The standard enthalpy of formation (ΔfH°) of a compound is the heat change when one mole of the compound forms from its elements in their standard states at 1 bar (or 1 atm) and a specified temperature, usually 25 °C. The formula is ΔrH° = Σ ΔfH°(products) − Σ ΔfH°(reactants), which lets you calculate the enthalpy of any reaction from tabulated formation values. This page explains the formula, how to use it, and the assumptions behind it.
Formula
The standard enthalpy of formation formula is written as:
ΔrH° = Σ (ν × ΔfH°)products − Σ (ν × ΔfH°)reactants
- ΔrH° = standard enthalpy of reaction (kJ/mol)
- ν = stoichiometric coefficient (dimensionless)
- ΔfH° = standard molar enthalpy of formation (kJ/mol)
The Σ symbol means “sum of.” You multiply each substance’s formation enthalpy by its coefficient in the balanced equation, add them for products, add them for reactants, and subtract.
For a pure element in its standard state (e.g., O2(g), C(graphite), Fe(s)), ΔfH° = 0 by definition. This is why formation enthalpies are “relative” values—they are measured relative to the elements.
Worked Example
Calculate the heat released when 16.04 g of methane (CH4) burns completely. The combustion reaction is:
CH4(g) + 2 O2(g) → CO2(g) + 2 H2O(l)
Given: ΔfH°(CH4) = −74.87 kJ/mol, ΔfH°(CO2) = −393.51 kJ/mol, ΔfH°(H2O(l)) = −285.83 kJ/mol, ΔfH°(O2) = 0.
- Moles of CH4: 16.04 g ÷ 16.04 g/mol = 1.000 mol
- ΔrH° = [1×(−393.51) + 2×(−285.83)] − [1×(−74.87) + 2×0]
- ΔrH° = [−393.51 − 571.66] − [−74.87] = −965.17 + 74.87 = −890.30 kJ/mol
- Heat released for 1 mol: q = 1.000 mol × (−890.30 kJ/mol) = −890.30 kJ
The calculator gives −890.30 kJ, matching. The negative sign means heat is released (exothermic).
Assumptions
- Standard state: 1 bar pressure (or 1 atm, depending on convention) and a specified temperature, usually 25 °C.
- All reactants and products are in their standard physical states (gas, liquid, solid) as indicated.
- Formation enthalpies are for pure substances, not mixtures or solutions.
- The reaction goes to completion, and no other reactions occur.
How to Choose the Correct Formation Enthalpies
The most common mistake is using the wrong physical state. Water has different values: H2O(l) = −285.83 kJ/mol, H2O(g) = −241.82 kJ/mol. The difference (44.01 kJ/mol) is the enthalpy of vaporization. Always match the state in your balanced equation.
Also, check the temperature. Most tables list values at 298.15 K (25 °C). If your reaction is at a different temperature, you need to adjust using heat capacities (Kirchhoff’s law), but for most textbook problems 25 °C is assumed.
Elements have zero formation enthalpy only in their most stable form at standard conditions. For example, carbon as graphite is 0, but diamond is +1.90 kJ/mol. Oxygen as O2(g) is 0, but O3(g) is +142.7 kJ/mol.
Common Mistakes and Misconceptions
- Forgetting to multiply by coefficients: Each formation enthalpy must be multiplied by the stoichiometric coefficient in the balanced equation.
- Sign errors: The formula is products minus reactants. Reversing it gives the wrong sign and magnitude.
- Using formation enthalpy of a compound as if it were the reaction enthalpy: Formation enthalpy is for forming from elements, not for a specific reaction.
- Ignoring state symbols: Using H2O(g) when the product is liquid water changes the result by 44 kJ/mol.
Why Formation Enthalpies Are Useful
Formation enthalpies let you calculate reaction enthalpies without doing calorimetry for every reaction. They are tabulated for thousands of compounds. The formula works for any reaction, including combustion, synthesis, decomposition, and even biochemical reactions (though biological values are often given at pH 7).
For example, the enthalpy of formation of glucose is −1273.3 kJ/mol. You can combine it with CO2 and H2O values to find the energy released by cellular respiration.
Another use: Hess’s law. Formation enthalpies are essentially a shortcut for Hess’s law—you’re summing the steps that form products from elements and then decompose reactants to elements.
Limitations of the Formula
The formula assumes ideal behavior and constant pressure. For gases at high pressure or real solutions, the enthalpy may differ. Also, formation enthalpies are temperature-dependent; the tabulated values are only for 25 °C. For reactions at other temperatures, you need heat capacity data.
For ionic compounds in solution, you often need enthalpies of formation of aqueous ions (e.g., Na+(aq) = −240.1 kJ/mol, Cl−(aq) = −167.2 kJ/mol) rather than the solid salt. The convention sets ΔfH°(H+(aq)) = 0.
Finally, the formula gives the enthalpy change, not the free energy change. For spontaneity, you need ΔG°, which also involves entropy.
Practical Tips for Using the Calculator
Enter the mass of the reactant and its molar mass. The calculator computes moles and then multiplies by the reaction enthalpy per mole (ΔrH°) that you provide. You can get ΔrH° from formation enthalpies as shown above, or from calorimetry.
The result is the heat released (negative) or absorbed (positive) for that amount of reactant. For a reaction with multiple reactants, you must identify the limiting reactant first—the calculator assumes the given mass is the limiting reactant.
For per-gram values, the calculator divides ΔrH° by the molar mass, giving kJ per gram of that reactant. This is useful for comparing fuels.
Frequently Asked Questions
What is the standard enthalpy of formation of an element?
It is zero for the element in its most stable form at standard conditions. For example, O2(g), C(graphite), and Fe(s) all have ΔfH° = 0. This is a convention that sets a reference point for all other compounds.
Why is the formation enthalpy of water different for liquid and gas?
Because forming gaseous water requires extra energy to vaporize the liquid. The difference is the enthalpy of vaporization, about 44 kJ/mol at 25 °C. Always use the state that matches your reaction.
Can I use formation enthalpies for reactions at high temperatures?
Not directly. The tabulated values are for 25 °C. For other temperatures, you need to correct using heat capacities (Kirchhoff’s law). For rough estimates, the error may be small for reactions with similar heat capacities, but for precise work, use temperature-adjusted values.
What is the difference between enthalpy of formation and enthalpy of combustion?
Enthalpy of formation is the heat change when one mole of a compound forms from its elements. Enthalpy of combustion is the heat change when one mole of a substance burns completely in oxygen. Combustion enthalpies are often used for fuels, while formation enthalpies are used to calculate reaction enthalpies.
How do I get the formation enthalpy of an ion in solution?
Ionic formation enthalpies in aqueous solution are tabulated relative to H+(aq), which is set to 0. For example, Na+(aq) is −240.1 kJ/mol and Cl−(aq) is −167.2 kJ/mol. Use these for reactions involving dissolved ions.
Why is my calculated reaction enthalpy different from a published value?
Check the states of matter, the temperature, and the pressure. Also ensure you used the correct stoichiometric coefficients and that your balanced equation is correct. Differences can also arise from using 1 atm vs 1 bar (the difference is tiny, usually less than 0.1 kJ/mol).
Related
Formula used
in m | Mass of reactant | g | 16.04 | 0 in mm | Molar mass of reactant | g/mol | 16.04 | 0.001 in n | Moles of reactant | mol | m / mm | 0 in dh | Enthalpy of reaction per mole (ΔrH°) | kJ/mol | -890.3 | -10000 out q | Heat released (q) | kJ | n * dh | 2 out qk | Heat per gram | kJ/g | dh / mm | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol