molecalculator

Moles & Molar Mass

Barrel to Liters Conversion: Quick Guide

Calculator No. 01-7211 · Updated · Formula and assumptions shown below

Liters 158.99 L
US gallons
42.00 gal
= Liters ÷ 3.785411784
Barrels (oil)
1 bbl
Set in the form below
Barrel type
158.987 Oil=158.987, US liquid=119.24, US federal=117.35, US dry=115.63, UK=163.66
Set in the form below
You enter
Barrels (oil) (bbl), Barrel type (Oil=158.987, US liquid=119.24, US federal=117.35, US dry=115.63, UK=163.66)
You get
Liters (L), US gallons (gal)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One standard oil barrel equals exactly 158.987294928 liters (usually rounded to 158.99 L). To convert barrels to liters, multiply the number of barrels by 158.987; to convert liters to barrels, divide by the same number. This page explains the different barrel definitions, gives worked examples, and shows how to avoid the most common unit mix-ups.

Formula

The conversion formula is straightforward:

Liters = Barrels × Liters per barrel

Where the “liters per barrel” depends on which barrel you mean:

  • Oil barrel (bbl): 158.987294928 L (exactly 42 US gallons)
  • US liquid barrel: 119.240471196 L (31.5 US gallons)
  • US federal barrel: 117.347765304 L (31 US gallons)
  • US dry barrel: 115.628198985 L (105 dry quarts)
  • UK barrel (imperial): 163.65924 L (36 imperial gallons)

All values are exact by definition, based on the gallon or quart they derive from. The calculator above defaults to the oil barrel because it is the most common in trade and news.

Worked Example

Convert 1 oil barrel to liters, using the default value in the calculator.

  1. Start with the number of barrels: 1 bbl
  2. Multiply by the oil barrel factor: 1 × 158.987294928 = 158.987294928 L
  3. Round to two decimals: 158.99 L

Now convert that to US gallons: 158.987294928 ÷ 3.785411784 = 42.00 gal. That matches the definition of the oil barrel as exactly 42 US gallons.

Assumptions

  • The conversion uses the exact legal definitions of each barrel type, not approximate historical volumes.
  • Temperature and pressure do not affect the conversion because it is a volume-to-volume unit change, not a mass or gas calculation.
  • For crude oil, the mass (in metric tons) depends on API gravity, so this calculator only gives volume in liters, not weight.

Why Are There So Many “Barrels”?

The word “barrel” has been used for centuries as a unit of volume for everything from wine to herring. Different countries and industries standardized different sizes. The most famous is the oil barrel (bbl), set at 42 US gallons in the 1860s by early Pennsylvania oil producers. They chose 42 gallons because it was the size of the wooden barrels used to ship fish, whiskey, and other goods at the time, and it became the industry standard.

Other barrels persist in specific contexts:

  • US liquid barrel – used for some beverages and chemicals.
  • US dry barrel – used for agricultural commodities like cranberries.
  • UK barrel – based on imperial gallons, used in some Commonwealth countries.

When you read “barrel” in a news headline about oil, it is almost always the 42-gallon oil barrel. But in a recipe or a historical document, it could be any of the others. Always check which definition applies.

How to Convert Barrels to Liters Correctly

The conversion is a simple multiplication, but the risk is picking the wrong barrel factor. Follow these steps:

  1. Identify the barrel type from the context (oil, US liquid, US dry, UK).
  2. Look up the exact liters per barrel for that type (use the table above).
  3. Multiply the number of barrels by that factor.
  4. Round to a sensible number of decimals – two is usually enough for practical purposes.

For example, convert 5 US liquid barrels to liters: 5 × 119.240471196 = 596.20 L. If you had used the oil barrel factor, you would get 794.94 L – a 33% error. That is why the barrel type matters.

Common Mistakes and Misconceptions

A frequent error is assuming “barrel” always means the oil barrel. In the United States, a “barrel” in many legal and commercial contexts is the 31-gallon liquid barrel, not 42 gallons. Another mistake is mixing up US and imperial gallons – the UK barrel is about 3% larger than the US oil barrel.

Another misconception: the oil barrel is sometimes confused with the metric ton of oil equivalent (toe), which is an energy unit, not a volume. One toe is roughly 7.33 barrels of oil equivalent in energy content, but that is a completely different conversion.

Finally, do not confuse volume barrels with weight. A barrel of oil weighs about 136 kg (300 lb) for light crude, but that varies with density. The conversion to liters does not involve mass.

Practical Uses and Examples

You might need this conversion for:

  • Reading oil production statistics (e.g., “the field produces 10,000 bbl/day” → 1,589,873 L/day).
  • Purchasing bulk liquids in barrels and needing liters for storage tanks.
  • Converting historical recipes or brewing records that use barrels.
  • Comparing fuel prices quoted per barrel to per liter.

Example: A small brewery buys 2 UK barrels of ale. How many liters? 2 × 163.65924 = 327.32 L. If they mistakenly used the US liquid barrel, they would get only 238.48 L – a significant shortage.

Frequently Asked Questions

How many liters in a barrel of oil?
Exactly 158.987294928 liters, which is 42 US gallons. For everyday use, round to 159 L.

Is a barrel always 42 gallons?
No. The 42-gallon barrel is specifically the oil barrel (bbl). Other barrels have different sizes: US liquid barrel is 31.5 gallons, US dry barrel is 26.25 gallons (105 quarts), and the UK barrel is 36 imperial gallons.

How do I convert liters to barrels?
Divide the number of liters by the liters per barrel for the type you need. For oil, divide by 158.987. For example, 1000 L ÷ 158.987 = 6.29 bbl.

Why is the oil barrel 42 gallons?
It originated in the 1860s in Pennsylvania when wooden barrels of that size were commonly used for shipping goods like fish and whiskey. Oil producers adopted the same size for consistency.

Does the conversion change with temperature?
For volume, no – a liter is a fixed volume. But if you are measuring a real liquid, its volume can expand or contract with temperature, so the actual number of liters you get from a barrel at a given temperature may vary slightly. For standard conversions, the defined volume is used.

What is the difference between a barrel and a cubic meter?
A cubic meter is 1000 liters. An oil barrel is about 0.159 cubic meters. So 1 cubic meter equals about 6.29 oil barrels.

Safety and Accuracy Notes

When converting volumes for industrial or commercial use, always verify the exact barrel definition from the source. For lab work, use a calibrated container and note the temperature. If you are handling crude oil or other hazardous liquids, follow your facility’s safety procedures and the safety data sheet (SDS) for the material. This calculator is for unit conversion only and does not replace proper measurement practices.

Related

Formula used
in bbl | Barrels (oil) | bbl | 1 | 0
in unit | Barrel type | Oil=158.987, US liquid=119.24, US federal=117.35, US dry=115.63, UK=163.66 | 158.987
out l | Liters | L | bbl * unit | 2
out gal | US gallons | gal | l / 3.785411784 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →