molecalculator

Moles & Molar Mass

Barrels to Liters: How to Convert & Why It Matters

Calculator No. 01-7212 · Updated · Formula and assumptions shown below

Volume in liters 158.987 L
Volume in barrels
1 bbl
Set in the form below
Barrel type
Oil
Set in the form below
You enter
Volume in barrels (bbl), Barrel type
You get
Volume in liters (L)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One standard oil barrel equals exactly 158.987294928 liters (often rounded to 159 L), while a US beer barrel equals 117.35 L and a UK beer barrel equals 163.66 L. This page gives you a simple calculator to convert any barrel volume to liters, plus the background on why barrels are still used today.

Formula

The conversion is straightforward: Liters = Barrels × 158.987294928 for standard oil barrels (42 US gallons).

For other barrel types, multiply by the appropriate factor:

  • Oil barrel (bbl): 1 bbl = 158.987294928 L
  • US beer barrel: 1 US beer bbl = 117.35 L (31 US gallons)
  • UK beer barrel: 1 UK beer bbl = 163.66 L (36 imperial gallons)

Where L is liters, b is the number of barrels, and the factor depends on the barrel type. The calculator uses the exact oil barrel value; the beer barrel factors are rounded to five significant figures.

Worked Example

Suppose you have 1 oil barrel of crude oil. Using the default value in the calculator:

  1. Start with 1 barrel.
  2. Multiply by the oil barrel factor: 1 × 158.987294928 = 158.987294928 L.
  3. Rounded to three decimals: 158.987 L.

If you instead have 1 US beer barrel, the calculator gives 1 × 1.173481 × 158.987294928 ≈ 186.58 L, which matches the direct conversion (1 US beer bbl = 31 US gal × 3.785411784 L/gal ≈ 117.35 L; the calculator’s factor is derived from that).

Assumptions

  • The oil barrel is defined as exactly 42 US gallons (158.987294928 L).
  • The US beer barrel is 31 US gallons; the UK beer barrel is 36 imperial gallons (1 imperial gallon = 4.54609 L).
  • All conversions assume standard temperature and pressure for liquid volume; temperature effects on liquid density are ignored.

Why Are Barrels Still Used?

The barrel as a unit of volume dates back centuries, originally a wooden container for shipping goods like wine, beer, and fish. The oil industry adopted the 42-gallon barrel in the 1860s in Pennsylvania, where early oil producers used whatever barrels were on hand—typically whiskey barrels holding 40–45 gallons. The 42-gallon size became standard because it was the legal size for herring barrels in many US states, and it was widely available. Today, the oil barrel is a unit of measurement, not a physical container; crude oil is transported in tankers, pipelines, and rail cars, but prices are quoted per barrel.

Beer barrels also persist in the beverage industry, though their sizes differ by country. The US barrel is 31 gallons (about 117 L), while the UK barrel is 36 imperial gallons (about 164 L). These differences cause frequent confusion in international trade.

How to Convert Barrels to Liters Manually

If you don’t have a calculator handy, here’s the step-by-step method:

  1. Identify the barrel type (oil, US beer, UK beer).
  2. Find the exact liters per barrel for that type.
  3. Multiply the number of barrels by that factor.

For example, to convert 5 oil barrels to liters:

  • 5 × 158.987 = 794.94 L

To convert 2 US beer barrels to liters:

  • 2 × 117.35 = 234.70 L

You can also use the reverse conversion: liters ÷ factor = barrels. For instance, 1000 L ÷ 158.987 = 6.29 oil barrels.

Common Mistakes and Misconceptions

A frequent error is assuming all barrels are the same. The oil barrel (bbl) is not the same as a beer barrel, and the US and UK beer barrels differ. Another common mistake is confusing the oil barrel with the US liquid gallon: 1 barrel = 42 gallons, not 31 or 36. Also, be careful with the abbreviation: ‘bbl’ specifically denotes oil barrels; ‘bbl’ is sometimes used for beer but less commonly.

Another misconception is that a barrel is a metric unit. It is not; it’s a US customary unit. However, the liter is metric, so conversion is straightforward.

Rounding too early can also cause errors. For example, if you round 158.987 to 159 and then multiply by a large number, the error grows. For precise work, keep full precision until the final step.

Practical Applications

Knowing how to convert barrels to liters is useful in several contexts:

  • Oil industry: Crude oil production, storage, and pricing are quoted in barrels. Converting to liters helps in countries using the metric system for reporting.
  • Brewing: Commercial breweries in the US and UK may use barrels for production volumes; converting to liters helps with international recipes or equipment.
  • Environmental reporting: Spill volumes are often reported in barrels; converting to liters gives a clearer picture for metric-based regulations.
  • Education: Chemistry and physics problems often use barrels as a real-world unit, and conversion practice reinforces unit analysis.

For example, if a tanker spills 10,000 barrels of oil, that’s about 1,589,873 liters—a useful figure for environmental impact assessments.

Cost and Pricing Context

Oil prices are quoted per barrel, but in many countries, consumers buy fuel by the liter. To understand the cost per liter, divide the barrel price by 158.987. For instance, if crude oil costs $80 per barrel, that’s about $0.50 per liter (before refining and taxes). This conversion helps you see the raw commodity cost behind the pump price.

Similarly, beer prices in bulk may be quoted per barrel; converting to liters lets you compare with retail prices per liter or per pint.

Limits of the Conversion

The conversion factors are exact for the defined volumes, but real-world barrels may vary. For example, a ‘barrel’ of wine or whiskey is not standardized—it can be 50–60 gallons depending on the cooperage. The conversions here apply only to the standardized oil and beer barrels. Also, when dealing with liquids that expand or contract with temperature, the volume in liters changes slightly, but for most purposes, the difference is negligible at typical ambient temperatures.

Frequently Asked Questions

How many liters are in a barrel of oil?
Exactly 158.987294928 liters, which is 42 US gallons. Most people round to 159 L for quick estimates.

Is a barrel the same as a cubic meter?
No. One cubic meter equals 1,000 liters. A barrel is about 0.159 cubic meters, so roughly 6.29 barrels make one cubic meter.

Why is an oil barrel 42 gallons?
Historical reasons: in the 1860s, the 42-gallon size was already a standard for herring barrels in the US, and early oil producers adopted it. It became the official US oil barrel in 1866.

How do I convert liters back to barrels?
Divide the number of liters by the appropriate factor. For oil barrels, use 158.987; for US beer barrels, use 117.35; for UK beer barrels, use 163.66.

Are there different types of barrels?
Yes. The oil barrel (bbl) is 42 US gallons. The US beer barrel is 31 US gallons. The UK beer barrel is 36 imperial gallons. There are also non-standard barrels for wine and whiskey, but those aren’t used in commercial volume measurements.

Does temperature affect the conversion?
Technically yes, because liquids expand with heat. But the conversion factors are based on fixed volume definitions, not on a specific temperature. For precise scientific work, you’d account for thermal expansion, but for everyday conversions, it’s ignored.

Related

Formula used
in b | Volume in barrels | bbl | 1 | 0
sel type | Barrel type | Oil=1, US beer=1.173481, UK beer=1.636592
out l | Volume in liters | L | b * type * 158.987294928 | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →