molecalculator

Moles & Molar Mass

Half-Life Enemies: All Factions & How to Beat Them

Calculator No. 01-7053 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

In the Half-Life series, enemies are the hostile creatures and soldiers you fight, primarily the alien Xen forces (Headcrabs, Zombies, Vortigaunts) and the human HECU marines, plus later Combine forces in Half-Life 2. This guide covers every major enemy type, their behavior, and the best strategies to defeat them.

Formula

The calculator above computes the molarity (concentration) of a solution from the mass of solute, its molar mass, and the final solution volume. The formula is:

c = m / (M × V)

  • c = molarity (mol/L)
  • m = mass of solute (g)
  • M = molar mass (g/mol)
  • V = final solution volume (L), converted from mL by dividing by 1000

Worked Example

Using the default values: dissolve 2.922 g of NaCl (molar mass 58.44 g/mol) in enough water to make 250 mL of solution.

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles of NaCl: 2.922 g ÷ 58.44 g/mol = 0.05000 mol
  3. Divide moles by volume: 0.05000 mol ÷ 0.250 L = 0.2000 mol/L

The molarity is 0.2000 mol/L (or 200.0 mM).

Assumptions

  • The solute is completely dissolved and does not react with the solvent.
  • The final volume is used, not the volume of solvent added (i.e., you add solute then fill to the mark).
  • The solution is at room temperature (density changes are ignored).

When to Use This Calculation

You need this whenever you prepare a solution of known concentration for a lab experiment, such as making a buffer, a culture medium, or a reagent. It is the standard way to express concentration in chemistry and biology.

How to Read the Result

The result tells you how many moles of solute are in each liter of solution. For example, 0.2000 mol/L means 0.2000 moles of NaCl per liter. The millimolar output (mM) is simply the molarity multiplied by 1000, often used for smaller concentrations.

Common Mistakes

  • Using solvent volume instead of final volume: If you add 250 mL of water to 2.922 g of NaCl, the final volume will be slightly more than 250 mL. Always dissolve the solute in less water, then add water to reach the exact final volume.
  • Forgetting to convert mL to L: The formula requires liters. Dividing by 1000 is essential.
  • Using the wrong molar mass: Check the formula of the compound (e.g., NaCl vs. CaCl2). For hydrates, include the water of hydration in the molar mass.

Limitations of the Formula

This formula assumes ideal behavior—it works well for dilute solutions. For concentrated solutions, the volume may not be perfectly additive, and the density changes. Also, for electrolytes, the actual ionic strength may differ, but molarity remains the defined concentration.

Frequently Asked Questions

How do I calculate molarity if I only have the mass and volume?
Use the same formula: divide the mass by the molar mass to get moles, then divide by the volume in liters.

What is the difference between molarity and molality?
Molarity is moles per liter of solution; molality is moles per kilogram of solvent. Molality is temperature-independent, while molarity changes with temperature because volume changes.

Can I use this calculator for any solute?
Yes, as long as you know the molar mass. For compounds that dissociate (like salts), the molarity of the compound is still calculated this way; the concentration of individual ions will be different.

Why do I need to use final volume and not the volume of solvent?
Because the solute takes up space. If you add 250 mL of water to a solid, the final volume might be 252 mL. Using the final volume gives the correct molarity.

What if my solute is a liquid?
You can still use the same formula if you know the mass of the liquid added. If you have a volume of liquid, you need its density to convert to mass first.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →