molecalculator

Moles & Molar Mass

Convert CCF to Liters: Exact Formula & Calculator

Calculator No. 01-7218 · Updated · Formula and assumptions shown below

Volume in liters 2,831.68 L
Volume in cubic meters
2.832 m³
= Volume in CCF × 2.8316846592
Volume in US gallons
264.17 gal
= Volume in CCF × 264.172052358
Volume in CCF
1 CCF
Set in the form below
You enter
Volume in CCF (CCF)
You get
Volume in liters (L), Volume in cubic meters (m³), Volume in US gallons (gal)
Rounding
2 dp · 3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One CCF (100 cubic feet) equals exactly 2,831.6846592 liters. To convert CCF to liters, multiply the number of CCF by 2,831.68 (rounded to two decimals). This page gives you the precise conversion factor, a calculator for any volume, and the context you need to understand why water and gas bills use this odd unit.

Formula

The conversion rests on two fixed definitions:

  • 1 CCF = 100 cubic feet (the “C” stands for “centum,” Latin for hundred)
  • 1 foot = 0.3048 meters (exact, by international agreement)

Therefore:

Liters = CCF × 100 × (0.3048)³ × 1000

Worked out: (0.3048)³ = 0.028316846592 m³ per cubic foot, times 100 = 2.8316846592 m³ per CCF, times 1000 L/m³ = 2,831.6846592 liters.

Worked Example

Using the calculator defaults (1 CCF):

  1. Start with 1 CCF.
  2. Convert CCF to cubic feet: 1 × 100 = 100 ft³.
  3. Convert cubic feet to cubic meters: 100 × 0.028316846592 = 2.8316846592 m³.
  4. Convert cubic meters to liters: 2.8316846592 × 1000 = 2,831.6846592 L.

Rounded to two decimals: 2,831.68 liters. The calculator shows the same value.

Assumptions

  • The conversion uses the international foot (exactly 0.3048 m), which is the standard in the US and UK for utility billing.
  • “CCF” always means 100 cubic feet, not 100 cubic meters (that would be “m³” or “CM”).
  • Liters are defined as exactly 1/1000 of a cubic meter, so no temperature or pressure correction applies for volume conversion.

Why CCF Exists

CCF is a billing unit used by US water utilities and natural gas companies. Water meters measure flow in cubic feet, and a single-family home typically uses 8–12 CCF per month. Reporting in CCF keeps the numbers manageable—100 cubic feet is about the volume of a 6-foot-by-6-foot-by-3-foot box, roughly the size of a large refrigerator. Gas utilities use the same unit because gas meters are volumetric, though the energy content of gas is billed separately in therms. If you see “CCF” on a bill, it is always 100 ft³, never 100 m³.

How to Read Your Utility Bill

When your water bill says you used 9 CCF, that is 9 × 2,831.68 = 25,485 liters. To put that in perspective:

  • A standard bathtub holds about 150–200 liters.
  • A 10-minute shower uses roughly 100 liters with a low-flow head.
  • A toilet flush is 6 liters (older models) or 4.8 liters (newer).

So 9 CCF ≈ 25,485 liters ≈ about 170 bathtubs or 4,200 flushes. If you are comparing your usage to a friend in a metric country, convert their cubic meters to CCF by dividing by 2.83168—1 m³ is about 0.353 CCF.

Common Mistakes and Misconceptions

The most frequent error is confusing CCF with MCF (1,000 cubic feet) or with cubic meters. MCF is 10 times larger than CCF. Another mix-up: some people assume 1 CCF = 100 liters because “centum” sounds like “centi,” but the C refers to the hundred multiplier on feet, not liters. Also remember that gas bills sometimes show “CCF” alongside “therms”—the therm is a heat unit (100,000 BTU), not a volume, so you cannot convert CCF to therms without knowing the gas heating value (typically about 1.037 therms per CCF for natural gas, but this varies by composition and pressure).

Rounding matters: using 2,831.68 instead of the full 2,831.6846592 introduces an error of about 0.005 liters per CCF—negligible for home use, but for a large industrial account using 10,000 CCF, the difference is 46 liters, which could matter for inventory.

Converting in the Other Direction

To convert liters back to CCF, divide by 2,831.6846592. For example, a 1,000-liter water tank is 1,000 ÷ 2,831.68 = 0.353 CCF. If your pool holds 75,700 liters (20,000 gallons), that is 75,700 ÷ 2,831.68 = 26.73 CCF. This reverse conversion is what you need when comparing a metric water meter reading to a US-style bill.

Practical Reference Table

Here are common volumes in both units:

  • 0.1 CCF = 283.17 liters (about 1.5 bathtubs)
  • 0.5 CCF = 1,415.84 liters (about 7 bathtubs)
  • 1 CCF = 2,831.68 liters
  • 2 CCF = 5,663.37 liters (about 28,317 gallons? No—2 CCF = 528.34 US gallons)
  • 10 CCF = 28,316.85 liters (about 7,481 gallons)

Note the gallon figure: 1 CCF = 748.05 US gallons (not 100 gallons, which is a common guess). The 7.48 gallons per cubic foot factor is worth memorizing for quick estimates.

Frequently Asked Questions

How many liters are in 1 CCF of water?

Exactly 2,831.6846592 liters. For billing purposes, utilities round to 2,831.68 or even 2,832 liters. The mass of that water at 4 °C (maximum density) is 2,831.68 kg, or about 6,243 pounds.

Is CCF the same as cubic meters?

No. CCF is 100 cubic feet, which equals 2.83168 cubic meters. A cubic meter is about 35.31 cubic feet, so 1 m³ is roughly 0.353 CCF. They differ by a factor of about 2.83.

Why does my gas bill use CCF instead of therms?

Gas meters measure volume, so the utility records CCF at the meter. The bill then converts to therms using the gas’s heating value (about 1.037 therms per CCF for typical natural gas) to charge for energy, not volume. The CCF appears on the bill because that is what the meter physically counted.

How do I convert CCF to gallons?

Multiply CCF by 748.05 for US gallons, or by 622.88 for imperial gallons. For example, 1 CCF = 748.05 US gallons. This is useful for pool sizing or irrigation planning.

Does temperature affect the CCF-to-liter conversion?

No, because liters and cubic feet are both units of volume, not mass. However, if you are converting gas volume to mass or energy, temperature and pressure matter greatly—gas utilities correct readings to standard conditions (usually 60 °F and 14.73 psi) before billing.

What is the difference between CCF and HCF?

None. HCF stands for “hundred cubic feet” and is the same as CCF. Some utilities write HCF to avoid Latin; the “C” in CCF and the “H” in HCF both mean 100. The numbers are identical.

Related

Formula used
in ccf | Volume in CCF | CCF | 1 | 0 | 1000000
out l | Volume in liters | L | ccf * 2831.6846592 | 2
out m3 | Volume in cubic meters | m³ | ccf * 2.8316846592 | 3
out gal | Volume in US gallons | gal | ccf * 264.172052358 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →