molecalculator

Moles & Molar Mass

Half Life Decay Curve: How to Read and Use It

Calculator No. 01-7043 · Updated · Formula and assumptions shown below

Remaining amount 6.2500 g
Fraction remaining
0.0625
= 0.5^(Elapsed time ÷ Half-life)
Amount decayed
93.7500 g
= Initial amount − Initial amount × 0.5^(Elapsed time ÷ Half-life)
Initial amount
100 g
Set in the form below
You enter
Initial amount (g), Half-life (h), Elapsed time (h)
You get
Remaining amount (g), Fraction remaining, Amount decayed (g)
Rounding
4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A half-life decay curve is a graph that shows how the amount of a radioactive (or otherwise decaying) substance decreases over time, dropping by half after each half-life period. You enter the initial quantity and the half-life, and the curve tells you the remaining amount at any future time. This page explains the shape of the curve, the underlying exponential equation, and how to use it for real calculations.

Formula

The half-life decay curve follows the exponential decay equation:

N(t) = N₀ × (1/2)^(t / t½)

  • N(t) – amount remaining after time t (grams, moles, or any unit)
  • N₀ – initial amount at t = 0 (same unit as N(t))
  • t – elapsed time (hours, days, years – must match the half-life unit)
  • t½ – half-life (same time unit as t)

The exponent t / t½ counts how many half-lives have passed. After one half-life, the factor is 0.5; after two, 0.25; after three, 0.125, and so on. The curve is a smooth downward-sloping exponential, not a straight line, because the decay rate is proportional to the amount present.

Worked Example

Using the calculator defaults: initial amount N₀ = 100 g, half-life t½ = 6 hours, elapsed time t = 24 hours.

  1. Compute the number of half-lives: t / t½ = 24 / 6 = 4 half-lives.
  2. Apply the decay factor: (1/2)^4 = 0.0625.
  3. Multiply by initial amount: 100 × 0.0625 = 6.25 g.

The calculator gives 6.25 g remaining, which matches. The fraction remaining is 0.0625 (6.25%), and the amount decayed is 100 − 6.25 = 93.75 g.

Assumptions

  • The decay follows first-order kinetics – the rate is proportional to the amount present.
  • The half-life is constant over time (true for radioactive isotopes, not for some biological processes).
  • No new substance is added or removed during the decay period.
  • The substance is pure and homogeneous.

How to Read the Curve

The half-life decay curve is a plot with time on the x-axis and the remaining amount on the y-axis. It starts at N₀ (the y-intercept) and falls steeply at first, then levels off asymptotically toward zero – it never quite reaches zero mathematically. Key points to identify:

  • At t = 0, the curve is at 100% of the initial amount.
  • At t = t½, the curve is at 50%.
  • At t = 2t½, it is at 25%.
  • At t = 3t½, it is at 12.5%.

Each half-life interval reduces the amount by half, so the curve’s slope becomes less negative over time. This is why the curve is called “exponential decay” – the ratio of successive y-values is constant (0.5).

Common Mistakes and Misconceptions

One frequent error is mixing time units: if the half-life is in hours but the elapsed time is in days, the exponent is wrong. Always convert to the same unit before dividing. Another mistake is assuming the curve is linear – after two half-lives, 25% remains, not 0%. A third misconception is that the substance is “gone” after a certain number of half-lives; in reality, it only approaches zero. For practical purposes, after about 10 half-lives, less than 0.1% remains, which is often below detection limits.

Rounding too early can also cause errors. For example, if you round 0.5^(24/6) to 0.06 instead of 0.0625, you get 6 g instead of 6.25 g – a 4% error that compounds if used in further calculations.

Applications and Alternatives

The half-life decay curve is used in:

  • Radiometric dating – carbon-14 (half-life 5,730 years) and uranium-238 (4.5 billion years) help date archaeological and geological samples.
  • Nuclear medicine – technetium-99m (half-life 6 hours) is used in imaging because it decays quickly, limiting radiation exposure.
  • Pharmacokinetics – drug clearance often follows a similar exponential pattern, though it may involve multiple half-lives.
  • Environmental science – estimating how long pollutants like cesium-137 (half-life 30 years) remain in soil.

An alternative to the half-life curve is the decay constant λ, where λ = ln(2) / t½. The decay equation can be written as N(t) = N₀ × e^(−λt). Both forms give the same curve, but the half-life form is more intuitive for non-specialists.

Limits of the Half-Life Model

The half-life curve assumes a single, constant half-life. This holds for radioactive isotopes, but not for all decay processes. For example, biological elimination of a drug may involve multiple compartments with different half-lives, producing a curve that is not a single exponential. Also, if the substance is being produced while it decays (e.g., in a nuclear reactor), the net change is not a simple half-life curve. In those cases, you need a more complex model that includes production and decay rates.

For very short half-lives (milliseconds) or very long ones (billions of years), the curve is still valid but impractical to measure directly. Scientists use statistical methods to infer half-lives from decay counts.

Safety and Accuracy Notes

When working with radioactive materials in a lab, always follow your institution’s safety procedures, the material’s safety data sheet (SDS), and your supervisor’s instructions. The half-life curve tells you the amount of material, but it does not tell you the radiation dose – that depends on the type of radiation, energy, and distance. For any experiment, use calibrated instruments and verify the half-life from a reliable source, as published values can vary slightly with measurement conditions.

For non-radioactive uses (e.g., chemical reaction kinetics), confirm that the process is truly first-order before applying the half-life model. If the reaction order is different, the decay curve will not be a simple exponential.

Frequently Asked Questions

What does a half-life decay curve look like?

It is a smooth, downward-curving line that starts at the initial amount and falls steeply, then gradually flattens as it approaches zero. It never touches the x-axis because exponential decay is asymptotic.

How do I find the half-life from a decay curve?

Pick any point on the curve where you know the amount. Find the time when the amount is exactly half of that value. The difference between those two times is the half-life. You can do this at any point on the curve; the result should be the same.

Why is the half-life constant, not changing over time?

For radioactive decay, the probability of a nucleus decaying per unit time is constant, regardless of how many nuclei remain. This is a statistical property of quantum mechanics, so the half-life is a fixed property of the isotope.

Can a half-life decay curve be used for non-radioactive substances?

Yes, any process that follows first-order kinetics – where the rate is proportional to the amount – can be described by a half-life. Examples include some chemical reactions and drug elimination, but you must verify the order first.

What is the difference between half-life and decay constant?

The decay constant λ is the probability of decay per unit time, and it relates to the half-life by λ = ln(2) / t½. The half-life is easier to grasp, but the decay constant appears directly in the exponential equation N(t) = N₀e^(−λt).

After how many half-lives is the substance considered gone?

There is no strict cutoff, but after 10 half-lives, the remaining amount is 0.1% of the original (0.5^10 ≈ 0.00098). For most practical purposes, this is negligible, but it is never mathematically zero.

Related

Formula used
in n0 | Initial amount | g | 100 | 0
in t12 | Half-life | h | 6 | 0.000001
in t | Elapsed time | h | 24 | 0
out nt | Remaining amount | g | n0 * 0.5^(t / t12) | 4
out frac | Fraction remaining | - | 0.5^(t / t12) | 4
out decayed | Amount decayed | g | n0 - n0 * 0.5^(t / t12) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →