This calculator converts a volume in liters to a mass in kilograms using the density of the substance. You enter the volume in liters and the density in kilograms per liter (kg/L), and the calculator returns the mass in kilograms. The formula is simple: mass (kg) = volume (L) × density (kg/L).
Formula
The conversion from liters to kilograms relies on the physical relationship between volume, density, and mass:
mass (kg) = volume (L) × density (kg/L)
- mass – the amount of matter, measured in kilograms (kg).
- volume – the space the substance occupies, measured in liters (L).
- density – the mass per unit volume, measured in kilograms per liter (kg/L). For water at 4 °C, density is approximately 1.000 kg/L.
Because density changes with temperature and pressure, the conversion is only valid for the specific conditions you are using. For most everyday purposes, water at room temperature has a density close to 1.0 kg/L, which is why 1 liter of water weighs about 1 kilogram.
Worked Example
Using the default values from the calculator above: volume = 1 L, density = 1.0 kg/L (water at ~4 °C).
- Write the formula: mass = volume × density
- Plug in the numbers: mass = 1 L × 1.0 kg/L
- Multiply: mass = 1.0 kg
The calculator returns 1.000 kg. That matches the well-known fact: 1 liter of water weighs 1 kilogram.
When to Use This Conversion
You need this conversion whenever you have a volume but need a mass, or vice versa. Common situations include:
- Cooking and baking when a recipe gives volume but your scale measures grams.
- Mixing solutions in a lab where you need to weigh a certain amount of a liquid.
- Estimating the weight of a container of liquid (e.g., a 5-liter jug of oil).
- Converting shipping volumes to weights for freight calculations.
Remember that the density must be for the exact substance and temperature you are using. For example, olive oil has a density around 0.91 kg/L, so 1 liter of olive oil weighs about 0.91 kg, not 1 kg.
How to Find the Density
Density values are usually listed in tables for common substances. For a pure liquid, you can look it up in a reference handbook or online database. For a solution or mixture, you may need to measure it or find a specific value. Here are a few typical densities at 20 °C (unless noted):
- Water: 0.998 kg/L (at 20 °C), 1.000 kg/L (at 4 °C)
- Milk: about 1.03 kg/L
- Olive oil: about 0.91 kg/L
- Ethanol: about 0.789 kg/L
- Mercury: about 13.534 kg/L
If you have a solid that is measured in liters (like a volume of granules), the density of that material in bulk form (bulk density) is what you need, which can be very different from the density of the solid itself.
Common Mistakes and Misconceptions
A frequent error is assuming 1 liter always equals 1 kilogram. That is only true for water at 4 °C. For other substances, the mass will be different. Another mistake is using the wrong density unit: density is often given in g/mL or g/cm³, which are numerically equal to kg/L (since 1 g/mL = 1 kg/L). So 0.789 g/mL for ethanol is the same as 0.789 kg/L. However, if density is given in kg/m³ (like 1000 kg/m³ for water), you must divide by 1000 to get kg/L (1000 kg/m³ = 1 kg/L).
Also, temperature matters. Density changes with temperature because most substances expand when heated, so the same volume weighs less at higher temperatures. For precise work, always note the temperature at which the density was measured.
Limitations of the Simple Formula
The formula mass = volume × density assumes a homogeneous substance. For mixtures or solutions, the density may vary with concentration. For gases, density is strongly affected by pressure and temperature, so this conversion is rarely used for gases without specifying conditions. For very precise measurements, you would also account for buoyancy in air, but that is negligible for most practical purposes.
This calculator is for general use and educational purposes. For laboratory work, always follow your lab method, the safety data sheet (SDS), and your supervisor.
Frequently Asked Questions
How many kg is 1 liter of water?
At 4 °C, 1 liter of water has a mass of exactly 1 kilogram because the density of water is 1.000 kg/L. At room temperature (20 °C), it is 0.998 kg, so for most everyday purposes you can round to 1 kg.
Is 1 liter always 1 kg?
No. 1 liter equals 1 kg only for water at 4 °C. For other substances, the mass depends on density. For example, 1 liter of olive oil weighs about 0.91 kg, and 1 liter of mercury weighs about 13.5 kg.
How do I convert liters to kg without a calculator?
Multiply the volume in liters by the density in kg/L. If you don’t have a density, you cannot do the conversion accurately. For water, you can use 1 kg/L as an approximation.
What is the difference between liters and kilograms?
Liters measure volume (space occupied), while kilograms measure mass (amount of matter). They are different physical quantities. Converting between them requires density, which links the two.
Can I convert liters to kg for any liquid?
Yes, if you know the density of that liquid at the given temperature. Every liquid has a density, so the conversion is always possible with the correct density value.
Does temperature affect the conversion?
Yes. Most substances expand when heated, so their density decreases. That means a liter of hot liquid weighs slightly less than a liter of the same cold liquid. For precise work, use the density at the actual temperature.
Related
Formula used
in v | Volume | L | 1 | 0 in d | Density | kg/L | 1.0 | 0 out m | Mass | kg | v * d | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol