molecalculator

Moles & Molar Mass

Potassium Hydroxide Manufacturers in India: Top List

Calculator No. 01-12661 · Updated · Formula and assumptions shown below

Molarity 0.2083 mol/L
Concentration in millimolar
208.31 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
56.11 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Potassium hydroxide (KOH) manufacturers in India include Tata Chemicals, Gujarat Alkalies and Chemicals Limited (GACL), and Grasim Industries, along with several mid-sized producers in Gujarat and Maharashtra. These companies produce solid flakes, pellets, and liquid KOH primarily via electrolysis of potassium chloride (KCl) solution. The domestic market is largely consolidated, with a few large players supplying most of the industrial demand, while smaller manufacturers cater to regional soap, fertilizer, and chemical processing needs.

Formula

The molarity (M) of a potassium hydroxide solution is calculated as:

M = mass of KOH (g) / (molar mass of KOH (g/mol) × volume of solution (L))

Where:

  • m = mass of KOH solute in grams (g)
  • mm = molar mass of KOH, 56.11 g/mol (K=39.10, O=16.00, H=1.01)
  • v = final volume of the solution in milliliters (mL), converted to liters by dividing by 1000

The first output gives molarity in mol/L (M), and the second output shows the same concentration in millimolar (mM), which is simply molarity × 1000.

Worked Example

Using the default values from the calculator: dissolve 2.922 g of KOH in enough water to make 250 mL of solution.

  1. Convert volume to liters: 250 mL / 1000 = 0.250 L
  2. Calculate moles of KOH: 2.922 g / 56.11 g/mol = 0.05208 mol (rounded to 5 significant figures)
  3. Divide moles by volume: 0.05208 mol / 0.250 L = 0.2083 mol/L

The calculator shows 0.2083 M (rounded to 4 decimal places) and 208.3 mM. This matches the formula output exactly.

Assumptions

  • The KOH is pure (≥99% assay) and completely dissociates into K⁺ and OH⁻ ions in water.
  • The final volume is measured after dissolution, not the volume of solvent added. KOH dissolution is exothermic, so you must cool the solution to room temperature before topping up to the mark.
  • The density of the solution is assumed to be close to 1 g/mL for dilute solutions; for concentrated solutions (above ~5 M), use density tables.

Background: Why India’s KOH Market Is Concentrated

Potassium hydroxide is produced commercially by electrolysis of an aqueous potassium chloride solution, similar to the chlor-alkali process used for sodium hydroxide. India’s production capacity is tied to the availability of potash (KCl) feed, which is largely imported. The major manufacturers are integrated chlor-alkali producers that also make chlorine, hydrogen, and hydrochloric acid. The largest plants are located near ports and salt mines in Gujarat, Maharashtra, and Tamil Nadu to minimize raw material transport costs.

The Indian KOH market is estimated to be around 200,000–250,000 metric tons per year, with demand growing at 4–5% annually, driven by fertilizers, potassium carbonate, potassium permanganate, and liquid soaps. However, domestic production meets only about 60–70% of demand; the rest is imported from China, South Korea, and the Middle East.

How to Choose a KOH Manufacturer in India

When selecting a supplier, consider these factors:

  • Purity and grade: Look for ≥90% (technical), ≥85% (commercial), or ≥99% (reagent) assay. Flakes and pellets have different moisture content (typically 0.5–1.5%).
  • Form: Solid forms (flakes, pellets, micropearls) are easier to handle, while liquid KOH (45–50% solution) is cheaper per unit but costly to transport.
  • Packaging: KOH is hygroscopic; drums must be airtight. Check if the supplier offers nitrogen-purged bags or drums with desiccant.
  • Certifications: For food, pharmaceutical, or cosmetic use, require ISO 9001, GMP, and relevant FSSAI or Indian Pharmacopoeia compliance.
  • Logistics: Lead time, minimum order quantity (MOQ), and proximity to your plant matter. A manufacturer in Gujarat may be cheaper for a client in Ahmedabad than one in Tamil Nadu.

Common Problems When Buying KOH in India

Buyers often face these issues:

  • Adulteration: Some small traders mix KOH with sodium hydroxide or carbonate to cut costs. Always test the assay by titration with standard acid.
  • Moisture absorption: KOH attracts water from air; if the packaging is damaged, the product becomes sticky and less pure. Check the net weight and moisture content on arrival.
  • Pricing volatility: KOH prices in India fluctuate with international KCl prices and import duties. Lock in contracts with price escalation clauses.
  • Transport restrictions: KOH is classified as a corrosive (UN 1813/1814). Road transport requires proper placarding and driver training; not all logistics firms handle it.

Comparison: Indian vs. Imported KOH

Indian manufacturers generally offer competitive prices for standard grades, but imported KOH from China or South Korea may have better consistency and lower impurity levels for high-end applications. Imported material is subject to 7.5% basic customs duty plus 18% GST, making it 10–15% more expensive than domestic product. However, for specialty uses like battery electrolyte or pharmaceutical synthesis, imported reagent-grade KOH is often preferred. Indian manufacturers like GACL and Tata Chemicals have improved their quality to meet export standards, so the gap is narrowing.

Cost and Pricing Factors

The price of KOH in India ranges from ₹80 to ₹120 per kg for technical grade (flakes) and ₹120–₹160 per kg for reagent grade, depending on quantity and form. Liquid KOH (45% solution) is typically ₹40–₹60 per kg. Key cost drivers include:

  • Raw material: KCl import price (around ₹30–₹40 per kg)
  • Electricity: Electrolysis is energy-intensive; power costs vary by state.
  • Freight: Bulk liquid transport is cheaper per kg than packaged solid.
  • GST: 18% on most chemical sales, but input credit may be available.

Safety and Handling

KOH is a strong base that causes severe chemical burns. Always wear goggles, rubber gloves, and a chemical-resistant apron when handling. Dissolve KOH by adding it slowly to water (never the reverse) while stirring, because the reaction is highly exothermic. Store in a cool, dry, well-ventilated area away from acids and moisture. In case of skin contact, rinse with plenty of water for at least 15 minutes. For lab work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Frequently Asked Questions

Which Indian states have the most KOH manufacturers?
Gujarat leads with the largest number of plants, followed by Maharashtra and Tamil Nadu. The coastal locations give easy access to imported KCl and export facilities.

What is the difference between KOH flakes and pellets?
Flakes are thin, irregular pieces that dissolve quickly; pellets are small cylinders that are less dusty and easier to weigh accurately. Both have the same chemical purity; the choice depends on your handling preference.

Can I use KOH instead of NaOH in soap making?
Yes, but KOH produces a softer, more water-soluble soap (liquid soap) while NaOH gives hard bar soap. Many soap makers use a blend of both. The saponification value of KOH is different, so you must recalculate the lye amount.

Is KOH available in liquid form from Indian manufacturers?
Yes, several manufacturers supply 45–50% KOH solution in tankers or drums. It is cheaper per unit of KOH but has higher transport costs and requires corrosion-resistant storage tanks.

How do I verify the purity of KOH I receive?
Titrate a known mass of KOH solution against a standard hydrochloric acid solution using phenolphthalein as indicator. The molarity you calculate tells you the actual KOH content. For quick field checks, use a pH meter on a dilute solution, but titration is more accurate.

Limits of This Calculator

This molarity calculator assumes pure, dry KOH and complete dissolution. Real KOH often contains 10–15% water (as moisture) or carbonate impurities. If you use a technical grade with known assay (e.g., 85%), multiply the mass by the assay fraction before entering it. Also, the final volume method assumes you are making a solution of a given molarity; if you are diluting a concentrated stock, use the dilution calculator instead. Always measure the actual concentration by titration for critical applications.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 56.11 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →