A base × height calculator finds the area of a triangle by multiplying its base by its perpendicular height and dividing by 2. Enter the base and height in the same unit; the calculator returns the area in the corresponding square unit.
Formula
The triangle area formula is A = (b × h) / 2. Here, A is the area in square units, b is the base length in centimetres, and h is the perpendicular height in centimetres. The calculator reports the product b × h as a secondary value, then halves it to give the triangle’s area. If you enter another matching length unit, such as metres, the numerical formula is unchanged and the result is in square metres.
The height is not necessarily the length of one of the triangle’s sloping sides. It is the shortest distance from the chosen base’s line to the opposite vertex, meeting that line at a right angle. For an obtuse triangle, the perpendicular height may fall on an extension of the base rather than within the triangle.
Worked Example
Using the calculator’s default values, the base is b = 10 cm and the perpendicular height is h = 6 cm.
- Multiply base by height: 10 cm × 6 cm = 60 cm2.
- Divide by 2: 60 cm2 / 2 = 30 cm2.
The triangle’s area is 30.00 cm2. The base-height product shown as the secondary output is 60.00 cm2.
Assumptions
- The shape is a triangle, and the inputs describe a base and its perpendicular height.
- Both lengths use the same unit and are nonnegative.
- The result is a geometric area; it does not account for thickness, surface texture, or measurement uncertainty.
How to Choose the Base and Height
Any side of a triangle can be selected as the base. Once you choose it, use the perpendicular distance from that side’s line to the opposite corner as the height. A triangle has three possible base-height pairs, but each pair produces the same area when measured correctly.
For a right triangle, the two sides that meet at the right angle can be used as base and height. The third side is the hypotenuse, and it is not the height for either of those choices. For example, if the perpendicular sides are 3 m and 4 m, the area is (3 × 4) / 2 = 6 m2. Using the 5 m hypotenuse as the base would require its own perpendicular height, not simply one of the other side lengths.
For an obtuse triangle, a height can lie outside the triangle. Extend the base line if needed and measure at 90 degrees to that line. A slanted distance to the opposite vertex is not a substitute for the perpendicular height.
When This Calculation Is Useful
The formula is useful whenever a triangular region’s base and height are known or can be measured: for classroom geometry, estimating the area of a triangular panel, or working out the area of a triangular section on a plan. It gives area, not perimeter or the length of a side. If you need material for a real project, also account separately for cuts, overlap, waste, and any design allowance; those factors are not part of the geometric formula.
The units square because two lengths are multiplied. Centimetres multiplied by centimetres give square centimetres (cm2); metres multiplied by metres give square metres (m2). A result of 30 cm2 is an area, not 30 cm of length. To convert square units, square the length conversion factor: 1 m = 100 cm, so 1 m2 = 10,000 cm2.
Common Measurement and Unit Errors
- Using a sloping side as the height: height must meet the base at a right angle. A side can be the height only when it is perpendicular to the selected base.
- Mixing units: do not multiply a base in centimetres by a height in metres as if both numbers used the same unit. Convert one first. For example, 50 cm is 0.5 m.
- Forgetting to halve the product: base × height is twice the triangle’s area. The calculator’s first output includes the division by 2.
- Rounding too early: retain the measured values through the calculation, then round the final area to a precision supported by the measurements.
- Confusing area with perimeter: the formula does not add the three side lengths. Perimeter and area answer different questions.
Calculator precision does not make approximate measurements exact. If a base or height was estimated, the final area inherits that uncertainty. For a rough drawing, a result with many decimal places may imply more certainty than the measurements justify.
Limits and Related Methods
This calculator applies only when the region is triangular and a perpendicular height is available. If you know all three side lengths but not a height, Heron’s formula can find the area: first calculate the semiperimeter s = (a + b + c) / 2, then use A = √[s(s − a)(s − b)(s − c)]. The side lengths must describe a valid triangle.
If you know two sides and the angle between them, another equivalent formula is A = (1/2)ab sin(C), where C is the included angle. This works because the height relative to side a is b sin(C). For a polygon made of several triangles, calculate each triangle’s area and add them, ensuring the pieces cover the intended region without overlap.
Frequently Asked Questions
What is the formula for base times height?
For a triangle, area equals base times perpendicular height divided by 2: A = bh/2. For a rectangle or parallelogram, area is base times perpendicular height without dividing by 2.
Does the height have to be inside the triangle?
No. In an obtuse triangle, the perpendicular from the opposite vertex may meet an extension of the chosen base. Its length is still the triangle’s height.
Can I use any side as the base?
Yes. Choose any side, then use the perpendicular height corresponding to that side. Do not pair a side with a height measured for a different base.
What units does the calculator use?
The example uses centimetres and returns square centimetres. The calculation works with other units if both input lengths match; the area is expressed in the square of that unit.
Why does a triangle’s area use half of base times height?
A triangle with a given base and perpendicular height has half the area of a parallelogram with the same base and height. Two matching copies of the triangle can form that parallelogram.
Related
Formula used
in b | Base length | cm | 10 | 0 in h | Perpendicular height | cm | 6 | 0 out a | Triangle area | cm^2 | b * h / 2 | 2 out p | Base-height product | cm^2 | b * h | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline