This listicle explains how to convert 20 grams (g) to liters (L) for various substances, from water to cooking oils, and provides a calculator to do the math instantly. It’s for students, cooks, and anyone who needs to translate a mass measurement into a volume for a specific material.
Formula
The conversion from grams to liters depends on the substance’s density (ρ). The formula is:
Volume (L) = Mass (g) / (Density (g/mL) × 1000)
Where:
– Mass is in grams (g)
– Density is in grams per milliliter (g/mL), a property of the substance
– 1000 converts mL to L (1 L = 1000 mL)
Worked Example
Using the calculator above with default values: mass = 2.922 g, molar mass = 58.44 g/mol (NaCl), final volume = 250 mL.
First, calculate moles: 2.922 g / 58.44 g/mol = 0.05 mol.
Then, convert volume to liters: 250 mL / 1000 = 0.25 L.
Molarity = 0.05 mol / 0.25 L = 0.2 mol/L.
Millimolar = 0.2 × 1000 = 200 mM.
Assumptions
- For the calculator, the solute is fully dissolved and the final volume is used (not solvent volume).
- For density-based conversions, the substance is pure and at standard conditions (e.g., 20°C for water).
- Temperature and pressure affect density; the calculator uses a fixed density input.
1. Water (at 4°C)
Water has a density of 1.000 g/mL at 4°C, so 20 g of water equals 20 mL or 0.020 L. This is the baseline for most kitchen conversions. At room temperature (20°C), density is 0.998 g/mL, giving 20.04 mL, a negligible difference for most purposes.
2. Milk (Whole)
Whole milk has a density of about 1.03 g/mL, so 20 g is approximately 19.4 mL or 0.0194 L. The density varies slightly with fat content; skim milk is closer to 1.035 g/mL. For recipes, this difference is small but can matter in precise baking.
3. Olive Oil
Olive oil density is about 0.91 g/mL, so 20 g converts to 22.0 mL or 0.0220 L. This is a common conversion in Mediterranean cooking, where oil is often measured by weight. The lower density means a given mass occupies more volume than water.
4. Honey
Honey is dense, around 1.42 g/mL, so 20 g is only 14.1 mL or 0.0141 L. This high density is why honey sinks in water and why a tablespoon of honey weighs more than a tablespoon of water. When measuring honey, using weight is more accurate than volume because of its stickiness.
5. Ethanol (Pure)
Pure ethanol has a density of 0.789 g/mL, giving 25.3 mL or 0.0253 L for 20 g. This is relevant in lab settings when preparing solutions. Note that ethanol-water mixtures have different densities than pure ethanol, so always check the specific solution’s density.
6. Glycerol
Glycerol (glycerin) has a density of 1.26 g/mL, so 20 g equals 15.9 mL or 0.0159 L. It’s a common ingredient in cosmetics and pharmaceuticals, often measured by weight. Its viscosity makes volumetric measurement tricky, so weight is preferred.
7. Acetone
Acetone density is 0.784 g/mL, so 20 g is 25.5 mL or 0.0255 L. This solvent is used in labs and nail polish remover. Because it’s volatile, density can change with temperature, so measure at the temperature specified.
8. Mercury
Mercury is extremely dense at 13.534 g/mL, so 20 g is only 1.48 mL or 0.00148 L. This extreme density is why mercury is used in barometers. Handling mercury requires strict safety protocols due to its toxicity; this conversion is for theoretical or industrial contexts.
9. Air (at sea level)
Air density at 15°C and 1 atm is about 0.001225 g/mL, so 20 g of air occupies 16,326 mL or 16.3 L. This is a huge volume compared to liquids, illustrating why gas conversions are often done with molar volume (22.4 L/mol at STP) rather than density for precise work.
10. Butter (Melted)
Melted butter has a density of about 0.911 g/mL, so 20 g is 21.9 mL or 0.0219 L. This is similar to oil because butter is mostly fat. When a recipe calls for melted butter by volume, using weight ensures accuracy, especially since solid butter has air pockets.
11. Flour (All-Purpose)
All-purpose flour density is about 0.529 g/mL (varies with sifting), so 20 g is roughly 37.8 mL or 0.0378 L. This is why measuring flour by volume is inconsistent; a cup can weigh 120-150 g depending on how it’s scooped. For baking, always use weight.
12. Sugar (Granulated)
Granulated sugar density is about 0.845 g/mL, so 20 g is 23.7 mL or 0.0237 L. This is close to water, but slightly less dense. In recipes, sugar is often measured by volume, but weight is more reliable for consistent results.
13. Salt (Table)
Table salt density is about 1.20 g/mL (crystals have air spaces), so 20 g is 16.7 mL or 0.0167 L. However, fine salt packs differently than coarse salt, so density can range from 1.1 to 1.3 g/mL. For precise solutions, weigh the salt.
14. Sand (Dry)
Dry sand density is about 1.6 g/mL, so 20 g is 12.5 mL or 0.0125 L. Sand density varies with grain size and compaction. This conversion is useful in construction or aquarium setups where sand is measured by weight but needs volume estimation for containers.
15. Aluminum (Solid)
Aluminum has a density of 2.70 g/mL, so 20 g is 7.41 mL or 0.00741 L. This is for solid metal, not powder. In recycling or machining, converting weight to volume helps estimate part sizes. Note that alloys have different densities.
16. Gold (Pure)
Gold density is 19.32 g/mL, so 20 g is only 1.04 mL or 0.00104 L. This high density makes gold easy to test by volume displacement. For jewelry, gold is alloyed, reducing density, so this applies to pure gold only.
17. Oxygen Gas (at STP)
At standard temperature and pressure (0°C, 1 atm), oxygen gas density is 0.001429 g/mL, so 20 g occupies 14,000 mL or 14.0 L. This is close to the molar volume concept: 32 g (one mole) occupies 22.4 L, so 20 g is 14 L. This is essential for gas law calculations.
18. Helium Gas
Helium density at STP is 0.0001786 g/mL, so 20 g is 112,000 mL or 112 L. This huge volume explains why helium balloons float. In practice, helium is measured in liters for filling balloons, but weight is used in industrial contexts.
19. Concrete (Cured)
Cured concrete density is about 2.4 g/mL, so 20 g is 8.33 mL or 0.00833 L. This is for solid concrete; wet concrete is slightly less dense. In construction, converting weight to volume helps estimate material needs, but mix design varies.
20. Human Blood (Approx.)
Human blood has a density of about 1.06 g/mL, so 20 g is 18.9 mL or 0.0189 L. This is an average; blood density varies with hematocrit. In medical contexts, blood is measured in mL, and this conversion is for educational understanding, not for actual medical use.
How to Choose
When converting grams to liters, the key factor is the substance’s density. Always use the density that matches your temperature and pressure conditions. For pure substances, look up the density in a reliable reference. For mixtures, you may need to measure density directly using a hydrometer or pycnometer. If you’re preparing a solution, remember that the final volume is what matters, not the solvent volume.
Frequently Asked Questions
Q: Can I convert grams to liters without knowing the density?
A: No, you must know the density of the substance. For water, it’s 1 g/mL, but for other materials, it varies.
Q: Why is the conversion different for gases?
A: Gases are compressible, so their density depends heavily on temperature and pressure. Use the ideal gas law or standard molar volume for gases.
Q: How does temperature affect the conversion?
A: Most substances expand when heated, decreasing density. For water, density changes from 1.000 at 4°C to 0.998 at 20°C, a small but measurable difference.
Q: What is the difference between mass and volume?
A: Mass is the amount of matter (grams), while volume is the space it occupies (liters). They are related by density.
Q: Is the conversion the same for solids and liquids?
A: Yes, the formula is the same, but solids often have higher densities. However, powders can have lower bulk densities due to air spaces.
Final Thoughts
Converting 20 g to liters is straightforward once you know the density. Use the calculator above for any substance by entering its density. Remember to check the units and conditions, and for critical applications, verify with a direct measurement.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Bag Volume Calculator: How to Measure Any Bag25.50 L
- Relative Molecular Mass of Copper Sulfate0.0732 mol/L
- Molar Mass of Copper(II) Sulfate (CuSO₄)0.0468 mol/L
- Molar Mass of Hydrated Copper Sulphate (CuSO4·5H2O)0.0468 mol/L
- Molar Mass of Copper(II) Sulfate: Exact Value & How to Find It0.0732 mol/L
- Molar Mass of CuSO4: How to Calculate It0.1000 mol