This list covers the 50 most common conversions from grams (g) to liters (L) for everyday substances, lab reagents, and cooking ingredients. It’s for students, cooks, and lab workers who need a quick reference for converting mass to volume using density. Each entry gives the substance, its density, and the volume that 50 g occupies.
Water and Aqueous Solutions
- Water at 4°C – 50 g = 0.050 L. Density is exactly 1.000 g/mL at this temperature, so the conversion is a straight 1:1.
- Seawater (35 ppt salinity) – 50 g = 0.0485 L. Density ≈ 1.03 g/mL, so saltwater is slightly denser than fresh.
- Milk (whole) – 50 g = 0.0485 L. Density ≈ 1.03 g/mL, similar to seawater due to fats and proteins.
- Human blood plasma – 50 g = 0.0485 L. Density ≈ 1.03 g/mL, which is why medical calculations often use this value.
- Ethanol 96% (aqueous) – 50 g = 0.0625 L. Density ≈ 0.80 g/mL, common in lab disinfectants.
- Honey (liquid) – 50 g = 0.0357 L. Density ≈ 1.40 g/mL, much denser than water.
- Sugar syrup (65% w/w) – 50 g = 0.0370 L. Density ≈ 1.35 g/mL, typical for simple syrups.
- Acetic acid (glacial) – 50 g = 0.0476 L. Density ≈ 1.05 g/mL, used in buffer prep.
- Hydrochloric acid 37% (concentrated) – 50 g = 0.0420 L. Density ≈ 1.19 g/mL, a common lab stock.
- Sulfuric acid 98% – 50 g = 0.0272 L. Density ≈ 1.84 g/mL, very dense, handle with care.
Oils and Fats
- Olive oil – 50 g = 0.0543 L. Density ≈ 0.92 g/mL, typical for cooking oils.
- Sunflower oil – 50 g = 0.0543 L. Density ≈ 0.92 g/mL, nearly identical to olive oil.
- Butter (melted) – 50 g = 0.0543 L. Density ≈ 0.92 g/mL, but solid butter is less dense.
- Coconut oil (liquid) – 50 g = 0.0543 L. Density ≈ 0.92 g/mL, solid at room temp but melts at 24°C.
- Mineral oil – 50 g = 0.0581 L. Density ≈ 0.86 g/mL, used in cosmetics and laxatives.
- Glycerol – 50 g = 0.0397 L. Density ≈ 1.26 g/mL, a viscous triol used in pharmaceuticals.
- Castor oil – 50 g = 0.0526 L. Density ≈ 0.95 g/mL, denser than most oils.
- Motor oil (SAE 30) – 50 g = 0.0562 L. Density ≈ 0.89 g/mL, varies with temperature.
Common Kitchen Ingredients
- All-purpose flour – 50 g = 0.0962 L. Density ≈ 0.52 g/mL, but this varies with sifting.
- Granulated sugar – 50 g = 0.0625 L. Density ≈ 0.80 g/mL, typical for dry sugar.
- Brown sugar (packed) – 50 g = 0.0581 L. Density ≈ 0.86 g/mL, packing increases density.
- Salt (table) – 50 g = 0.0435 L. Density ≈ 1.15 g/mL, but grain size changes it.
- Baking soda – 50 g = 0.0278 L. Density ≈ 1.80 g/mL, quite dense powder.
- Cornstarch – 50 g = 0.0962 L. Density ≈ 0.52 g/mL, light and fluffy.
- Rice (uncooked) – 50 g = 0.0625 L. Density ≈ 0.80 g/mL, varies by variety.
- Rolled oats – 50 g = 0.125 L. Density ≈ 0.40 g/mL, very light.
- Butter (solid) – 50 g = 0.0543 L. Density ≈ 0.92 g/mL, but air pockets in sticks reduce it.
- Egg (whole, liquid) – 50 g = 0.0485 L. Density ≈ 1.03 g/mL, about one large egg.
Metals and Solids
- Aluminum – 50 g = 0.0185 L. Density ≈ 2.70 g/cm³, a light metal.
- Iron – 50 g = 0.00637 L. Density ≈ 7.87 g/cm³, common in steel.
- Copper – 50 g = 0.00559 L. Density ≈ 8.96 g/cm³, used in wiring.
- Gold – 50 g = 0.00259 L. Density ≈ 19.32 g/cm³, very dense.
- Lead – 50 g = 0.00441 L. Density ≈ 11.34 g/cm³, used for shielding.
- Titanium – 50 g = 0.0111 L. Density ≈ 4.51 g/cm³, strong and light.
- Stainless steel (304) – 50 g = 0.00633 L. Density ≈ 7.90 g/cm³, typical alloy.
- Glass (borosilicate) – 50 g = 0.0200 L. Density ≈ 2.50 g/cm³, lab glassware.
- Polyethylene (HDPE) – 50 g = 0.0538 L. Density ≈ 0.93 g/cm³, floats on water.
- Ice (0°C) – 50 g = 0.0546 L. Density ≈ 0.917 g/cm³, less dense than liquid water.
Gases (at STP)
- Oxygen (O₂) – 50 g = 35.0 L. Density ≈ 1.429 g/L at STP (0°C, 1 atm).
- Nitrogen (N₂) – 50 g = 39.9 L. Density ≈ 1.251 g/L at STP.
- Carbon dioxide (CO₂) – 50 g = 25.4 L. Density ≈ 1.977 g/L at STP.
- Hydrogen (H₂) – 50 g = 560 L. Density ≈ 0.0899 g/L at STP, the lightest gas.
- Helium – 50 g = 280 L. Density ≈ 0.1785 g/L at STP.
- Methane (CH₄) – 50 g = 69.8 L. Density ≈ 0.717 g/L at STP.
- Ammonia (NH₃) – 50 g = 65.7 L. Density ≈ 0.771 g/L at STP.
Lab Reagents and Solvents
- Acetone – 50 g = 0.0633 L. Density ≈ 0.790 g/mL at 20°C.
- Ethanol (absolute) – 50 g = 0.0633 L. Density ≈ 0.789 g/mL at 20°C.
- Methanol – 50 g = 0.0633 L. Density ≈ 0.792 g/mL at 20°C.
- Toluene – 50 g = 0.0576 L. Density ≈ 0.867 g/mL at 20°C.
- Chloroform – 50 g = 0.0336 L. Density ≈ 1.489 g/mL at 20°C, denser than water.
How to Use This List
For any substance not listed, use the formula: volume (L) = mass (g) ÷ density (g/mL) ÷ 1000. Look up the density at your working temperature (most values are at 20°C or 25°C). For mixtures, use the actual measured density. For gases, remember that STP is 0°C and 1 atm; at room temperature (25°C), volumes are about 8% higher. Always double-check units: density in g/mL gives volume in mL, then divide by 1000 for liters.
Frequently Asked Questions
Q: Why is the conversion different for every substance? A: Because density (mass per volume) varies; 50 g of lead takes up far less space than 50 g of flour.
Q: Can I use this for any temperature? A: No, density changes with temperature. For liquids, it decreases as temperature rises; for gases, the change is significant.
Q: What if I don’t know the density? A: Look it up in a reference table (like the CRC Handbook) or measure it by dividing mass by volume.
Q: How do I convert from liters back to grams? A: Multiply the volume in liters by the density in g/mL and then by 1000 to get grams.
Q: Are these values exact? A: No, densities are approximate and depend on purity, temperature, and pressure. Use them as estimates.
Q: Why are gas volumes so large? A: Gases have very low densities (around 1 g/L), so 50 g occupies many liters, unlike liquids or solids.
Final Thoughts
Converting grams to liters is straightforward once you know the density. This list gives you a starting point for common materials, but always verify the density for your specific sample and conditions. For lab work, follow your method and the safety data sheet (SDS). Bookmark this page for quick reference, and remember: density is the key to any mass-volume conversion.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol