A serial dilution is a stepwise set of dilutions where each step reduces the concentration by a fixed factor (usually 10-fold or 2-fold), and a diagram of the method shows a row of tubes or wells, each containing the same diluent volume, with a set volume transferred from the previous tube to the next. You start with a stock solution, transfer a known volume into the first tube, mix, then transfer the same volume from that tube into the next, and repeat; the diagram typically labels each tube with its dilution factor (e.g., 1:10, 1:100, 1:1000).
Formula
The core relationship for a single dilution step is:
Dilution factor per step = (volume transferred + diluent volume) ÷ volume transferred
For a 10-fold serial dilution, you transfer 1 mL of stock into 9 mL of diluent, so the factor is (1 + 9) ÷ 1 = 10. After n identical steps, the overall dilution factor is:
Overall dilution factor = (per-step factor)n
And the final concentration is:
Cfinal = Cstock ÷ (per-step factor)n
Where:
- Cstock – starting concentration (mol/L, g/L, or any consistent unit)
- vtransfer – volume moved each step (mL)
- vdiluent – volume of diluent already in each tube (mL)
- n – number of transfer steps
The calculator above uses exactly this logic: it takes your stock concentration, the transfer volume, the diluent volume, and the number of steps, then returns the final concentration and the overall dilution factor.
Worked Example
Using the default values from the calculator – stock concentration 1 mol/L, transfer 1 mL into 9 mL diluent, 4 steps:
- Per-step factor = (1 + 9) ÷ 1 = 10
- Overall dilution factor = 104 = 10,000
- Final concentration = 1 ÷ 10,000 = 0.0001 mol/L = 1 × 10−4 mol/L
The calculator shows 0.0001 mol/L (or 1e-4) and an overall dilution factor of 10000. That matches the manual calculation exactly.
Assumptions
- Each step is mixed thoroughly before the next transfer – otherwise the concentration is not uniform.
- The transfer volume is exactly the same every step (using a calibrated pipette).
- The diluent volume is identical in every tube.
- Solutions are ideal – volumes are additive (true for most aqueous dilutions at these concentrations).
- The stock concentration is accurately known.
How to Draw a Serial Dilution Diagram
A standard diagram shows a row of test tubes or microcentrifuge tubes. Each tube contains the same volume of diluent (e.g., 9 mL). Above the first tube, draw the stock solution. Draw an arrow from the stock to the first tube labeled with the transfer volume (e.g., “1 mL”). After mixing, draw an arrow from the first tube to the second, again labeled “1 mL”. Continue for each step. Below each tube, write the cumulative dilution factor: 1:10, 1:100, 1:1000, etc. For a 2-fold dilution, use 1:2, 1:4, 1:8.
Key elements to include in any diagram:
- Tube labels (e.g., “Tube 1”, “Tube 2”)
- Diluent volume in each tube (e.g., “9 mL”)
- Transfer volume between tubes (e.g., “1 mL”)
- Final dilution factor under each tube
- Concentration in each tube if known
Choosing the Dilution Factor and Number of Steps
The most common factors are 10-fold, 2-fold, and sometimes 5-fold. The choice depends on the required final concentration and the precision you need.
- 10-fold serial dilution – fastest way to span many orders of magnitude (e.g., from 1 M down to 1 µM in 6 steps). Used for counting colonies, standard curves, and most microbiology work.
- 2-fold serial dilution – gives finer steps, often used for titrations (e.g., antibody or enzyme assays) where you need a gradual response curve.
- 5-fold – a middle ground, less common but useful when 10-fold is too coarse and 2-fold is too many tubes.
To decide the number of steps, work out the total dilution needed: if you need a 1:1,000,000 dilution, a 10-fold series needs 6 steps (106). A 2-fold series would need about 20 steps (220 ≈ 1,048,576) – impractical. So choose the factor that keeps the step count reasonable.
Common Mistakes and How to Avoid Them
- Forgetting to change pipette tips – this carries over extra sample and ruins the dilution. Always use a fresh tip for each transfer.
- Not mixing thoroughly – if the solution is not homogeneous after mixing, the next transfer will not be the intended concentration. Vortex or pipette up and down at least 5 times.
- Using the wrong diluent volume – if you add 10 mL instead of 9 mL, the factor changes from 10 to 11. Check volumes before starting.
- Confusing dilution factor with concentration – a 1:10 dilution means the concentration is 1/10 of the stock, not 10 times. The dilution factor is the denominator.
- Not labeling tubes – after a few steps, it is easy to lose track. Label each tube with its dilution factor immediately.
- Assuming volumes are additive – for most aqueous solutions, this is fine, but for concentrated acids or alcohols, volume contraction can occur. For precise work, prepare dilutions by mass or use volumetric flasks.
Applications of Serial Dilution
Serial dilution is used in virtually every biology and chemistry lab:
- Microbiology – counting viable cells by plating dilutions so that colonies are countable (30–300 per plate).
- Biochemistry – preparing standard curves for protein assays (e.g., Bradford or BCA) where you need known concentrations of a standard protein.
- Immunology – titrating antibodies to find the effective concentration.
- Pharmacology – testing drug efficacy across a range of concentrations (IC50 determinations).
- Chemistry – making a series of standards for atomic absorption or UV-Vis spectroscopy.
In each case, the goal is to produce a set of solutions with known, evenly spaced (on a log scale) concentrations.
Frequently Asked Questions
What is the difference between a serial dilution and a simple dilution?
A simple dilution is a one-step dilution – you take a volume of stock and add diluent to get a final volume. A serial dilution is a series of simple dilutions done in sequence, each using the previous dilution as the new stock. This allows you to reach extremely high dilution factors (like 109) without needing enormous volumes.
How do I calculate the concentration in each tube of a serial dilution?
Multiply the stock concentration by the dilution factor of that tube. For a 10-fold series starting at 1 M, tube 1 is 0.1 M, tube 2 is 0.01 M, tube 3 is 0.001 M, and so on. In general, concentration in tube n = stock ÷ (factor)n.
Why do I need to mix the tube before transferring?
Mixing ensures the solution is uniform. If you don’t mix, the concentration in the tube is not homogeneous, and the volume you transfer will not represent the intended dilution. This is the most common source of error in serial dilutions.
Can I use a serial dilution for counting bacteria?
Yes, that is a classic use. You dilute a bacterial culture in a 10-fold series, then plate a small volume (e.g., 100 µL) from several dilutions onto agar. After incubation, you count colonies on a plate with 30–300 colonies, multiply by the dilution factor, and divide by the plated volume to get the original concentration in CFU/mL.
What does a 1:2 dilution mean in a serial dilution?
A 1:2 dilution means you mix 1 part sample with 1 part diluent (total 2 parts), so the concentration is halved. In a serial 2-fold dilution, each tube is half the concentration of the previous one: 1:2, 1:4, 1:8, 1:16, etc.
How do I make a serial dilution if I don’t have enough pipette tips?
You can reuse a tip only if you go from the most dilute to the most concentrated, but that is not recommended because it introduces contamination. The standard practice is to use a fresh tip for each transfer. If tips are limited, consider using a multi-channel pipette or reducing the number of steps, but accuracy will suffer.
Safety and Best Practices
Always follow your lab’s safety protocols, the safety data sheet (SDS) for the chemicals you are using, and your supervisor’s instructions. When working with biological samples, treat them as potentially infectious. Wear appropriate PPE (gloves, lab coat, safety glasses). For volatile or hazardous solvents, work in a fume hood. Dispose of waste according to your institution’s rules. The calculator here is for planning and educational purposes – it does not replace proper laboratory technique.
Related
Formula used
in c0 | Stock concentration | mol/L | 1 | 0 in v0 | Volume transferred each step | mL | 1 | 0 in vt | Diluent volume in each tube | mL | 9 | 0 in n | Number of dilution steps | steps | 4 | 1 | 10 out cf | Final concentration | mol/L | c0 / ( (v0 + vt) / v0 )^n | 6 out df | Overall dilution factor | - | ( (v0 + vt) / v0 )^n | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol