The molar mass of anhydrous copper(II) sulfate (CuSO₄) is 159.61 g/mol. If you have the common hydrated form, copper(II) sulfate pentahydrate (CuSO₄·5H₂O), its molar mass is 249.69 g/mol. This value is the mass of one mole of the compound, and it is essential for converting between grams and moles in laboratory calculations.
Formula
The molar mass (M) of a compound is the sum of the atomic weights of all atoms in its formula, expressed in grams per mole (g/mol). For copper(II) sulfate, the formula is CuSO₄, which contains:
- 1 copper atom (Cu)
- 1 sulfur atom (S)
- 4 oxygen atoms (O)
Using standard atomic weights (IUPAC abridged values):
- Cu: 63.546 g/mol
- S: 32.06 g/mol
- O: 15.999 g/mol
So, M(CuSO₄) = 63.546 + 32.06 + 4 × 15.999 = 159.61 g/mol. For the pentahydrate, add 5 water molecules: 5 × (2 × 1.008 + 15.999) = 5 × 18.015 = 90.075 g/mol, giving 249.69 g/mol.
Worked Example
Let’s calculate the number of moles in 15.961 g of anhydrous CuSO₄, using the default values from the calculator.
- Write the formula: n = m / M
- Substitute: n = 15.961 g / 159.61 g/mol
- Calculate: n = 0.1000 mol (exactly, since 15.961 = 159.61 × 0.1)
The calculator returns 0.1000 mol. The second output shows that 15.961 g of anhydrous CuSO₄ is equivalent to 15.961 × (249.69/159.61) = 24.969 g of CuSO₄·5H₂O, which is useful when preparing a solution from the hydrated salt.
Assumptions
- Atomic weights are the IUPAC abridged standard values (2019).
- The compound is pure and free of impurities.
- For the hydrate, the water of crystallization is exactly 5 per formula unit.
Why the Molar Mass Matters
In the lab, you rarely measure moles directly—you weigh solids. The molar mass is the bridge between the mass on the balance and the amount of substance you need for a reaction or solution. For example, to prepare 250 mL of a 0.1 M CuSO₄ solution, you need 0.025 mol of CuSO₄. Multiplying by 159.61 g/mol gives 3.990 g of anhydrous salt, or 6.242 g of the pentahydrate. Without the correct molar mass, your concentrations will be off, potentially ruining an experiment.
Anhydrous vs. Hydrated: A Common Confusion
Copper(II) sulfate often appears as a blue crystalline solid that is actually the pentahydrate, CuSO₄·5H₂O. When heated, it loses water and becomes a white or grayish powder—the anhydrous form. The difference in molar mass is significant: 159.61 vs. 249.69 g/mol. If you mistakenly use the anhydrous value for the hydrate, you will under-weigh by about 36%, leading to a solution that is too dilute. Always check the label: if it says “copper(II) sulfate pentahydrate” or “CuSO₄·5H₂O,” use 249.69 g/mol. If it says “anhydrous,” use 159.61 g/mol. The calculator above lets you switch by entering the correct molar mass.
How to Use the Calculator
Enter the mass of your copper(II) sulfate sample (in grams) and its molar mass (choose 159.61 for anhydrous or 249.69 for pentahydrate). The calculator returns the amount in moles. The second output gives the mass of the pentahydrate that would contain the same number of moles of CuSO₄—useful when a protocol specifies the anhydrous salt but you only have the hydrate. The calculation is straightforward: n = m / M. The result is displayed with four decimal places, which is precise enough for most lab work.
Common Mistakes and Tips
- Using the wrong hydrate: Always confirm whether the chemical is anhydrous or hydrated. Even the monohydrate (CuSO₄·H₂O, M = 177.62 g/mol) exists, though it is less common.
- Rounding atomic weights too early: If you round Cu to 64 and S to 32, you get 160 g/mol, which is close but not exact. For precise work, use at least three decimal places.
- Unit mix-ups: Molar mass is in g/mol, not g. If you enter mass in kilograms, convert to grams first (1 kg = 1000 g).
- Forgetting the water in the hydrate: When calculating the molar mass of the pentahydrate, you must add 5 × 18.015 g/mol. A common error is to forget this and get 159.61, which is wrong for the blue crystals.
Safety and Handling
Copper(II) sulfate is harmful if swallowed and can cause eye and skin irritation. It is also toxic to aquatic life. When handling the powder, wear gloves and safety goggles, and avoid inhaling dust. In solution, it is less hazardous but still should not be ingested. Follow your lab method, the safety data sheet (SDS) and your supervisor. If you spill it, clean up promptly and dispose of waste according to local regulations.
Frequently Asked Questions
What is the molar mass of CuSO₄ in g/mol?
The molar mass of anhydrous copper(II) sulfate is 159.61 g/mol. This is the sum of the atomic weights of one copper atom (63.546), one sulfur atom (32.06), and four oxygen atoms (4 × 15.999).
What is the molar mass of CuSO₄·5H₂O?
Copper(II) sulfate pentahydrate has a molar mass of 249.69 g/mol. This includes the five water molecules of crystallization, each contributing 18.015 g/mol, added to the anhydrous mass of 159.61 g/mol.
Why is the molar mass of CuSO₄ sometimes given as 159.5 or 160?
Different sources may use slightly rounded atomic weights. For example, using Cu = 63.5 and S = 32 gives 159.5. The IUPAC standard value is 159.61, but for rough calculations, 160 is often acceptable. Always use the most precise value available for accurate work.
How do I convert grams of CuSO₄ to moles?
Divide the mass in grams by the molar mass (159.61 g/mol for anhydrous, 249.69 g/mol for pentahydrate). For example, 10 g of anhydrous CuSO₄ is 10 / 159.61 = 0.0627 mol.
Is the molar mass of CuSO₄ the same as its molecular weight?
Yes, for practical purposes, molar mass and molecular weight are used interchangeably. The molecular weight is the sum of atomic weights, and when expressed in g/mol, it is the molar mass. The term “molecular weight” is technically for covalent compounds, but it is commonly used for ionic compounds like CuSO₄ as well.
Related
Formula used
in m | Mass of CuSO₄ | g | 15.961 | 0 in mm | Molar mass of CuSO₄ | g/mol | 159.61 | 0 out n | Amount of substance | mol | m / mm | 4 out mh | Mass of CuSO₄·5H₂O equivalent | g | m * 249.69 / mm | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Mass of Copper Sulfide: Formula & How to Find It1.0000 mol