The half-life decay constant equation links the half-life (t½) of a radioactive isotope to its decay constant (λ) through the simple relation t½ = ln(2) / λ, or equivalently λ = ln(2) / t½. This equation applies to any first-order exponential decay process, including radioactive decay, drug elimination, and certain chemical reactions.
Formula
The decay constant λ is the probability per unit time that a single nucleus will decay. It appears in the exponential decay law:
N(t) = N₀ e−λt
where N(t) is the number of undecayed nuclei at time t, N₀ is the initial number, and e is Euler’s number (≈2.71828). The half-life is the time required for N to drop to half of N₀, so setting N(t½) = N₀/2 gives:
N₀/2 = N₀ e−λt½
Dividing by N₀ and taking the natural logarithm: ln(1/2) = −λt½, hence t½ = ln(2)/λ. The mean lifetime τ (the average time a nucleus survives) is τ = 1/λ, so t½ = τ ln(2).
Worked Example
Carbon-14 has a half-life of 5730 years. Using the calculator’s default, t½ = 5730 s (the calculator uses seconds, but the math is identical for any time unit).
- ln(2) ≈ 0.693147
- λ = 0.693147 / 5730 = 0.00012097 s⁻¹
- τ = 1 / λ = 5730 / 0.693147 ≈ 8267 s
The calculator shows λ = 0.000121 s⁻¹ (rounded to 6 decimal places) and τ = 8267 s. For real carbon-14 dating, you would use years: λ = 0.693147 / 5730 yr = 1.2097 × 10−4 yr⁻¹.
Assumptions
- Decay is a first-order process: the rate is proportional to the number of undecayed nuclei.
- The decay constant λ is constant over time (no environmental influence).
- No new nuclei are added or removed except by decay.
- All nuclei of the same isotope have the same decay probability.
How to Choose the Right Equation
If you know the half-life and want the decay constant, use λ = ln(2)/t½. If you know the decay constant and want the half-life, use t½ = ln(2)/λ. For activity (A = λN), you need the number of nuclei N, which often comes from mass and molar mass. For a sample with multiple isotopes, each has its own λ and t½; you cannot combine them into a single constant unless you treat the total activity as a sum of exponentials.
Common Mistakes and Misconceptions
- Unit mix-ups: If t½ is in years, λ is in yr⁻¹, not s⁻¹. Always keep time units consistent.
- Confusing half-life with mean lifetime: τ = 1/λ is longer than t½ by a factor of 1/ln(2) ≈ 1.4427. Many students mix these up.
- Using ln(2) instead of ln(1/2): The decay constant is positive; the negative sign appears in the exponent, not in λ.
- Assuming all decay is exponential: Some processes (e.g., second-order reactions) have a different time dependence, so the half-life depends on initial concentration.
Real-World Applications
Carbon-14 dating uses the half-life of 5730 years to estimate the age of organic materials. Potassium-40 (t½ ≈ 1.25 × 109 yr) helps date rocks. In medicine, technetium-99m (t½ ≈ 6 hours) is used for imaging because its short half-life limits radiation exposure. In pharmacokinetics, the elimination half-life of a drug (often 1–24 hours) determines dosing intervals; the same equation applies.
Limitations of the Simple Equation
The equation assumes a closed system with no production of the isotope. In a nuclear reactor, for example, isotopes are continuously produced, so the net change is not a simple exponential decay. Also, at extremely small numbers of atoms, statistical fluctuations become significant; the law of large numbers ensures the equation works for macroscopic samples (e.g., 1020 atoms) but not for a single atom. For very short half-lives (femtoseconds), measurement techniques may introduce uncertainty, but the equation still holds.
Frequently Asked Questions
What is the difference between decay constant and half-life? The decay constant λ is the probability per unit time that a nucleus decays (units of s⁻¹), while half-life t½ is the time for half the sample to decay (units of time). They are inversely related: t½ = ln(2)/λ.
Why is ln(2) used in the equation? Because half-life is defined as the time to reduce to half (N/N₀ = 1/2). Taking the natural logarithm of 1/2 gives −ln(2), and the negative sign is absorbed into the exponential, leaving λ = ln(2)/t½.
Can I use this equation for non-radioactive processes? Yes, any first-order process with a constant rate constant k has a half-life t½ = ln(2)/k. Examples include chemical reactions (first-order) and drug elimination from the body.
How do I convert half-life from years to seconds? Multiply by 365.25 days/year × 24 h/day × 3600 s/h ≈ 3.156 × 107 s/year. Then use λ = ln(2)/t½ with the result in seconds.
What if I have the decay constant but want the fraction remaining after a certain time? Use N(t)/N₀ = e−λt. For example, after 3 half-lives, the fraction is e−3 ln(2) = 1/8 = 0.125.
Related
Formula used
in t12 | Half-life (t½) | s | 5730 | 1e-6 out lambda | Decay constant (λ) | s⁻¹ | 0.693147 / t12 | 6 out tau | Mean lifetime (τ) | s | t12 / 0.693147 | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Decay Constant: How to Calculate It0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Half-Life Games in Order: Full Release Timeline