molecalculator

Moles & Molar Mass

Magnesium Sulfate Formula and Molar Mass Calculator

Calculator No. 01-6629 · Updated · Formula and assumptions shown below

Amount of magnesium sulfate 1.0000 mol
Formula units
6.022 × 1023 formula units
Result, rounded to 4 decimal places
Sample mass
120.37 g
Set in the form below
Molar mass
120.37 g/mol
Set in the form below
You enter
Sample mass (g), Molar mass (g/mol)
You get
Amount of magnesium sulfate (mol), Formula units (formula units)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The formula of magnesium sulfate is MgSO₄; its anhydrous molar mass is 120.37 g/mol. This calculator converts a sample mass into moles and formula units, using the molar mass of anhydrous magnesium sulfate as its default. Enter the mass in grams to see both results.

Formula

The amount of substance is the sample mass divided by molar mass:

n = m / M

  • n is amount of magnesium sulfate, in moles (mol).
  • m is the sample mass, in grams (g).
  • M is molar mass, in grams per mole (g/mol).

The number of formula units is N = n × NA, where N is the count of formula units and the exact Avogadro constant, NA = 6.02214076 × 1023 mol−1. A formula unit is the simplest whole-number composition of this ionic compound, not a discrete molecule floating in the solid.

For anhydrous MgSO₄, the molar mass from standard atomic weights is Mg 24.305 + S 32.06 + 4 × O 15.999 = 120.361 g/mol, conventionally rounded to 120.37 g/mol. The calculator uses 120.37 g/mol as its default; a material with a different hydration state requires a different molar mass.

Worked Example

Using the calculator’s default sample mass of 120.37 g and molar mass of 120.37 g/mol:

  1. Amount: n = m / M = 120.37 g / (120.37 g/mol) = 1.0000 mol.
  2. Formula units: N = n × NA = 1.0000 mol × 6.02214076 × 1023 mol−1 = 6.022 × 1023 formula units (rounded to four significant figures).

Assumptions

  • The input is pure, anhydrous magnesium sulfate, with no water of crystallization or other impurities.
  • The mass and molar mass refer to the same chemical form.
  • The formula-unit count is a stoichiometric calculation, not a claim that ionic solids contain separate MgSO₄ molecules.

What MgSO₄ Means

Magnesium sulfate is an ionic compound made of magnesium ions, Mg²⁺, and sulfate ions, SO₄²⁻. One of each balances the charges: +2 and −2 give an electrically neutral composition, represented by MgSO₄. The sulfate ion contains one sulfur atom bonded to four oxygen atoms and has an overall charge of 2−.

In a solid crystal, these ions form an extended lattice. The chemical formula describes the simplest ratio of ions—one magnesium ion for each sulfate ion—rather than a small, independent molecule. This distinction explains why “formula units” is the more precise term when counting portions of an ionic solid.

Anhydrous Salt and Hydrated Forms

Magnesium sulfate is also sold and encountered as hydrates: crystals that incorporate water into their structure. A familiar example is magnesium sulfate heptahydrate, MgSO₄·7H₂O. The dot means seven water molecules are associated with each MgSO₄ unit in the crystal; it does not change the 1:1 magnesium-to-sulfate ratio.

Heptahydrate has a molar mass of about 246.47 g/mol, substantially higher than anhydrous MgSO₄ because the seven water molecules add mass. Thus, the same weighed mass of the hydrate contains fewer moles of magnesium sulfate than the same mass of anhydrous salt. For a hydrate calculation, enter the hydrate’s molar mass and interpret the result as moles of hydrate formula units; each mole still contains one mole of magnesium sulfate units.

Check the label or chemical specification for the exact form. Do not apply 120.37 g/mol to a hydrated sample: doing so overestimates its amount. Other hydration states have their own formulas and molar masses.

When to Use This Calculation

Mass-to-mole conversion is useful in stoichiometry, composition calculations, and non-clinical laboratory planning. For example, anhydrous MgSO₄ mass can be converted to moles before comparing it with a balanced reaction equation. To prepare a solution of a specified concentration, the amount in moles may be useful, but a separate concentration calculation must also account for the solution’s final volume.

This calculator does not calculate molarity because no solution volume is entered. Molarity is moles of solute per litre of final solution; it is not simply moles divided by the volume of solvent initially added. Follow your lab method, the safety data sheet (SDS) and your supervisor for bench work.

Common Errors and Limits

  • Mixing up the solid form: anhydrous MgSO₄ and MgSO₄·7H₂O have different molar masses. Verify which form the stated mass represents.
  • Confusing formula units with molecules: MgSO₄ is an ionic formula unit, not a molecular substance in the same sense as a covalent molecule.
  • Using inconsistent units: this calculator expects mass in grams and molar mass in g/mol. Convert milligrams to grams by dividing by 1,000 before entering them.
  • Rounding too early: use the molar mass appropriate to the sample and retain enough digits during intermediate calculations. The displayed precision does not imply that a physical weighing is exact to that many digits.

The result assumes the sample is pure and its chemical form is known. Contamination, moisture, or an uncertain hydration state can make the calculated amount differ from the actual amount. The calculation itself does not determine purity or identify an unknown solid.

Frequently Asked Questions

What is the chemical formula for magnesium sulfate?
It is MgSO₄: one magnesium ion for each sulfate ion.

What is the molar mass of MgSO₄?
Anhydrous magnesium sulfate has a molar mass of about 120.37 g/mol. Hydrated forms, such as MgSO₄·7H₂O, have higher molar masses.

Is Epsom salt the same formula as anhydrous magnesium sulfate?
Common Epsom salt is magnesium sulfate heptahydrate, MgSO₄·7H₂O, rather than anhydrous MgSO₄. The magnesium sulfate component is the same, but the crystal contains water.

Why is the formula MgSO₄ and not Mg₂(SO₄)₂?
Both ratios reduce to the same 1:1 proportion, but chemical formulas use the simplest whole-number ratio of ions. MgSO₄ is therefore the conventional formula.

How many ions are represented by one formula unit?
One MgSO₄ formula unit represents one Mg²⁺ ion and one SO₄²⁻ ion. The sulfate ion itself contains one sulfur atom and four oxygen atoms.

Related

Formula used
in m | Sample mass | g | 120.37 | 0
in mm | Molar mass | g/mol | 120.37 | 0
out n | Amount of magnesium sulfate | mol | m / mm | 4
out p | Formula units | formula units | n * 6.02214076e23 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →