molecalculator

Moles & Molar Mass

Half Life Free? Cost & How to Play

Calculator No. 01-7059 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Half-Life is not free to download legally. Valve’s original 1998 shooter is a paid game, but it is very inexpensive, frequently goes on sale for about $1, and is included in several bundles. You can play a free fan-made remake (Black Mesa) only if you already own a copy of Half-Life 2, and the standalone free mods like Half-Life: Echoes require the base game.

Formula

The molarity (c) is the amount of solute in moles divided by the volume of solution in liters:

c = m / (MM × V)

  • c = molarity in mol/L (also written M)
  • m = mass of solute in grams (g)
  • MM = molar mass of the solute in g/mol
  • V = final volume of solution in liters (L), so if you measure in mL, divide by 1000 first

This is the standard definition of molar concentration. It assumes the solute is completely dissolved and that the final volume (not the solvent volume) is used.

Worked Example

Using the calculator defaults: dissolve 2.922 g of NaCl (MM = 58.44 g/mol) in enough water to make 250 mL of solution.

Step 1: Convert volume to liters: 250 mL / 1000 = 0.250 L

Step 2: Calculate moles of NaCl: 2.922 g / 58.44 g/mol = 0.05000 mol

Step 3: Divide moles by volume: 0.05000 mol / 0.250 L = 0.2000 mol/L

The calculator shows c = 0.2000 M, and in millimolar: 0.2000 × 1000 = 200.0 mM.

Assumptions

  • The solute is pure and fully dissolves.
  • The volume used is the final solution volume, not the volume of solvent added.
  • Temperature and pressure do not affect molarity (they affect other concentration units like molality).
  • For ionic compounds, the formula unit is used (e.g., NaCl = 58.44 g/mol), not individual ions.

When to Use Molarity

Molarity is the most common concentration unit in chemistry labs. Use it whenever you need to calculate how much solid to weigh out to make a solution of a specific concentration, or when you need to dilute a stock solution. It is also used in stoichiometry to relate volumes of solutions to moles of reactants. For example, if you need 0.500 L of 0.100 M KCl for a reaction, you calculate the mass: 0.100 mol/L × 0.500 L × 74.55 g/mol = 3.7275 g.

How to Read the Result

The result tells you how many moles of solute are in each liter of solution. A 0.200 M NaCl solution contains 0.200 mol of NaCl per liter. If you pour out 100 mL of that solution, you get 0.200 × 0.100 = 0.0200 mol of NaCl. The millimolar output is simply the molarity multiplied by 1000, which is convenient for biological work where concentrations are often in the millimolar range.

Common Mistakes

  • Using solvent volume instead of final volume. If you add 250 mL of water to 2.922 g of NaCl, the final volume is slightly more than 250 mL. Always dissolve the solute in less water, then bring the total volume up to the mark.
  • Forgetting to convert mL to L. Dividing by 1000 is essential.
  • Using the wrong molar mass. For hydrated salts, use the mass of the hydrate (including water) if you weigh the hydrate. For example, CuSO₄·5H₂O has MM = 249.69 g/mol, not 159.61 g/mol.
  • Rounding too early. Keep at least 4 significant figures until the final step.

Limits of the Formula

Molarity changes with temperature because volume expands or contracts. For precise work, use molality (moles per kg of solvent) or state the temperature. Also, the formula assumes ideal behavior; for very concentrated solutions, the actual concentration may differ slightly. Always prepare solutions at the temperature you will use them.

Frequently Asked Questions

How do I calculate molarity from mass and volume? Divide the mass of solute (in grams) by its molar mass to get moles, then divide by the volume in liters. The calculator does this in one step.

What is the difference between molarity and molality? Molarity is moles per liter of solution; molality is moles per kilogram of solvent. Molarity depends on volume, which changes with temperature, while molality does not.

Can I use this calculator for any solute? Yes, as long as you know the molar mass. For compounds with known formulas, calculate the molar mass from atomic weights. For mixtures or polymers, you need an average molar mass.

Why does my measured pH differ from the calculated concentration? pH depends on the activity of hydrogen ions, which is affected by ionic strength and temperature. The molarity of an acid is not the same as its pH. Use a pH meter to verify.

How do I make a dilution from a stock solution? Use the dilution formula C₁V₁ = C₂V₂. For example, to make 100 mL of 0.05 M from 1 M stock: V₁ = (0.05 × 100) / 1 = 5 mL, add water to 100 mL.

What if my solute is a liquid? You can still use mass if you weigh it, but for liquids it is often easier to use volume and density. Convert volume to mass using density, then proceed as above.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →