The relative molecular mass of anhydrous copper sulfate (CuSO₄) is 159.61 g/mol; for the common hydrated form, copper sulfate pentahydrate (CuSO₄·5H₂O), it is 249.69 g/mol. This value is the sum of the atomic weights of all atoms in the formula, expressed in atomic mass units (u) or grams per mole (g/mol).
Formula
The relative molecular mass (Mr) is calculated by adding the relative atomic masses (Ar) of each element in the chemical formula, multiplied by the number of atoms of that element:
Mr(CuSO₄) = Ar(Cu) + Ar(S) + 4 × Ar(O)
Using IUPAC standard atomic weights: Cu = 63.546, S = 32.06, O = 15.999.
Mr(CuSO₄) = 63.546 + 32.06 + 4 × 15.999 = 63.546 + 32.06 + 63.996 = 159.602, which rounds to 159.60 g/mol (often quoted as 159.61).
For the pentahydrate, add the mass of five water molecules (each H₂O = 18.015 g/mol):
Mr(CuSO₄·5H₂O) = 159.602 + 5 × 18.015 = 159.602 + 90.075 = 249.677, which rounds to 249.68 g/mol (commonly listed as 249.69).
Worked Example
Using the calculator defaults: you dissolve 2.922 g of anhydrous CuSO₄ in enough water to make 250 mL of solution. What is the molarity?
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of CuSO₄: moles = mass / molar mass = 2.922 g / 159.61 g/mol = 0.01831 mol
- Calculate molarity: M = moles / volume (L) = 0.01831 mol / 0.250 L = 0.07324 mol/L
The calculator shows 0.0732 mol/L (rounded to 4 decimal places). In millimolar, that is 73.24 mM.
Anhydrous vs. Hydrated: Why the Difference Matters
Copper sulfate is commonly sold in two forms: the white or grayish anhydrous powder (CuSO₄) and the bright blue crystalline pentahydrate (CuSO₄·5H₂O). The hydrated form contains water molecules trapped in the crystal lattice. When you weigh out a sample for a solution, you must know which form you have. Using the wrong molar mass introduces a 36% error in concentration—if you treat pentahydrate as anhydrous, you add 90 g/mol of extra mass that is not copper sulfate. Always check the label or the appearance: blue crystals are almost always the pentahydrate.
How to Use the Calculator
Enter the mass of your copper sulfate sample (in grams), its molar mass (use 159.61 for anhydrous or 249.69 for pentahydrate), and the final solution volume in milliliters. The calculator returns the molar concentration in mol/L and in mmol/L. This is useful for preparing solutions for electroplating, analytical chemistry (e.g., Biuret test), or as a fungicide in agriculture—though always follow the specific protocol for your application.
Common Mistakes and Misconceptions
- Confusing hydrate with anhydrous: Always confirm the formula on the reagent bottle. If it says CuSO₄·5H₂O, use 249.69, not 159.61.
- Forgetting to convert mL to L: Molarity is moles per liter. Dividing by milliliters directly gives a result off by a factor of 1000.
- Rounding too early: Use at least 4 significant figures in intermediate steps. Rounding the molar mass to 160 g/mol changes the final concentration by about 0.2%—acceptable for rough work but not for precise lab measurements.
- Assuming the hydrate is exactly 5 waters: Some commercial samples may have partially dehydrated. If you need high accuracy, determine the water content by drying a sample and weighing before and after.
Assumptions
- The compound is pure and has the exact formula given (anhydrous or pentahydrate).
- Atomic weights are taken from the IUPAC standard (Cu 63.546, S 32.06, O 15.999, H 1.008).
- The solution is at room temperature (density changes are negligible for dilute solutions).
- Final volume is the total solution volume, not the volume of solvent added.
Frequently Asked Questions
Why is the molar mass of copper sulfate sometimes given as 250 g/mol?
That is the rounded value for the pentahydrate (249.69 g/mol). Many textbooks and industrial recipes round to 250 for simplicity. For precise lab work, use 249.68 or 249.69.
What is the relative molecular mass of copper sulfate without water?
Anhydrous CuSO₄ has a relative molecular mass of 159.61 g/mol. This is the sum of Cu (63.55), S (32.06), and four O (4 × 16.00 = 64.00), giving 159.61.
How do I convert between the mass of CuSO₄·5H₂O and the mass of anhydrous CuSO₄?
Multiply the mass of the hydrate by the ratio of molar masses: (159.61 / 249.69) = 0.639. For example, 10 g of CuSO₄·5H₂O contains 6.39 g of anhydrous CuSO₄. To go the other way, divide by 0.639 (or multiply by 1.562).
Does the relative molecular mass of copper sulfate change with temperature?
No, the molecular mass is a constant property of the substance. Temperature affects the density of the solution, so the molarity (mol/L) changes slightly with temperature because volume changes, but the mass of a given sample does not change.
Why is copper sulfate blue?
The blue color comes from the copper(II) ion (Cu²⁺) in an aqueous environment. In the pentahydrate crystal, water molecules surround the Cu²⁺ ion, producing the characteristic blue color. Anhydrous CuSO₄ is white or gray because the copper ion is not coordinated by water.
Is copper sulfate safe to handle?
Copper sulfate is an irritant to skin, eyes, and respiratory tract. It is toxic if ingested in large amounts. Always wear gloves and safety goggles, and wash hands after handling. Follow your lab method, the safety data sheet (SDS) and your supervisor for proper disposal.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 159.61 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol
- Mass of Copper Sulfide: Formula & How to Find It1.0000 mol