molecalculator

Moles & Molar Mass

Proton + Neutron: Mass, Charge & Binding Energy

Calculator No. 01-6887 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A proton plus a neutron form a deuteron, the nucleus of deuterium (hydrogen-2). The combined mass is less than the sum of the individual masses, with the difference released as binding energy. This article explains the masses, charges, and the energy involved in this fundamental nuclear pairing.

Formula

The mass defect (Δm) is the difference between the sum of the masses of the individual nucleons and the mass of the bound nucleus:

Δm = mp + mn − md

where:

  • mp = mass of a proton (atomic mass units, u)
  • mn = mass of a neutron (u)
  • md = mass of the deuteron (u)

The binding energy (E) is then given by Einstein’s mass–energy equivalence:

E = Δm × 931.49410242 MeV/u

The conversion factor 931.49410242 MeV/u is exact (from c² = 931.49410242 MeV/u). The binding energy per nucleon is E divided by the number of nucleons (2 for a deuteron).

Worked Example

Using the default values:

mp = 1.007276466621 u, mn = 1.00866491595 u, md = 2.013553212545 u

Step 1: Sum the proton and neutron masses:

1.007276466621 + 1.00866491595 = 2.015941382571 u

Step 2: Subtract the deuteron mass:

2.015941382571 − 2.013553212545 = 0.002388170026 u

Step 3: Convert to energy:

0.002388170026 × 931.49410242 = 2.224566 MeV

Step 4: Per nucleon: 2.224566 / 2 = 1.112283 MeV/nucleon

So the binding energy of the deuteron is about 2.2246 MeV, and the binding energy per nucleon is about 1.1123 MeV/nucleon.

Assumptions

  • Atomic masses are used for the proton, neutron, and deuteron (not nuclear masses). The electron masses cancel in the mass defect because the deuteron is neutral.
  • The deuteron is in its ground state (the only bound state of the proton–neutron system).
  • The conversion factor 931.49410242 MeV/u is exact.

Why the Mass Defect Matters

The mass defect is not a mathematical trick; it is a real, measurable difference. If you could weigh a free proton and a free neutron separately, then weigh a deuteron, the deuteron would be lighter by about 0.002388 u (which is roughly 0.1% of the total mass). That missing mass has been converted into the energy that holds the nucleons together—the binding energy.

This energy is released when a proton and neutron fuse to form a deuteron. In stars, this fusion is the first step of the proton–proton chain, which powers main-sequence stars like the Sun. The energy released per fusion event is tiny (about 2.22 MeV), but the sheer number of events sustains a star’s luminosity.

The binding energy per nucleon is a measure of nuclear stability. For deuterium, it is unusually low (1.11 MeV/nucleon) compared to heavier nuclei like iron-56 (8.79 MeV/nucleon). This low value reflects the weak binding of the deuteron—it is only just bound, with no excited states. A small perturbation can break it apart.

Common Misconceptions

One common error is thinking that the proton and neutron “stick” by sharing a particle. In reality, the strong nuclear force, mediated by gluons, binds quarks inside each nucleon and also acts between nucleons. The residual strong force (like van der Waals forces between molecules) is what holds the proton and neutron together.

Another misconception is that the mass defect means mass is “destroyed.” Mass is converted to energy, but the total mass–energy of the system is conserved. The deuteron has less rest mass, but the binding energy (as field energy) accounts for the difference.

Also, the proton and neutron are not the only combination that forms a bound nucleus. Two protons alone do not bind (the diproton is unbound), and two neutrons alone do not bind. The deuteron is the only bound two-nucleon system, which is why it is so special.

How to Use the Calculator

Enter the masses of the proton, neutron, and deuteron in atomic mass units (u). The calculator finds the mass defect and converts it to binding energy in MeV and per nucleon. You can also use it to compute the binding energy of other light nuclei by entering their masses (e.g., helium-3, tritium) and adjusting the nucleon count in the per-nucleon formula.

For example, to find the binding energy of helium-4 (alpha particle), you would enter mp = 1.007276466621, mn = 1.00866491595, and mα = 4.001506179127 u. The mass defect would be (2×1.007276466621 + 2×1.00866491595) − 4.001506179127 = 0.0303765 u, giving a binding energy of about 28.3 MeV.

Remember that the atomic masses include electrons. For a neutral atom, the electron masses cancel when you subtract the sum of the proton and neutron masses from the atomic mass of the isotope, because the number of electrons is the same on both sides.

Practical Applications

The proton–neutron binding energy is not just a theoretical curiosity. It has practical implications:

  • Nuclear fusion research: Understanding the deuteron’s binding helps model fusion reactions in experimental reactors like ITER.
  • Astrophysics: The rate of the proton–proton chain depends on the probability of forming a deuteron, which is extremely low because the reaction is mediated by the weak force (converting a proton to a neutron).
  • Medical isotopes: Deuterium is used in NMR spectroscopy and as a tracer in metabolic studies.
  • Neutron sources: Deuterium–deuterium and deuterium–tritium reactions are used in neutron generators for imaging and materials analysis.

The mass defect also explains why nuclear fission and fusion release energy. When heavy nuclei split or light nuclei fuse, the products have a higher binding energy per nucleon, meaning the excess mass is released as energy.

Frequently Asked Questions

What is the charge of a proton plus a neutron?

A proton has a charge of +1 elementary charge (approximately 1.602 × 10−19 C), and a neutron has zero charge. So the combined system has a net charge of +1. The deuteron, therefore, has a charge of +1, which is why it behaves as a positively charged ion in electric fields.

Is a proton plus a neutron stable?

Yes, the deuteron is stable; it does not decay. It is the only bound state of a proton and neutron. However, it is weakly bound, so it can be broken apart by a photon with energy greater than 2.22 MeV (photodisintegration).

What is the mass of a proton plus a neutron?

The sum of the individual masses is approximately 2.015941 u. But the actual mass of the bound deuteron is about 2.013553 u. The difference (0.002388 u) is the mass defect, which corresponds to the binding energy of 2.22 MeV.

Why is the deuteron binding energy so low?

The deuteron is a loosely bound system because the strong nuclear force between the proton and neutron is just barely attractive enough to overcome the repulsive kinetic energy. The nuclear force has a short range, and the deuteron’s wavefunction is spread out, leading to a shallow potential well. This is why the deuteron has no excited states.

Can a proton and neutron form a nucleus without a neutron?

No, a proton alone is a hydrogen nucleus (protium). Adding a neutron makes deuterium. The proton–neutron pair is the simplest multi-nucleon nucleus. You cannot have a nucleus with just protons because the electrostatic repulsion would overcome the strong force for more than one proton.

How does the mass defect relate to nuclear energy?

In nuclear reactions, the total mass of the products is less than the total mass of the reactants. The mass difference is converted to kinetic energy of the products or released as gamma radiation. The binding energy per nucleon curve shows that iron-56 is the most stable nucleus, and reactions that move toward iron release energy.

Related

Formula used
in m_p | Proton mass | u | 1.007276466621 | 1.007 | 1.008
in m_n | Neutron mass | u | 1.00866491595 | 1.008 | 1.009
in m_d | Deuteron mass | u | 2.013553212545 | 2.013 | 2.014
out dm | Mass defect | u | m_p + m_n - m_d | 6
out e | Binding energy | MeV | dm * 931.49410242 | 4
out em | Binding energy per nucleon | MeV/nucleon | e / 2 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →