Yes, you can play Half-Life for free through a few legal avenues, most notably the free-to-play multiplayer spinoff Half-Life 2: Deathmatch and the community-created mod Half-Life: Echoes, though the original single-player campaign itself is not officially free. This article covers every legitimate way to experience the Half-Life universe without paying, what you actually get, and the limitations you should know about.
Formula
Molarity (c) is the amount of solute in moles divided by the volume of solution in liters. The formula used here is:
c = m / (mm × V)
- m = mass of solute in grams (g)
- mm = molar mass of the solute in grams per mole (g/mol)
- V = final solution volume in liters (L) – note that you enter mL, so the calculator divides by 1000
- c = molarity in moles per liter (mol/L), also written as M
The second output (cmm) simply multiplies the molarity by 1000 to give millimolar (mM), which is convenient for dilute solutions.
Worked Example
Using the default values from the calculator: dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution.
- Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
- Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
- Divide moles by volume: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L
- Convert to millimolar: 0.2000 mol/L × 1000 = 200.0 mM
The calculator shows 0.2000 mol/L (or 0.2 M) and 200.0 mM, matching the manual calculation.
Assumptions
- The solute is pure and fully dissolved; no volume change upon mixing.
- The final volume is the total solution volume, not the solvent volume added.
- Temperature is assumed to be room temperature (25 °C) where density effects are negligible for typical dilute solutions.
- The molar mass is the formula weight of the anhydrous compound; hydrates require adjusting the molar mass.
When to Use This Calculation
You need molarity whenever you prepare a solution with a specific concentration for a reaction, buffer, or stock solution. For example, making 500 mL of 0.1 M HCl from concentrated HCl, or preparing a 2 M NaOH solution for a titration. This calculation is the foundation of lab work – it tells you how much solid to weigh or how much stock to dilute.
How to Read the Result
The first output is the molarity in mol/L. A value of 0.2000 M means there are 0.2000 moles of solute per liter of solution. The millimolar output is useful for biological work where concentrations are often in the mM range (e.g., 5 mM ATP solution). Remember that molarity is temperature-dependent because volume changes with temperature, though the effect is small for most aqueous solutions.
Common Mistakes and Pitfalls
- Using solvent volume instead of final volume: If you add 250 mL of water to 2.922 g of NaCl, the final volume will be slightly more than 250 mL. Always prepare in a volumetric flask and fill to the mark.
- Forgetting to convert mL to L: A classic error – 250 mL is 0.250 L, not 250 L. This leads to a 1000-fold error.
- Rounding molar mass too early: Using 58.5 instead of 58.44 changes the result by about 0.1%. For precise work, use the exact molar mass from the periodic table.
- Confusing molarity with molality: Molality is moles per kilogram of solvent, not per liter of solution. They are similar for dilute aqueous solutions but differ at higher concentrations.
Limitations of the Formula
This formula assumes ideal behavior – that the solute dissolves completely and that the volume of the solution is the sum of the solute and solvent volumes. In reality, some solutes (like salts) cause volume contraction or expansion. For very concentrated solutions, the molarity may differ from what you expect. Also, the formula does not account for temperature effects on volume; for high-precision work, you should prepare solutions at the temperature at which they will be used.
Frequently Asked Questions
How do I make a solution of a specific molarity?
Weigh the calculated mass of solute, transfer it to a volumetric flask, add about half the final volume of solvent, swirl to dissolve, then fill to the mark with solvent and mix thoroughly. Always use a volumetric flask for accurate final volume.
What is the difference between molarity and molality?
Molarity (M) is moles of solute per liter of solution. Molality (m) is moles of solute per kilogram of solvent. Molarity changes with temperature because volume changes, while molality does not. For dilute aqueous solutions, they are numerically close.
Can I use this calculator for any solute?
Yes, as long as you know the molar mass of the solute. For hydrated salts (e.g., CuSO₄·5H₂O), include the water molecules in the molar mass calculation.
Why is the molar mass of NaCl 58.44?
It is the sum of the atomic weights of sodium (22.99) and chlorine (35.45). These are standard IUPAC values. Always use the most accurate atomic weights available for your work.
What if I want to prepare a solution from a concentrated stock?
Use the dilution formula M₁V₁ = M₂V₂, where M₁ and V₁ are the stock concentration and volume, and M₂ and V₂ are the desired concentration and volume. This calculator does not handle dilutions directly, but you can use it to find the concentration of the diluted solution.