molecalculator

Moles & Molar Mass

Base x Height Formula: Area of Rectangles & Triangles

Calculator No. 01-6953 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator computes the area of a rectangle, parallelogram, or triangle using the base × height formula. Enter the base length and the perpendicular height (and shape type for triangles), and you get the area in square units. The result is the same unit squared as the inputs (e.g., cm × cm = cm²).

Formula

For a rectangle or parallelogram: Area = base × height (A = b × h). For a triangle: Area = ½ × base × height (A = ½ × b × h).

Here, b is the length of the base (any side you choose), and h is the perpendicular height—the shortest distance from the base to the opposite vertex (or opposite side for a parallelogram), measured at a right angle to the base. The base and height must be in the same unit; the area is in square units of that unit.

Worked Example

Using the default values from the calculator: base = 5 m, height = 3 m, shape = rectangle (factor = 1).

Step 1: Identify base and height. Base = 5 m, height = 3 m.

Step 2: Multiply base by height. 5 × 3 = 15.

Step 3: Apply the shape factor. For a rectangle, factor = 1, so area = 15 m².

If you switch the shape to triangle, the factor becomes 0.5: area = 0.5 × 5 × 3 = 7.5 m².

The calculator shows 15.00 m² for the rectangle, matching our manual calculation.

Assumptions

  • The height is measured perpendicular to the base (not along a slanted side).
  • The shape is a simple, non-overlapping polygon (rectangle, parallelogram, or triangle).
  • Units of base and height are the same; if not, convert first.

Why Base × Height Works

The formula comes from counting unit squares. A rectangle with base 5 and height 3 has 5 columns and 3 rows of unit squares, giving 15 squares. A parallelogram can be cut and rearranged into a rectangle with the same base and height, so it shares the same formula. A triangle is exactly half of a parallelogram with the same base and height (imagine doubling the triangle to form a parallelogram), hence the ½ factor.

How to Choose the Base and Height

Any side can be the base, but the height must be perpendicular to that side. For a triangle, pick a side, then measure the perpendicular distance from that side to the opposite vertex. For a parallelogram, pick a side, then measure the perpendicular distance to the opposite side. In a rectangle, the height is simply the other side length.

Common Mistakes and Misconceptions

  • Using a slanted side as height: In a parallelogram, the slanted side is longer than the perpendicular height. Using it overestimates the area.
  • Forgetting the ½ for triangles: A triangle is half a parallelogram, so omitting the ½ doubles the area.
  • Mismatched units: If base is in meters and height in centimeters, convert one to the other before multiplying.
  • Confusing perimeter with area: Base × height gives area (square units), not perimeter (linear units).

Real-World Applications

This formula is used in construction (floor area of rectangular rooms), land measurement (triangular plots), geometry homework, and even in physics for calculating pressure (force per unit area). For example, a rectangular garden bed 4 m long and 2 m wide has an area of 8 m², which tells you how much soil is needed. A triangular roof gable with base 6 m and height 2 m has area 6 m², useful for estimating paint coverage.

Limits of the Formula

The base × height formula applies only to rectangles, parallelograms, and triangles. It does not work for trapezoids (which need (base1 + base2)/2 × height), circles (πr²), or irregular shapes. Also, the height must be perpendicular; if you only know side lengths and an angle, you need trigonometry (area = ½ × a × b × sin(C)) for triangles. The formula assumes a flat, two-dimensional shape—it doesn’t account for curvature or three-dimensional surface area.

Frequently Asked Questions

Is base × height the same as length × width?

Yes, for a rectangle. “Base” and “height” are just generic names; in a rectangle, the base is one side and the height is the adjacent side, so base × height equals length × width. The term “base” is often used when the shape is oriented with one side on the bottom, but the formula works regardless of orientation.

Why is the triangle formula half of base × height?

Because a triangle is exactly half of a parallelogram with the same base and height. If you duplicate a triangle and rotate it 180°, you can join the two to form a parallelogram. The parallelogram’s area is base × height, so the triangle’s is half that.

Can I use any side as the base in a triangle?

Yes, any side works, but you must use the height perpendicular to that side. Different bases give different heights, but the product (base × height) is always the same for a given triangle, so the area is consistent.

What if I only know the three side lengths of a triangle?

You can use Heron’s formula: area = √(s(s-a)(s-b)(s-c)), where s is the semi-perimeter (a+b+c)/2. This avoids needing the height. Or, if you know an angle, use area = ½ × a × b × sin(C).

Does base × height work for a rhombus or a kite?

For a rhombus (a parallelogram with all sides equal), yes—base × perpendicular height works, since it’s a parallelogram. For a kite, no, because a kite is not a parallelogram; its area is (diagonal1 × diagonal2)/2, using the diagonals.

How do I convert area to different units?

Convert the base and height to the same unit first, then multiply. For example, if base is 2 m and height is 50 cm, convert 50 cm to 0.5 m, then area = 2 × 0.5 = 1 m². To convert square units, use conversion factors squared: 1 m² = 10,000 cm² (since 1 m = 100 cm, and 100² = 10,000).

Related

Formula used
in b | Base | m | 5 | 0
in h | Height | m | 3 | 0
sel shape | Shape | Rectangle=1, Parallelogram=1, Triangle=0.5
out A | Area | m² | shape * b * h | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →