molecalculator

Moles & Molar Mass

Half-Life Calculator: 20-Minute Nucleus Decay

Calculator No. 01-6956 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator works out how much of a radioactive nucleus remains after a given time, using its half-life. You enter the initial amount, the elapsed time, and the half-life (20 minutes in the example question), and it returns the remaining fraction and the decay constant. For a nucleus with a 20-minute half-life, after 20 minutes exactly half remains, after 40 minutes a quarter remains, and so on.

Formula

The decay of a radioactive nucleus follows first-order kinetics. The amount remaining after time t is given by:

N(t) = N₀ × (1/2)t / t₁/₂

where:

  • N(t) = amount remaining after time t (in mol, grams, or number of atoms – any unit that stays consistent)
  • N₀ = initial amount (same unit as N(t))
  • t = elapsed time (in minutes, hours, seconds – must match the half-life unit)
  • t₁/₂ = half-life (same time unit as t)

The decay constant k (also called λ) relates to the half-life by:

k = ln(2) / t₁/₂

For a half-life of 20 minutes, k = 0.693147 / 20 = 0.034657 per minute. The decay constant tells you the probability per unit time that a nucleus will decay.

Worked Example

Suppose you start with 1.0000 mol of a radioactive isotope with a half-life of 20 minutes, and you wait 20 minutes. Using the default values from the calculator:

  1. Identify the inputs: N₀ = 1.0000 mol, t = 20 min, t₁/₂ = 20 min.
  2. Compute the exponent: t / t₁/₂ = 20 / 20 = 1.0000.
  3. Raise 0.5 to that power: 0.51 = 0.5000.
  4. Multiply by initial amount: N = 1.0000 × 0.5000 = 0.5000 mol.

So after 20 minutes, 0.5000 mol remains – exactly half. The fraction remaining is 0.5000, and the decay constant is ln(2)/20 = 0.034657 per minute.

Assumptions

  • The decay follows first-order kinetics, which is true for all radioactive decay.
  • The half-life is constant and does not change with temperature, pressure, or chemical state.
  • The sample is pure and not being replenished by a parent isotope.
  • Time units are consistent between elapsed time and half-life.

How to Read the Result

The calculator gives the remaining amount as a fraction of the initial. For a 20-minute half-life:

  • After 20 min, 50% remains.
  • After 40 min, 25% remains.
  • After 60 min, 12.5% remains.
  • After 100 min (5 half-lives), 3.125% remains.

In practice, the amount never reaches zero mathematically, but after about 10 half-lives (200 minutes for a 20-min half-life), less than 0.1% remains, which is often treated as negligible. The decay constant k is useful for calculating the activity (decays per second) if you know the number of atoms: Activity = k × N.

Common Mistakes and Misconceptions

A frequent error is mixing time units – for example, entering elapsed time in minutes but half-life in seconds. Always convert to the same unit. Another mistake is thinking that after two half-lives the substance is completely gone; in reality, 25% remains. Some people confuse half-life with “decay constant” – they are related but not the same. Also, the half-life is independent of the amount of substance; whether you have 1 gram or 1 kilogram, the half-life is the same.

Another misconception: “after 20 minutes, the nucleus is gone” – no, half of the nuclei decay, the other half remain. For a single nucleus, you cannot predict when it will decay; half-life is a statistical property of a large population.

Why Half-Life Matters

Half-life is a key parameter in nuclear physics, radiometric dating, nuclear medicine, and waste management. For example, carbon-14 has a half-life of 5,730 years, used to date archaeological samples. Iodine-131 has a half-life of about 8 days, used in medical treatments. The 20-minute half-life in your question is typical of short-lived isotopes used in research or medical imaging (like some technetium isomers). Knowing the half-life lets you calculate how long you need to wait for a sample to decay to a safe level, or how much activity remains after a procedure.

Alternatives: Decay Constant and Activity

Instead of using the half-life, you can use the decay constant k in the exponential decay formula: N(t) = N₀ × e−kt. Both forms are equivalent; the half-life form is often more intuitive. Activity (A) is the rate of decay, measured in becquerels (Bq) or curies (Ci). If you know the number of atoms N, activity = k × N. For a 20-minute half-life, k = 0.034657 min⁻¹, which is about 5.78 × 10⁻⁴ s⁻¹. If you have 1 mole of atoms (6.022 × 10²³), the activity is 5.78 × 10⁻⁴ × 6.022 × 10²³ ≈ 3.48 × 10²⁰ Bq, an extremely high activity.

Frequently Asked Questions

What does “half-life of 20 minutes” mean exactly?

It means that every 20 minutes, the number of radioactive nuclei in a sample decreases by half. If you start with 1000 nuclei, after 20 minutes you have 500, after 40 minutes 250, and so on. This is a statistical average; individual nuclei decay randomly.

How do I calculate the amount remaining after 1 hour for a 20-minute half-life?

One hour is 60 minutes, which is 3 half-lives (60/20 = 3). The remaining fraction is (1/2)³ = 1/8 = 0.125. So 12.5% of the original remains. If you started with 2 grams, you’d have 0.25 grams left.

Can the half-life change with temperature or pressure?

For most radioactive decay, no. The half-life is a nuclear property and is essentially constant under all normal conditions. There are rare exceptions for electron capture decay, where the chemical environment can slightly affect the half-life, but the effect is tiny and not relevant for typical calculations.

What is the difference between half-life and decay constant?

The half-life (t₁/₂) is the time for half the nuclei to decay. The decay constant (k) is the probability per unit time that a nucleus decays. They are related by k = ln(2) / t₁/₂. For a 20-minute half-life, k ≈ 0.0347 per minute.

Is there a formula to find the time when only 10% remains?

Yes, use the decay formula: N/N₀ = 0.5^(t/t₁/₂). Set N/N₀ = 0.10, take the natural log of both sides: ln(0.10) = (t/t₁/₂) × ln(0.5). Solve for t = t₁/₂ × ln(0.10)/ln(0.5). For a 20-minute half-life, t = 20 × (−2.3026)/(−0.6931) ≈ 66.44 minutes.

Why can’t I predict when a single nucleus will decay?

Radioactive decay is a quantum process – it is inherently random. The half-life gives the probability for a large population. For one nucleus, you can only say that after one half-life, there is a 50% chance it has decayed, but it might decay in the next second or in a much longer time.

Related

Formula used
in n0 | Initial amount | mol | 1 | 0
in t | Elapsed time | min | 20 | 0
in th | Half-life | min | 20 | 0.001
out N | Remaining amount | mol | n0 * 0.5^(t / th) | 4
out frac | Fraction remaining | - | 0.5^(t / th) | 4
out k | Decay constant | per min | ln(2) / th | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →