Half-life is the time it takes for half of a given amount of a radioactive substance to decay into a different element or isotope. You enter the initial amount, the half-life, and the elapsed time, and the calculator returns how much of the original substance remains. This page explains the physics behind the term, the exponential decay equation, and how half-life is used in medicine, geology, and nuclear waste management.
Formula
The amount of a radioactive substance remaining after a time t is given by:
N(t) = N₀ × (1/2)t / t₁/₂
- N(t) – amount remaining after time t (same unit as N₀, e.g., grams, moles, or number of atoms)
- N₀ – initial amount of the substance
- t – elapsed time (any unit, as long as it matches the half-life unit)
- t₁/₂ – half-life (same time unit as t)
The exponent t / t₁/₂ is the number of half-lives that have passed. Because the base is 1/2, each half-life reduces the amount by half, regardless of the starting quantity.
Worked Example
Using the default values: initial amount = 10 g, half-life = 5730 years (the half-life of carbon-14), elapsed time = 11460 years.
First, find the number of half-lives: 11460 / 5730 = 2.0.
Then apply the formula: N = 10 × (1/2)2 = 10 × 0.25 = 2.5 g.
The calculator shows 2.5 g remaining, which is 25% of the original. This matches the rule of thumb: after two half-lives, one quarter remains.
Assumptions
- Decay is a random, spontaneous process that follows first-order kinetics – the probability of decay per unit time is constant.
- No new atoms of the isotope are being produced (e.g., no nuclear reactions or production in a reactor).
- The half-life is independent of temperature, pressure, chemical state, or physical form – true for all known radioactive isotopes.
- The sample is large enough that statistical fluctuations are negligible (the law of large numbers applies).
What Is Half-Life and Why Does It Matter?
Half-life is a fundamental property of every radioactive isotope. It ranges from fractions of a second (e.g., polonium-214 has a half-life of 164 microseconds) to billions of years (e.g., uranium-238 has a half-life of 4.47 billion years). The concept was introduced by Ernest Rutherford in 1907, who noticed that the decay of radioactive elements follows an exponential pattern.
Why is it useful? Because it allows scientists to predict how long a radioactive material will remain hazardous, to date ancient objects, and to calculate doses in medical treatments. It also explains why some nuclear waste must be stored for tens of thousands of years – the half-life determines the persistence of radioactivity.
How Half-Life Works in Practice
Radioactive decay is a quantum-mechanical process: you cannot predict when a single atom will decay, but for a large population, the decay rate is highly predictable. The half-life is the time at which the probability of any given atom having decayed is 50%.
After one half-life: 50% remains. After two: 25%. After three: 12.5%. After ten half-lives, less than 0.1% remains – often considered “effectively gone” for many purposes, though not truly zero.
This exponential behavior means the amount never reaches zero mathematically, but in practice, after about 10–20 half-lives, the remaining radioactivity is below typical detection limits.
Common Uses of Half-Life
- Radiocarbon dating: Carbon-14 (half-life 5,730 years) is used to date organic materials up to about 50,000 years old. By measuring the ratio of carbon-14 to carbon-12, scientists estimate when an organism died.
- Geological dating: Uranium-238 (half-life 4.47 billion years) decays to lead-206, allowing dating of rocks and the Earth itself (about 4.54 billion years old).
- Nuclear medicine: Isotopes like technetium-99m (half-life 6 hours) are used for imaging because they decay quickly, minimizing patient radiation exposure.
- Radiotherapy: Cobalt-60 (half-life 5.27 years) is used to treat cancer, delivering a controlled dose of gamma radiation.
- Nuclear waste management: Knowing half-lives helps plan storage times. For example, cesium-137 (half-life 30 years) and strontium-90 (half-life 29 years) remain hazardous for centuries.
How to Choose the Right Half-Life for Calculations
When solving problems, always ensure the time unit matches the half-life unit. If the half-life is given in years but the elapsed time is in days, convert one to the other first. For example, if a sample has a half-life of 12 hours and you wait 3 days, convert 3 days to 72 hours, then divide by 12 to get 6 half-lives.
Also, decide whether you need the remaining amount, the fraction, or the time elapsed. The formula can be rearranged to solve for any variable:
- Remaining amount: N = N₀ × (1/2)t/t₁/₂
- Time elapsed: t = t₁/₂ × log₂(N₀/N)
- Half-life: t₁/₂ = t / log₂(N₀/N)
Common Mistakes and Misconceptions
Mistake 1: Adding half-lives instead of multiplying. If a sample has a half-life of 10 years, after 20 years it is not zero – it is one quarter. Each half-life halves the current amount, not the original.
Mistake 2: Confusing half-life with “full life.” The term “half-life” does not mean the time for complete decay. It is always the time for half to decay.
Mistake 3: Using the wrong units. A common error is mixing seconds and hours. Always convert to a single unit.
Misconception: Half-life changes with temperature or pressure. For radioactive decay, it does not. Unlike chemical reactions, nuclear decay is unaffected by external conditions.
Misconception: After two half-lives, the sample is gone. Actually, 25% remains. After ten half-lives, about 0.1% remains – still measurable in some cases.
Limitations of the Half-Life Model
The simple exponential model assumes a constant decay probability and no external influences. For most practical purposes, this is true. However, there are rare exceptions:
- Electron capture: In some isotopes, the decay rate can be slightly affected by the chemical environment, because the capture of an orbital electron depends on electron density near the nucleus. The effect is tiny (less than 1%) but measurable.
- Branched decay: Some isotopes decay by multiple pathways (e.g., potassium-40 decays to both argon-40 and calcium-40), but the overall half-life still describes the total decay.
- Statistical fluctuations: For very small samples (a few atoms), the exact time for half to decay is not exactly the half-life – it varies randomly. The half-life is a statistical average.
In medicine, the biological half-life of a substance (how long the body eliminates half of it) is different from its physical half-life. Both are considered when planning treatments, but this page focuses on the physical decay half-life.
Frequently Asked Questions
What is the half-life of carbon-14? Carbon-14 has a half-life of 5,730 years (± 40 years). This means a 10 g sample of carbon-14 would decay to 5 g in 5,730 years, and to 2.5 g in 11,460 years.
How do you calculate half-life from decay rate? If you know the decay constant (λ), the half-life is t₁/₂ = ln(2) / λ. The decay constant is related to the activity (decays per second) and the number of atoms: A = λN.
Is half-life the same for all isotopes of an element? No. Different isotopes of the same element have different half-lives. For example, carbon-14 has a half-life of 5,730 years, while carbon-11 has a half-life of about 20 minutes.
Can half-life be used for non-radioactive substances? Yes, the concept applies to any exponential decay process. For example, the biological half-life of a drug in the body, the half-life of a chemical reaction (first-order), and the half-life of a capacitor discharging all follow the same mathematics.
What does a half-life of 0 mean? A half-life of zero would imply instantaneous decay, which is not physically possible. In the calculator, the minimum half-life is set to 1×10⁻¹⁰ years (about 3 milliseconds) to avoid division by zero.
How many half-lives until a substance is safe? There is no universal answer. For nuclear waste, “safe” often means the activity has dropped to a level that poses negligible risk, which may require 10–20 half-lives. For example, cesium-137 (30-year half-life) would need about 300–600 years to reach that point.
Related
Formula used
in a | Initial amount | g | 10 | 0 in t12 | Half-life | years | 5730 | 0.0000000001 in t | Elapsed time | years | 11460 | 0 out rem | Remaining amount | g | a * 0.5^(t / t12) | 4 out frac | Fraction remaining | - | 0.5^(t / t12) | 4 out pct | Percent remaining | % | 0.5^(t / t12) * 100 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline