cubic inches in the 18th century, and the liter was redefined in 1964 as exactly 1 cubic decimeter. Because these definitions come from different measurement systems, the conversion factor is an irrational-looking decimal. However, it is exact: 1 L = 1.05668820943259 US quarts, since 1 US quart = 0.946352946 L exactly. Knowing this helps you trust the calculator’s output even when the numbers look odd.

Practical Uses in the Kitchen and Lab

In the kitchen, you might need to convert a European recipe (which uses liters) to US measuring cups and quarts. In the lab, you might measure a solution in liters but need to report it in quarts for a collaborator in the US. The same conversion applies. For example, a 5.68 L batch of a reagent is exactly 6.00 quarts – a convenient round number. But remember that in chemistry, you almost always work in liters or milliliters, so converting to quarts is rare. If you do need it, use the exact factor above.

Frequently Asked Questions

How many quarts are in 5.68 liters?
Exactly 6.00198 US liquid quarts. Rounded to two decimals, that’s 6.00 quarts. In imperial quarts, it’s about 4.996.

Is 1 liter the same as 1 quart?
No, but they are close. 1 liter is 1.0567 US quarts, so a liter is about 6% larger than a quart. A quart is 0.946 liters.

How do I convert quarts to liters?
Divide the number of quarts by 1.056688, or multiply by 0.946353. For example, 6 quarts × 0.946353 = 5.678 liters, which is almost exactly 5.68 L.

What is the difference between a US quart and an imperial quart?
The US quart is 0.946 liters, while the imperial quart is 1.137 liters. The imperial quart is about 20% larger. Always know which system you are using.

Why do some recipes say “quart” but use metric measurements?
Many modern cookbooks list both systems. The US quart is used in the US, while the imperial quart is used in the UK and some Commonwealth countries. If the recipe is from the US, use the US quart.

Can I use this conversion for dry ingredients like flour?
Yes, but only for volume. A quart is a unit of volume, so 5.68 liters of flour is 6 quarts of flour by volume. However, weight will vary by ingredient – 6 quarts of flour weighs about 3.5 kg, while 6 quarts of water weighs about 5.68 kg.

Related

Formula used
in v | Volume in liters | L | 5.68 | 0
out q | Volume in US quarts | qt | v * 1.05668820943259 | 4
out qimp | Volume in UK quarts | qt (imp) | v * 0.879876993196351 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →