Log base e is the natural logarithm, written ln(x), and it tells you the power that e must be raised to in order to produce x. Use this calculator to enter a positive number and get its natural logarithm; you can also follow the steps to find the ln function on a scientific calculator.
Formula
The natural logarithm is the logarithm to base e:
ln(x) = loge(x)
This means that if ln(x) = y, then ey = x. Here, x is the positive input number (dimensionless in this calculator), e is Euler’s number, approximately 2.718281828, and y is the natural logarithm result. A real-valued natural logarithm is defined only for x > 0.
The calculator’s second result checks the calculation by raising e to the answer: eln(x) = x. Small differences in the displayed check can occur because results are rounded.
Worked Example
Using the default input, x = 1:
- Apply the natural-log formula: ln(1).
- Find the power y for which ey = 1. Since e0 = 1, y = 0.
- The calculator displays ln(1) = 0.0000.
- Check: exp(0) = 1.0000, which matches the input.
For a familiar non-default example, ln(e) = 1 because e1 = e. On a calculator, enter e using its dedicated key or use its stored value if available, then apply ln.
Assumptions
- The input is a positive, dimensionless real number; zero and negative values do not have real natural logarithms.
- The calculator evaluates the natural logarithm directly, using the calculator’s numerical precision.
- The displayed results are rounded to four decimal places; the underlying calculation may retain more precision.
What You’ll Need
- A scientific calculator with an ln key, or a calculator app that provides natural logarithms.
- The positive number whose natural logarithm you want to calculate.
- If using a basic calculator without an ln key, access to a calculator with a scientific-functions mode. The log base-change method is another option if common logarithms are available.
Step-by-Step
- Check the number. Make sure the value is greater than zero. For example, 5, 0.2, and e are valid inputs; 0 and −5 are not valid real-number inputs for ln.
- Locate the natural-log function. Look for a key marked ln. It is different from log, which usually means base 10. Some calculators show ln as a shifted function above another key; press the appropriate shift or secondary-function button to access it.
- Choose the input order your calculator uses. On many scientific calculators, type the number first and then press ln. On others, press ln first, enter the number in the brackets or on the screen, and then press the equals key. Follow the display: if it shows ln(, type the number and close the bracket if needed.
- Enter the complete number. Include a decimal point where necessary. For scientific notation, use the calculator’s EXP, EE, or ×10x key rather than typing “× 10” as ordinary multiplication. For example, 3.2 × 104 is entered as 3.2, EXP, 4 on calculators with an EXP key.
- Evaluate the expression. Press equals if your calculator does not calculate immediately. Read the result as ln(x), not as x itself. For instance, ln(2) is approximately 0.6931.
- Check that the answer makes sense. If x = 1, the answer should be 0. If x is greater than 1, ln(x) is positive; if x is between 0 and 1, ln(x) is negative. You can also enter e raised to the displayed result; it should return approximately to your original input.
- Record enough digits. Keep the calculator’s unrounded result for later calculations when possible. Round only at the end, based on the precision needed for your work.
Common Mistakes
- Using log instead of ln: On most calculators, log means base 10, not base e. Use ln when the calculation specifically calls for log base e.
- Entering zero or a negative number: ln(0) is undefined, and ln of a negative number has no real-valued result. A calculator may show an error or a complex result if it supports complex arithmetic.
- Pressing keys in the wrong order: Some models use number then ln, while others open an ln( expression first. Check the screen and the calculator’s instructions rather than assuming all keypads behave alike.
- Misreading the exponent entry: The EXP or EE key usually enters “times ten to the power of.” It does not mean that the whole number is being raised to a power. Check the displayed scientific notation before calculating.
- Rounding too early: A rounded ln value can make later calculations less accurate. Keep extra digits through intermediate steps, then round the final answer.
- Confusing ln(x) with 1/x: The natural logarithm is not the reciprocal. Use the ln function, not the reciprocal key.
Tips
- Remember the inverse relationship: ln(x) = y exactly when ey = x. This is the quickest way to understand or check a result.
- Use simple landmarks to catch errors: ln(1) = 0, ln(e) = 1, and ln(e2) = 2. Also, ln(10) is about 2.3026, not 1.
- For numbers close to 1, the answer is close to 0. Values below 1 have negative natural logarithms, which is normal rather than an error.
- If your calculator has an ln function but you need log base 10, use log instead. If you need a different base b, use the change-of-base formula below.
- When copying a result into another calculation, use the calculator’s answer key if available. This avoids transcription mistakes and may preserve more digits than the display shows.
Troubleshooting
The calculator shows Math ERROR or a domain error. Check that the value inside ln is strictly positive. Confirm that a minus sign was not entered accidentally, and make sure scientific notation has the intended exponent.
The screen shows a different answer than expected. Verify that you pressed ln rather than log, and review the number as it appears on screen. If the value is in scientific notation, confirm the exponent and decimal placement.
There is no ln key. If the calculator has a common-log key, calculate ln(x) = log10(x) ÷ log10(e). Since log10(e) is approximately 0.43429448, you can also calculate log(x) ÷ 0.43429448. For a different logarithm base b, use logb(x) = ln(x) ÷ ln(b), or log(x) ÷ log(b), using the same log key in numerator and denominator.
The result has a minus sign. If the input is between 0 and 1, a negative result is correct. For example, ln(0.5) is approximately −0.6931. Recheck the input if you expected a positive result.
The result seems close but not identical to a reference. Check whether the reference rounds to fewer digits, uses a different logarithm base, or rounded an intermediate value. Compare more digits before deciding there is an error.
Frequently Asked Questions
What does log base e mean?
It means a logarithm whose base is Euler’s number, e ≈ 2.718281828. It is written ln(x) or loge(x).
Is ln the same as log?
Not necessarily. On most calculators, ln means base e, while log means base 10. In some mathematics contexts, “log” may mean the natural logarithm, so check the convention being used.
How do I calculate ln without an ln button?
Use the change-of-base formula. With a base-10 log key, ln(x) = log(x) ÷ log(e). Use the same log function for both parts.
Why is ln of a number less than 1 negative?
Because e raised to a negative power produces a value between 0 and 1. For example, e−0.6931 is approximately 0.5, so ln(0.5) is approximately −0.6931.
Can I take the natural log of zero or a negative number?
Not as a real-valued calculation. ln(0) is undefined, and negative inputs require complex-number mathematics rather than the ordinary real ln function.
How can I check my answer?
Raise e to the answer. If the result is close to the original input, the calculation is consistent: eln(x) = x.
Related
Formula used
in x | Positive number x | - | 1 | 0.000000000001 out lnx | Natural logarithm ln(x) | - | ln(x) | 4 out check | Check: e raised to ln(x) | - | exp(lnx) | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline