molecalculator

Moles & Molar Mass

Calculate Log Base e on a Calculator

Calculator No. 01-6722 · Updated · Formula and assumptions shown below

Natural logarithm ln(x) 1.000000
Positive number x
2.718281828
Set in the form below
You enter
Positive number x
You get
Natural logarithm ln(x)
Rounding
6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Calculating log base e means finding the natural logarithm, written ln(x): the power you raise the constant e (about 2.71828) to in order to get x. Enter a positive number and use your calculator’s ln function to get the result; this page’s calculator also lets you check the value directly.

Formula

The natural logarithm of x is the exponent y such that e raised to y equals x:

y = ln(x) = loge(x), equivalently ey = x.

  • x is the positive number entered; it has no required unit. If x represents a measured quantity, use a dimensionless ratio, such as a quantity divided by a reference quantity with the same units.
  • e is Euler’s number, approximately 2.718281828459045. It is a mathematical constant, not a value you need to type for the calculator function.
  • y is the natural logarithm, a dimensionless exponent.

The formula is defined for real-number calculations only when x > 0. A calculator’s ln key computes this directly. The log key commonly means base 10, so it is not interchangeable with ln unless you deliberately convert bases.

Worked Example

The calculator’s default input is x = 2.718281828. Applying the formula:

y = ln(2.718281828) ≈ 0.9999999998.

Rounded to the calculator’s six decimal places, the result is 1.000000. This is expected because e1 = e, and the default input is e rounded to nine decimal places.

Assumptions

  • The input is a positive real number, not zero or a negative number.
  • The result is the natural logarithm, with base e.
  • For a physical or chemical quantity, the logarithm’s input should be a dimensionless ratio. Follow your lab method, the safety data sheet (SDS) and your supervisor.

What You’ll Need

  • A scientific calculator, calculator app, or this page’s calculator.
  • The positive number whose natural logarithm you want to calculate.
  • If using a handheld calculator, identify whether it has an ln key and check how it enters functions: some models use function-then-number, while others use number-then-function.

Step-by-Step

  1. Check that your input is positive. Natural logarithms of positive real numbers are defined. Zero and negative values do not produce a real-number result. If your value comes from a measurement, make sure it is the intended quantity or ratio before proceeding.
  2. Enter the number. Type the full value you want to use, including its decimal places. For scientific notation, use the calculator’s EXP or EE key if available; for example, enter 3.2 × 10−4 as 3.2 EXP −4. Do not use the multiplication key in place of the exponent-entry key.
  3. Find the natural-log function. Press ln, not log, when your calculator labels the base-10 function as log. If ln appears above another key, use the calculator’s shift or second-function key first.
  4. Apply ln in the right order. On a calculator that takes the function first, press ln, enter x, then close the parenthesis if one appears. On a calculator that takes the number first, enter x and then press ln. Follow the displayed expression and use parentheses when needed.
  5. Evaluate the expression. Press the equals or enter key if the calculator has not already evaluated it. Read the result as ln(x), not as x itself or as a base-10 logarithm.
  6. Check the result’s sign and size. If x is greater than 1, ln(x) is positive. If x is between 0 and 1, it is negative. If x is 1, the answer is 0. These checks catch many entry errors.
  7. Verify when accuracy matters. Raise e to the displayed result using the calculator’s ex function, often accessed with a shift key, or calculate exp(y). The answer should be close to your original x, allowing for rounding.

Common Mistakes

  • Pressing log instead of ln: On many calculators log means log base 10. For example, log(10) = 1, while ln(10) ≈ 2.302585. Check the key label and, if unsure, test it with x = e: ln(e) should be about 1.
  • Entering the function in the wrong order: Function-first and number-first calculators behave differently. Check the screen before evaluating; it should show an expression equivalent to ln(x).
  • Using zero or a negative number: ln(0) and ln of a negative number are not finite real results. A calculator may show an error or a complex-number result if complex mode is enabled.
  • Confusing ln(x) with ex: These are inverse operations. ln(x) finds the exponent for a given x; ex starts with an exponent and returns a number.
  • Rounding too soon: Keep the original input and full displayed precision through later calculations. Round the final answer to a precision appropriate for the data and purpose.
  • Taking the logarithm of a dimensional value without context: In scientific formulas, logarithms generally apply to dimensionless quantities. Use a stated reference value to form a ratio rather than treating a measurement with units as an unqualified logarithm input.

Tips

  • Remember that ln always means logarithm base e, while log often means base 10. Notation can vary, so check the calculator’s manual or display.
  • Use the identity ln(1) = 0 as a quick key-entry check. Another useful check is ln(e) = 1.
  • For a base other than e, use the change-of-base formula: logb(x) = ln(x) / ln(b), provided x > 0 and b > 0 with b ≠ 1. You can also use the equivalent ratio of base-10 logs.
  • Keep enough digits if the result feeds into another calculation. A displayed answer rounded to a few decimals may not retain enough precision for repeated calculations.
  • When comparing results from two calculators, check that both use the same input and the same logarithm base. Small differences in the last digits are usually rounding differences.

Troubleshooting

  • The calculator displays Math Error or Domain Error: Check that x is strictly greater than zero, and confirm that you did not enter a negative sign or an unintended zero.
  • The result is unexpected by a large amount: Confirm that you pressed ln rather than log, and inspect the screen for missing parentheses, a misplaced decimal point, or an incorrect exponent.
  • It returns a complex answer: The input may be negative and the calculator may be in complex mode. For a real natural logarithm, use a positive input. If the problem specifically calls for complex logarithms, use the required complex-number convention instead.
  • The answer differs slightly from an online result: Check the number of digits entered and displayed. Calculators may round intermediate values differently; compare unrounded values if available.
  • Your input has units: Check the equation or scientific context for the intended dimensionless ratio and reference. Do not remove units arbitrarily; a logarithm may be defined on a ratio even when the underlying measurements carry units.

Frequently Asked Questions

Is log base e the same as ln?
Yes. Logarithm base e is written ln, or sometimes loge.

Which calculator button calculates log base e?
Use the ln key. The key marked log usually calculates base 10, although labels can vary by calculator.

What is ln(1)?
ln(1) = 0 because e0 = 1.

Can I calculate the natural log of zero?
Not as a finite real number. As x approaches zero from above, ln(x) decreases without bound, so a calculator reports an error for ln(0).

Can I take the natural log of a negative number?
It has no real-number value. Complex logarithms can handle negative inputs, but their results depend on the complex-log convention and may require complex mode.

How do I calculate log base e if there is no ln key?
If the calculator has log base 10, use ln(x) = log(x) / log(e). Enter the same base-10 function for both parts; for positive x, the ratio gives the natural logarithm.

Related

Formula used
in x | Positive number x | - | 2.718281828 | 0
out y | Natural logarithm ln(x) | - | ln(x) | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →