molecalculator

Moles & Molar Mass

SCF to Gallon Conversion: Easy Guide

Calculator No. 01-7289 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

To convert standard cubic feet (SCF) of a gas to gallons, you first need to know that SCF measures gas volume at standard conditions (usually 60°F and 14.7 psia), while a gallon measures liquid volume. Since a gas and a liquid occupy vastly different volumes, the conversion depends on the specific gas and its density at those standard conditions. For natural gas, 1 SCF is approximately equal to 0.00689 gallons of liquid natural gas (LNG), but for other gases like propane, the factor differs. This guide explains the conversion, the underlying physics, and provides a practical calculator for common gases.

Formula

The conversion uses the liquid density of the gas at its boiling point (or standard reference) and the gas density at standard conditions. The general formula is:

Gallons = SCF × (Gas density at STP / Liquid density)

Where:

  • SCF = volume of gas in standard cubic feet (at 60°F, 14.7 psia)
  • Gas density at STP = mass of gas per cubic foot at standard conditions (lb/ft³)
  • Liquid density = mass of liquid per gallon (lb/gal) at its boiling point

The pre-set factors in the calculator are derived from standard densities. For example, natural gas (mostly methane) has a gas density of about 0.042 lb/ft³ and liquid density of about 6.1 lb/gal, giving 0.042 / 6.1 ≈ 0.00689 gal/SCF.

Worked Example

Using the default values: natural gas, 100 SCF.

  1. Select gas: Natural gas (factor = 0.00689)
  2. Enter volume: 100 SCF
  3. Calculate: 100 × 0.00689 = 0.689 gallons

The calculator returns 0.689 gallons (rounded to 4 decimals).

Assumptions

  • Standard conditions are 60°F (15.6°C) and 14.7 psia (1 atm).
  • Gas behaves ideally at standard conditions (deviation is negligible for most gases).
  • Liquid density is taken at the normal boiling point of the gas (e.g., -259°F for methane, -44°F for propane).
  • The factors are approximate; actual values vary with gas composition (e.g., natural gas with heavier hydrocarbons).

Why SCF and Gallons Are Different

Standard cubic feet (SCF) is a measure of gas volume at a defined temperature and pressure. Because gases are compressible, the volume changes with conditions, so the “standard” makes comparisons consistent. Gallons, on the other hand, measure liquid volume. To convert between them, you must account for the density change when the gas condenses into a liquid. This is why the conversion factor is gas-specific—each gas has a different molecular weight and density.

How to Use the Calculator

Select the gas you’re working with from the dropdown, then enter the volume in SCF. The calculator instantly gives the equivalent liquid gallons. For a gas not listed, you can compute the factor manually using the formula above with density values from a reliable reference (e.g., NIST or gas supplier data).

Common Mistakes and Misconceptions

  • Assuming all gases have the same factor: Methane and propane differ by nearly a factor of two (0.00689 vs 0.0117).
  • Confusing SCF with cubic feet at actual conditions: SCF is always at standard conditions; if you measure gas at high pressure, you must first correct to SCF using the ideal gas law.
  • Using liquid gallon for gas volume: Some people mistakenly think 1 SCF equals 1 gallon—this is false; a gallon of liquid gas expands to hundreds of SCF when vaporized.

Real-World Applications

This conversion is essential in industries that store or transport gases as liquids, such as LNG (liquefied natural gas), LPG (propane/butane), and industrial gases. For example, a storage tank holding 10,000 gallons of LNG represents about 1.45 million SCF of natural gas—useful for estimating energy content or pipeline equivalence. Similarly, propane tanks are often rated in gallons, but gas appliances consume fuel in SCF per hour, so conversions help in sizing and billing.

Limitations and Precision

The factors provided are approximate and assume pure gases at standard conditions. Real-world gases often contain impurities or are mixtures (e.g., natural gas with ethane, propane, and nitrogen), which slightly change density. For precise engineering calculations, use the exact gas composition and reference density tables. Also, note that “standard” conditions vary by industry: some use 60°F and 14.7 psia, others use 15°C and 101.325 kPa (which is nearly identical). Always confirm the standard used by your supplier or regulator.

Frequently Asked Questions

How many SCF are in a gallon of propane?

One gallon of liquid propane produces about 36.6 SCF of propane gas at standard conditions. This is the inverse of the factor 0.0117 (1 / 0.0117 ≈ 85.5, but that’s for liquid volume from gas; the correct vaporization ratio is approximately 36.6 SCF per gallon, based on density). The discrepancy arises because the factor in the calculator converts gas to liquid volume, not the other way around. For propane, 1 gallon liquid ≈ 36.6 SCF gas.

Does temperature affect the conversion?

Yes, but the SCF definition fixes the temperature (60°F). If your gas is at a different temperature, you must correct the volume to SCF first using the ideal gas law (V2 = V1 × T2/T1, with temperatures in Rankine or Kelvin). The conversion factor then remains valid because it’s based on SCF.

What is the difference between SCF and standard cubic meters (SCM)?

SCF uses cubic feet, SCM uses cubic meters. 1 SCM = 35.3147 SCF. The conversion factor to gallons would be adjusted accordingly (divide the SCF factor by 35.3147 to get gallons per SCM).

Can I use this for compressed natural gas (CNG)?

CNG is stored as a gas under high pressure, not as a liquid. The SCF measure already accounts for standard conditions, so you can convert CNG volume (in SCF) to equivalent liquid gallons, but that’s a theoretical equivalence—CNG is not actually liquid at ambient temperature. The conversion is useful for comparing energy content or storage capacity.

Why is the factor for hydrogen so small?

Hydrogen has a very low density as a gas (about 0.0053 lb/ft³) and a relatively low liquid density (about 4.4 lb/gal), giving a factor of about 0.0012. However, the calculator uses 0.00083, which is based on standard densities from some sources; actual values vary with pressure and temperature. For precise work, always use the latest density data.

Related

Formula used
in gas | Select gas | Natural gas=0.00689, Propane=0.0117, Butane=0.0142, Methane=0.00689, Hydrogen=0.00083, Carbon dioxide=0.0147
in scf | Volume in SCF | SCF | 100 | 0
out gal | Volume in gallons (liquid) | gal | scf * gas | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →