The molar mass of hydrated copper sulphate (copper(II) sulfate pentahydrate, CuSO4·5H2O) is 249.69 g/mol. This value is the sum of the anhydrous salt (159.61 g/mol) plus five water molecules (90.08 g/mol). Use this mass when preparing solutions from the blue crystalline hydrate, not the anhydrous white powder.
Formula
The molar mass (M) of a compound is the sum of the atomic weights of all atoms in its chemical formula, multiplied by their subscripts. For CuSO4·5H2O:
M(CuSO4·5H2O) = M(Cu) + M(S) + 4×M(O) + 5×[2×M(H) + M(O)]
- M(Cu) = 63.546 g/mol (copper)
- M(S) = 32.06 g/mol (sulfur)
- M(O) = 15.999 g/mol (oxygen in sulfate and in water)
- M(H) = 1.008 g/mol (hydrogen in water)
Plugging in: 63.546 + 32.06 + 4×15.999 + 5×(2×1.008 + 15.999) = 63.546 + 32.06 + 63.996 + 5×18.015 = 159.602 + 90.075 = 249.677 g/mol, which rounds to 249.68 g/mol (some sources use 249.69 due to rounding of atomic weights).
Worked Example
Using the calculator defaults: you want to prepare 250 mL of a 0.0468 mol/L (46.8 mM) solution from CuSO4·5H2O. How much solid do you need?
- Convert volume to liters: 250 mL = 0.250 L.
- Calculate moles required: moles = molarity × volume = 0.0468 mol/L × 0.250 L = 0.0117 mol.
- Convert moles to mass: mass = moles × molar mass = 0.0117 mol × 249.69 g/mol = 2.921 g.
The calculator gives 2.922 g (rounding of intermediate values). So you would weigh out about 2.92 g of the blue pentahydrate, dissolve in a little water, and make up to exactly 250 mL in a volumetric flask.
Assumptions
- The hydrate is pure CuSO4·5H2O with no efflorescence (loss of water).
- The solution is at room temperature; molarity is based on final volume, not solvent volume.
- Atomic weights are the IUPAC standard values; slight variations exist in different periodic tables.
Why the Hydrate Matters
Copper sulphate is commonly sold as the pentahydrate because it is the stable crystalline form at room temperature. The anhydrous form (CuSO4) is a white powder that absorbs water from the air, so it is rarely used for precise solution preparation unless freshly dried. If you accidentally use the wrong form, your concentration will be off by a factor of 249.69/159.61 ≈ 1.56 – a 56% error. Always check the label: blue crystals = pentahydrate; white powder = anhydrous.
How to Use the Molar Mass in Calculations
To prepare a solution of known molarity, you need the molar mass of the exact compound you are weighing. The general formula is:
mass (g) = molarity (mol/L) × volume (L) × molar mass (g/mol)
For example, to make 500 mL of 0.1 M CuSO4 from the pentahydrate:
- moles = 0.1 × 0.5 = 0.05 mol
- mass = 0.05 × 249.69 = 12.48 g
If you used anhydrous CuSO4, you would need only 0.05 × 159.61 = 7.98 g. The difference is significant in any quantitative work.
Common Mistakes and Misconceptions
- Using the wrong molar mass: Confusing the hydrate with the anhydrous salt is the most frequent error. Always verify the formula on the bottle.
- Not accounting for water of crystallization: The five water molecules are part of the crystal structure and contribute to the mass you weigh.
- Rounding too early: In multi-step calculations, keep at least 4 significant figures until the final answer. Rounding 249.69 to 250 g/mol is acceptable for rough work but introduces ~0.1% error.
- Volume vs. solvent: Molarity is defined per liter of final solution, not per liter of water added. Dissolve the solid in less water, then top up to the mark.
Related Calculations and Context
Hydrated salts are common in chemistry: copper sulphate pentahydrate, magnesium sulphate heptahydrate (Epsom salt, MgSO4·7H2O, molar mass 246.47 g/mol), and sodium carbonate decahydrate (Na2CO3·10H2O, 286.14 g/mol). The principle is the same: add the molar mass of the anhydrous compound to the molar mass of the water molecules. When heating a hydrate, the water is driven off; the mass loss can be used to determine the degree of hydration experimentally.
Safety and Handling
Copper sulphate is a skin and eye irritant and is harmful if swallowed. Wear gloves and safety goggles when handling the solid or concentrated solutions. Do not dispose of copper solutions down the drain; collect them for proper waste disposal. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the molar mass of anhydrous copper sulphate?
Anhydrous CuSO4 has a molar mass of 159.61 g/mol (63.546 + 32.06 + 4×15.999). It is the white powder obtained by heating the blue hydrate.
Why is copper sulphate blue?
The blue color comes from the copper(II) ion in an octahedral environment of water molecules. In the anhydrous form, the copper ion has a different coordination, so the color is white or pale gray.
How do I convert between mass of hydrate and mass of anhydrous salt?
Multiply the mass of hydrate by the ratio of molar masses: mass anhydrous = mass hydrate × (159.61 / 249.69). For example, 10 g of pentahydrate contains 10 × 0.639 = 6.39 g of anhydrous CuSO4.
Does the molar mass of the hydrate change if it has partially dried out?
Yes. If the crystals lose some water of crystallization (efflorescence), the effective molar mass decreases. To avoid this, store the hydrate in a sealed container and use fresh, well-formed crystals.
Can I use the same molar mass for all copper sulphate hydrates?
No. There are other hydrates, such as the trihydrate (CuSO4·3H2O, 213.65 g/mol) and the monohydrate (CuSO4·H2O, 177.62 g/mol). Always know which hydrate you have.
Related
Formula used
in m | Mass of CuSO4·5H2O | g | 2.922 | 0 in mm | Molar mass | g/mol | 249.69 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol
- Mass of Copper Sulfide: Formula & How to Find It1.0000 mol